漳州市東方智慧型儀器表有限公司

 This analog meter is a rectifier type,permanent-magnet moving coil instrument for measurements of DC voltage,AC voltage,DC current,resistance,battery and decibels.
The meter is to operate at an ambient temperature from 0&Omega; to 50&Omega; with a relative humidity of less than 85%. 

Analog Multimeter

Analog Multimeter for measuring DC/AC voltage, current, and resistance.

SHENZHEN VICIMETER TECHNOLOGY CO.,LTD.

CM-2030 3 1/2 AC Digital Clamp Meter  Features: 1. Clamp opens 52mm; 2. Large LCD display makes reading clear; 3. Full function protection, strong anti-interferential performance; 4. CE standard design, improves the safety of the test; 5. Data hold and NCV function; 6. Clamp light and backlight display.  Technical Data: Basic function Range Accuracy DCV 200mV/20V/1000V ±(0.5%+2) ACV 20V/750V ±(1.0%+5) ACA 200A/1000A ±(2.0%+5) Resistance 200Ω/2kΩ/20kΩ/200KΩ/2MΩ/20MΩ/200MΩ ±(0.8%+1) Temperature -40℃ to +1000℃ / -40℉ to +1832℉ ±(1.0%+5)  Special Function: Model CM-2030 NCV test √ Diode test √ Continuity test Less than 50Ω Low battery indicator Approx. less than 7.5 V Data hold √ Function protection √ Clamp light √ Backlight display optional Input impedance 10MΩ Sampling rate 3 times/s AC frequency response Current 50-60Hz/ voltage 40-200Hz Operation method Manual range Max display 1999 Clamp opens 52mm Battery 2PCS (1.5V) AAA  General Characteristic: Meter color Orange and Black. Meter weight About 280g (including battery) Meter size 270×123×35mm Standard accessory Test leads, battery, Temperature probe, manual Standard packing Gift box Carton size 55.8*30.5*40CM Standard QTY per carton 30pcs G.W per carton 16.8kg 

Vicimeter CM-2030 AC 1000A DC 1000V AC 750V 200MΩ Clamp Meter

Vicimeter CM 2030 AC clamp meter with large LCD display

CM-2000B 3 1/2 Digits Digital AC Clamp Meter  Features： 1. Clamp open 28mm 2. Portable design, easy use 3. Data hold, TRMS, Max/Min 4. CE standard design, improving the safety test 5. Non-contact voltage testing with visible alarm 6. Clamp light display, or backlight display (Optional) 7. Full function protection, strong anti-interferential performance  Technical Data: Basic function Range Accuracy DCV 200mV/2V/20V/200V/600V ±(,0.5%+5) ACV 2V/20V/200V/600V ±(1.0%+5) ACA 2A/20A/200A/600A ±(2.0%+5) Resistance 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ ±(0.8%+1)  Special Function: Model CM-2000B NCV √ TRMS √ Battery voltage test 20V Max./Min. √ Diode test √ Continuity alarm Less than 50Ω Low battery indication Approx. less than2.4 V Data hold √ Auto power off Approx. 15 minutes. Function protection √ Clamp light display √ Backlight display √ Input impedance 10MΩ Sampling rate 3 times/second AC frequency response Current (50~60)Hz, Voltage (50~400)Hz Operation method Manual or auto range Max. display 1999 Clamp open 28mm Power source 3V (2pcs #7 batteries)  General Characteristic: Meter color Orange body + Black clamp Meter weight 200g(including the batteries) Standard accessories Test leads, battery, English manual Standard package Gift box Meter size 185*65*32mm Standard qty per carton 40pcs   G.W. per carton 15KG Carton size 41.5x28x46.5CM  

Vicimeter CM-2000B AC 600A True RMS Clamp Meter

Vicimeter CM 2000B AC 600A True RMS Clamp Meter

CM-2016 AC/DC 3 5/6 counts Digital Clamp Meter  Features: Clamp opens 28mm Portable design, easy use Clamp light, Backlight, Flash light Large LCD display makes reading clear CE standard design, improves the safety of the test Full function protection, strong anti-interferential performance Duty cycle test, REL test, NCV, TRMS test, data hold, APO function  Technical Data: Basic function Range Accuracy DCV 600mV/6V/60V/600V ±(0.5%+5) ACV 6V/60V/600V ±(0.8%+5) DCA 60A/600A/800A ±(1.5%+5) ACA 60A/600A/800A ±(1.5%+5) Resistance 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ ±(0.8%+1) Capacitance 6nF/60nF/600nF/6uF/60uF/600uF/6mF/60mF ±(2.5%+5) Frequency 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz ±(0.5%+4) Temperature (-40 to 1000 )℃, (-40 to 1832 ) ℉ ±(1.0%+5)  Special Function: Model CM-2016 Diode test √ Continuity test Less than 50Ω Low battery indicator Low battery indicator Approx. less than 2.6 V Data hold √ NCV √ Auto power off About 15 minutes TRMS test √ Function protection √ Clamp light √ Backlight display √ Input impedance 10MΩ Sampling rate 3 times/s AC frequency response 40 to 2000Hz Operation method Auto or manual range Max display 6000 Clamp opens 28mm Battery 3V (2*AAA battery)  General Characteristic： Meter color Orange and Black Meter weight About 200g (including battery) Meter size 185*65*32mm Standard accessory Test leads, battery, manual, temperature probe, carrying case Standard packing Gift box Carton size 41.5*28*46.5CM Standard QTY per carton 40pcs    G.W per carton 15kg 

Vicimeter CM-2016 AC DC 800A Clamp Meter

Dongguan Habotest Instrument Technology Co., Ltd.

HT208A AC Digital Clamp Meter AC Current Voltage Resistance Capacitance,T-RMS Tester  This clamp meter is a portable, handheld professional meter that measures AC/DC voltage, AC current,Capacitance, resistance.    Features: Can measure AC/DC voltage, AC current, resistance , capacitance, duty, temperature, Frequency NCV and test continuity. Manual or Auto measurement function and range. Overload protection for the whole measurement range. LCD with double color light,when measuring big voltage and current, it automatically turns orange red color,more safe; Data hold function, low battery indication, auto power off. AC bandwidth, Diode test Suitable for electrical equipment testing and maintenance. 

Habotest HT208A AC Clamp Meter 1000A AC Current Voltage Resistance Capacitance / T-RMS Tester 

Habotest HT208A AC Clamp Meter for measuring current and voltage

CM-2056 AC/DC 3 3/4 Digital Clamp Meter Features: 1. Clamp opens 52mm; 2. Large LCD display makes reading clear; 3. Full function protection, strong anti-interferential performance; 4. CE standard design, improves the safety of the test; 5. Duty cycle test, REL test, data hold; TRMS, NCV; 6. Clamp light, backlight display.  Technical Data: Basic function Range Accuracy DCV 400mV/4V/40V/400V/1000V ±(0.5%+5) ACV 400mV/4V/40V/400V/750V ±(1.0%+5) DCA 40A/400A/1000A ±(2.0%+5) ACA 40A/400A/1000A ±(2.0%+5) Resistance 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ ±(0.8%+3) Capacitance 4nF/40nF/400nF/4μF/40μF/400μF/4mF/40mF ±(3.5%+10) Frequency 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz ±(0.5%+5) Temperature (-40~ 1000) ℃ （-40~1832℉） ±(1.0%+5) Special Function: Model CM-2056 NCV test √ True RMS test √ Diode test √ Continuity test Less than 30Ω Low battery indicator Approx. less than 2.4 V Data hold √ Auto power off About 15 minutes Function protection √ Clamp light √ Backlight display √ Input impedance 10MΩ Sampling rate 3 times/s AC frequency response 40-2kHz Operation method Auto or manual range Max display 4000 Clamp opens 52mm Battery 3V (2x1.5V AAA) General Characteristic: Meter color Orange and Black Meter weight About 280g (including battery) Meter size 270×123×35mm Standard accessory Test leads, battery, manual, TP01 temperature probe Standard packing Gift box + Black bag Carton size 55.8*30.5*40CM Standard QTY per carton 30pcs    G.W per carton 16.8kg 

Vicimeter 52mm Jaw CM-2056 1000A AC DC Clamp Meter

Vicimeter 52mm Jaw CM 2056 1000A AC DC Clamp Meter

科泰儀器（昆山）有限公司

The highly sensitive and accurate analogue multimeter is designed with a handy compact housing. Moreover, this portable analogue multimeter is designed with easy operating functions. It can be used for resistance measurement and has the continuity checking function. 	 AC / DC voltage, DC current measuremen 	 20 ranges in 7 functions 	 Suitable for using in current testing  

Analogue Multimeter

Analogue Multimeter for accurate resistance and current measurements

台灣納勝測器股份有限公司

   These ammeter can detect the VU level for consumer electronic products.   The internal resistance of the VU meter is 5 ohms~2300ohms.   The sensitivity of the VU meter is 100MA ~ 2MA.   The standard specification for the VU meter is 650 ohms 500ma.   The standard lamp type is 12v / 50mA transparent translucent or colour lamp is available.   There are different different color LED available.   The VU analog and panel meter has different shapes and sizes available.  

VU Meter

VU Meter for detecting VU levels in electronics

DM203 (DM204)3 3/4 Digital Clamp Multimeter  Features: 1. Clamp opens 35 mm; 2. Portable design, easy to operate. 3. Full function protection, anti high voltage circuit design 4. CE standard design, improves the safety of the test. 5. Max measuring capacitance, data hold, backlight. 6. NCV, True RMS test function.  Technical Data: Basic function Range Accuracy DCV 400mV/4V/40V/400V/600V ±(0.5%+5) ACV 4V/40V/400V/600V ±(1.0%+5) ACA 4A/40A/400A/600A ±(2.0%+5) Resistance 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ ±(0.8%+3) Capacitance 4nF/40nF/400nF/4μF/40μF/400μF/4mF/40mF ±(2.5%+5) Frequency 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz ±(0.5%+4) Temperature (-40 ~ 1000) ℃ | (-40 ~ 1832) ℉ ±(1.0%+5) Special Function: Model DM203 (DM204) NCV √ True RMS √ Diode test √ Backlight function √ Continuity alarming Less than 50Ω Low battery indication Approx. less than 2.4 V Data hold √ Auto power off About 15 minutes Function protection Full function protection Input impedance 10MΩ Sampling rate 3 times /s AC frequency response 40Hz-2kHz Operation method Manual or auto range Max. display 4000 Clamp opens 35mm Battery 3V (2×1.5V) General Characteristic: Color Orange and Black Weight About 200g (including the battery.) Dimension 195mm*65mm*33mm Standard accessory Test leads, battery, manual, TP01 temperature probe Packing Gift box Carton size 45.3*32.5*43CM Standard packing per carton 40 PCS    Standard G.W. per carton 14KG 

Vicimeter DM203 35mm Jaw AC 800A Clamp Meter

  11 ranges in 5 functions  AC current measurement up to 2000A , Ac voltage measurement up to 600 V, DC voltage measurement up to 300 V , Resistance measurement up to 200kΩ   Hold function  Clamp opening 57 mm   Power supply:1×1.5V,IEC LR03   Fuse 0.5A/250V   IEC 61010,CAT II/1000V   

Analogue Clamp meter

Analogue Clamp Meter with multiple measurement functions

龍程實業(香港)有限公司

 	 2000 counts LCD display 	 Manual range 	 DC / AC voltage 	 AC current 	 Diode test 	 Data hold 	 Low battery indication 	 Overload protection  

clamp meter

Suzhou TASI Electronics Co., Ltd.

Digital Clamp

Digital Clamp for measuring AC current up to 600A

漳州市華儀電子有限公司

 	 DCV ACV ACA OHM 	 Continuty Beeper: yes 	 Insulaton test: yes 	 Data Hold: yes 	 Power: 9V 6F22 	 Maximum Display: 1999 	 Display Size: 14 x 47mm 	 Product Net Weight: 320g 	 Product Size: 230 x 90 x 37(mm)  

Clamp Meter

Clamp Meter for accurate electrical measurements

Xi'An Beicheng Electronics Co.,Ltd

Digital Multimeter 

  20 Ranges in 4 functions  AC/DC voltage measurement up to 1000V  DC current measurement up to 10 A   Resistance measurement up to 20MΩ   LED Test , Acoustical continuity check  Power supply 1×9V, IEC 6F22 2×1.5V,IEC LR6/AA , Fuse 0.5 A/250 V, 10 A/250 V  IEC 61010, CAT II/600V  

High Accuracy Analogue Multimeter

Featured here is a highly sensitive and accurate multimeter in a handy, compact housing. The digital analog multimeter guarantees quick and easy measurement of AC/DC voltage, DC current and resistance. It makes an essential tool for electrical technicians. 	 Dual display (analog and LCD). 	 Overload protection. 	 19 range in 5 functions 	 AC/DC voltage measurement up to 500V. 	 DC current measurement up to 10A. 	 Resistance measurement up to 2M ohm. 	 Audible continuity tests. 	 Input impedance: 10M ohm. 	 Accessories: 9V battery, test leads, English manual, gift box. 	 AC Voltage: 200/500V. 	 DC Voltage: 0.2/2/20/200/500V.  

Digital Analog Multimeter

Digital Analog Multimeter for accurate AC DC measurements

漳州威華電子有限公司

DT201D Clamp Meter 1000A Clamp Ammeter, Frequency Clamp Meter

Product Name  Specifications environmental temperature: 23° C ± 5° C relative humidity: 80 % accuracy: ± (a% reading + b digit) DC voltage (manual range): 1000 V basic accuracy: ± (0.8 % rdg + 2 digits ) input impedance: 10 MOhm overload protection: 1000 V DC or 750 V AC rms AC voltage: 750 V basic accuracy: ± (1.0 % rdg + 3 digits) input impedance: 10 MOhm overload protection: 1000 V DC or 750 V AC rms frequency range: 40-500 Hz display: rms of sine wave value (average value) resistance: 0-200 Ohm / 20k Ohm basic accuracy: ± (1.0 % rdg + digits) resolution: 0.1 Ohm / 10 Ohm overload protection: 250 V DC or AC rms AC current: 0-200 A / 1000 A basic accuracy: ± (1.5 % rdg + 2 digits); ± (2.5 % + 5 digits) (800 A); ± (3.0 % rdg + 5 digits) (800 A) overload protection: AC 1200 A rms within 60 seconds frequency range: 40-100 Hz display: rms of sine wave value (average value) audible continuity measurement: built-in buzzer sounds of resistance is less than 50 Ohm test voltage: approx. 1.8 V overload protection: 250 V DC or AC rms display: 3 1/2 digit LCD manual range function: low battery display function: battery: 1.5 V x 2 AAA R03P (incl.) include battery and test leads: dimensions: 210 x 80 x 30 mm weight: 200 g insulation test: 20 M OHm / 2000 M Ohm basic accuracy: ± (2.0 % rdg + 5 digits); ± (4.0 % rdg + 5 digits) (500 M Ohm); ± (5.0 % rdg + 5 digits) (500 M Ohm)  

 Digital Clamp Meter RE266S

Digital Clamp Meter RE266S for accurate voltage and current measurements.

美特(中國)有限公司

  Introduction :  
Digital clamp meter integrated with AC / DC hall effect sensor, 3-3/4 Digit 6000 Count, True RMS, auto and manual measurement.

  Advance features :  
- Wide response band width.
- Large LCD display.
- Audible sound and visible indication during continuity check.
- Non-contact Frequency detection &lsquo;NCF&rsquo; 50 / 60 Hz
- Software calibrated.

  Specifications :  
- True RMS
- 6000 counts (3-3/4 digit)
- Auto / Manual &lsquo;V&rsquo; (600V AC)
- Auto / Manual &lsquo;V&rsquo; (AC ) with Hz / % selectable
- Auto / manual resistor measurement (60M&Omega;)
- Continuity check : &lt;50&Omega; Beep
- Diode check : 3.000 V
- 600A / 600A (AC / DC) current
- AC current with Hz / % selectable
- Capacitance : 10nF - 100mF
- Frequency 10Hz - 10MHz
- Hz / Duty cycle 1-99%
- &lsquo;NCV&rsquo; Non-Contact AC Voltage Detection (Audible and Visible) &gt; 100V : Numerical digital display AC voltage strength
- Freeze / Hold reading
- Auto power off : (5 mins)
- Anti Burn Protection (ABP) on full range and up to 250V (AC / DC) (NOT at &mu;A / mA CURRENT)
- &lsquo;NCF&rsquo; Non-Contact Frequency Detection
- Relative reading (Rel)
- Input impedance 10M&Omega;
- &lsquo; OL &rsquo; Over range display
- Low battery indication (2.6V approx.)
- Maximum Conductor diameter for measurement (mm) &lt; &Oslash;50
- Maximum open jaw (mm) : &Oslash;50
- Measurable temperature from thermocouple -50&deg;C ~ 1000 &deg;C (-58&deg;F ~1832&deg;F)&nbsp;
- &#39;K&#39; type temperature Ni-Cr and Ni-Si sensor, temperature range measurable -40&deg;C ~ 250&deg;C ( -40&deg;F ~ 482&deg;F) to be provided
- Battery powered : 1 x 3V (CR2032)
- Dimension (LxWxD) mm : 208x77x16
- Weight (approx.) grams : 140 (without battery)&nbsp;

Digital Clamp Meter with 6000 count 

SHANGHAI HONEYTEK ELECTRONIC INSTRUMENT CO., LTD

TheHK888E Solar PV Clamp Meter is a high-performance, multi-functional testing instrument specifically designed forphotovoltaic systems and high-voltage electrical environments. With measurement capabilities up to2000A current and 2000V DC voltage, it is ideal for engineers, installers, and maintenance professionals working insolar power systems, industrial electrical systems, and high-energy applications. Equipped withTrue RMS measurement, VFD compatibility, LoZ mode, and non-contact voltage detection (NCV), the HK888E ensures accurate readings even in complex and noisy environments. Its large jaw opening (Ø60.5mm), wide measurement range, and intelligent functions such asinrush current testing, peak hold, and MAX/MIN recording make it a reliable tool for both troubleshooting and system diagnostics. Designed with safety and usability in mind, the meter complies with CAT III 1500V / CAT IV 1000V standards, making it suitable for demanding field applications. Technical SpecificationsParameterRange / SpecificationAccuracy / DetailsModelHK888E2000A / 2000V AC/DC Solar PV Clamp MeterDisplay Counts6000 Counts—Max Jaw Open CapacityØ60.5mm—DC Voltage600mV±(0.5%+3)DC Voltage6.000V / 60.00V / 600.0V±(0.5%+5)DC Voltage2000V±(2.0%+5)AC Voltage6.000V / 60.00V / 600.0V±(1.0%+5)AC Voltage1500V±(2.0%+8)AC+DC Voltage6.000V / 60.00V / 600.0V±(1.5%+5)AC+DC Voltage1500V±(2.5%+8)DC Current60.0A / 600.0A±(2.0%+5)DC Current2000A±(2.5%+10)AC Current60.0A / 600.0A±(2.0%+5)AC Current2000A±(2.5%+10)AC+DC Current60.0A / 600.0A / 2000A±(3.0%+8)AC Current (Flex Clamp Sensor)600.0A / 3000A±(2.0%+5)Resistance600.0Ω±(1.0%+3)Resistance6.000kΩ / 60.00kΩ / 600.0kΩ±(1.0%+2)Resistance6.000MΩ / 60.00MΩ±(2.0%+8)Capacitance6.000nF / 60.00nF±(4.0%+5)Capacitance600.0nF / 6.000μF / 60.00μF / 600.0μF±(4.0%+5)Capacitance6.000mF / 60.00mF / 100mF±(10.0%+10)Frequency8Hz – 2000Hz±(0.1%+3)Temperature (°C)-40°C to 0°C±(1.0%+4)Temperature (°C)0°C to 400°C±(2.0%+3)Temperature (°C)400°C to 1300°C±(3.0%+3)Temperature (°F)-40°F to 50°F±(1.0%+5)Temperature (°F)50°F to 750°F±(2.0%+5)Temperature (°F)750°F to 2300°F±(3.0%+5)True RMSYes—Range SelectAuto / Manual—LoZ AC/DC2000V—VFDACV / ACA—NCV Detection&gt;30V—Live Wire Recognition&gt;80V—Diode TestYes—Continuity Buzzer&lt;50ΩYesData HoldYes—Relative MeasurementYes—MAX/MINYes—Inrush Current TestYes—Peak HoldYes—Over Range IndicationYes—Inbuilt SpotlightYes—LCD BacklightYes—Double-Colored HousingYes—Auto Power OffYes—Low Battery IndicationYes—Unit Icon DisplayYes—Input Impedance10MΩ—Product Size285 × 110 × 45 mm—LCD Size46 × 39 mm—Product Weight610g—Power Supply1.5V (AAA) × 3—Safety CategoryCAT III 1500V / CAT IV 1000V—Standard AccessoriesTest Leads, Hard Carrying Case, Temp. Probe, Manual—Optional AccessoriesMC4 PV Plug, Crocodile Clips, Flex Current Clamp—

HK888E 2000A 2000V AC/DC Solar PV Clamp Meter

HK888E 2000A 2000V AC DC Solar PV Clamp Meter

CM-2018 AC/DC 3 5/6 Digital Clamp Multimeter   Features: 1. Clamp opens 28mm 2. AC DC T-RMS, NCV, LPF（VFC）, LoZ V function 3. Clamp light, Backlight, Flash light 4. Max. 6000 digits large LCD display 5. CE standard design, improves the safety of the test 6. Full function protection, strong anti-interferential performance 7. Duty cycle test, REL test, data hold, Auto power off function  Technical Data: Basic function Range Accuracy DCV 600mV/6V/60V/600V ±(0.5%+5) LoZ 0V~600V ±(2.0%+10) ACV 6V/60V/600V ±(0.8%+5) LPF 0V ~ 600V ±(4.0%+5) LoZ 0V ~ 600V ±(2.0%+10) DCA 60A/600A/800A ±(1.5%+5) ACA 60A/600A/800A ±(1.5%+5) Resistance 600Ω/6KΩ/60KΩ/600KΩ/6MΩ/60MΩ ±(0.8%+1) Capacitance 6nF/60nF/600nF/6uF/60uF/600uF/6MF/60MF ±(2.5%+5) Frequency 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz ±(0.5%+4) Temperature (-40 to 1000 )℃, (-40 to 1832 ) ℉ ±(1.0%+5) Special Function: Model CM-2018 NCV test √ (clamp &amp; red test lead detecting) True RMS test √ LPF (VFC) function √ LoZ function √ Low battery indicator Approx. less than 2.6 V Data hold function √ Auto power off About 15 minutes Diode test √ Continuity test Less than 50Ω Duty-cycle test √ REL test √ Clamp light function √ Backlight display √ Orange backlight display for high volt √ Input impedance 10MΩ Sampling rate 3 times/s AC frequency response 40-2kHz Operation method Auto or manual range Max display 6000 Clamp opens 28mm Battery 3V (2*AAA battery) Power consumption Quiescent current approx. 2mA  General Characteristic： Meter color Orange and Black Meter weight About 200g (including battery) Meter size 185*65*32mm Standard accessory Test leads, battery, manual, temperature probe, carrying bag Standard packing Gift box Carton size 41.5*28*46.5CM Standard QTY per carton 40pcs    G.W per carton 15kg Note: for the NCV detecting function, this clamp meter is not only can detect the NCV by clamp, but also can be directly touched by the red stylus probe to detect cable that could not be reached by the clamp. 

Vici CM-2018 Loz LPF AC DC 800A Clamp Meter with Orange display alarm and Live test function

Vici CM 2018 Loz LPF AC DC 800A Clamp Meter

VC833 3 1/­2 Manual Range Digital Multimeter   Features 1. New type holster, streamlined design, comfortable handle; 2. Large LCD display makes reading clear; 3. Strong antimagnetic and anti-interferential performance; 4. Auto power off when there is no measurement in 15 minutes; 5. Full function protection; 6. Unit symbol display, easy to read; 7. Non-contact voltage detect (NCV) function, data hold; 8. Backlight display.  Technical Data Basic function Range Basic Accuracy DCV 200mV/2V/20V/200V/600V ±(0.5%+4) ACV 200V/600V ±(0.8%+6) DCA 20uA/2mA/200mA/10A ±(1.0%+5) Resistance 200Ω/2kΩ/20kΩ/2MΩ/200MΩ ±(0.8%+1) Special Function Model VC833 NCV √ Data hold √ True RMS √ Function protection √ Backlight display √ Diode test 0V~2V, it displays “OL” if over 2V hFE test 0~2000 Continuity alarm Less than 50Ω, it displays “OL” if over 200Ω Low battery indicator Approx. less than 2.4 V Auto power off About 15 minutes Input impedance 10MΩ Sampling rate 3 times/s AC frequency response 40Hz-2kHz Operation method Manual range Max. display 2000 LCD size 61x28mm Battery 3V (1.5V AAA×2) Power consumption Quiescent current about 2mA General characteristic Meter color Orange and Grey Meter weight 195g（including battery） Meter size 140×72×37mm Standard accessory Test leads, battery, manual Standard packing Gift box Quantity per carton 40pcs GW per carton 12.5kg Carton size 32.5×25×47.5cm  

Vici VC833 Ampere Voltage Resistance Digital Multimeter Tester

Shenzhen Mestek Electronics Co., Ltd.

Digital Clamp Meter T-RMS 10000 DC/AC 200A 6mA Ammeter Multimeter Car Current Voltmeter Capacitance Temp Tester CE Clamp MeterKey attributesIndustry-specific attributesDisplay TypeDigital Only Measuring Current Range0~200A Measuring Voltage Range0~600V Measuring Resistance Range0~10MΩ Measuring Capacitance Range0~6mF Measuring Inductance RangeNO Other attributesPlace of OriginGuangdong, China Brand NameMestek Model NumberCM83D Operating Temperature0℃~40℃ Dimensions220*110*55mm Weight420g ColorBlack+Blue Product nameClamp Multimeter NameClamp Meter Manual Display10000 Counts Power supply2x1.5V AAA Batteries(not included) Safety LevelIEC61010-1, CAT III 600V FrequencyTest Frequency with AC Current Range Data holdYes BacklightYes NCVHave Shenzhen Mestek Electronics Co.,LTD,business mogel for testing instruments for more than 15 years.Our engineers have been in this industry for over 15 years and served some of the most famous customers from all over the world.We can provide below services for all our partners in this challenging world.1.Fast delivery,1~5 days delivery time for Mestek Products.2.Small MOQ requirementsfor all our items, 1PCS is also acceptable.3.Exclusive Partnership in different regions4.OEM&amp;ODM Design services for brightideals.5.Free samples avaiable for partners.All our items are coming with CE certification and we have special team work for after sales services 7*24 to help you solve any kind of problem.We are ready for sign contract with you in case you need it, as honest dealer, we never crook our customers.Come and let us make a difference together !ModelCM83DCounts10000 countsDC voltage0~600VAC voltage0~600VDC current0~200AAC current0~200ADiode,True-RMS,Date hold,Backlight,Flashlight,Backlight,Auto power off,NCV detectSupportResistance0~10MΩCapacitance0~6mFRCD leakage testingHavePackaging and deliverySelling Units:Single item Single package size:22X11X5.5 cm Single gross weight:0.500 kg

CM83D AC/DC Clamp Meter

CM83D AC DC Clamp Meter with digital display and multiple functions

 	 Manual range 	 DC / AC voltage 	 AC current 	 Resistance 	 Diode test 	 Audible Continuity Test 	 Data Hold 	 Insulation test (with 261 option) 	 Low battery indication 	 Overload Protection  

我的採購

確定要取消關注此供應商？

確定要取消關注此供應商？