廣州瑞晶賢力信息科技有限公司

CorrigoArdo是通⻛控制控制器，使从安装到操作和维护的每⼀步都⽐以往更容易。只需连接控制器，输⼊所需的任何设置并启动。它既可以单独使⽤，也可以集成到⽹络中。它内置了对许多不同语⾔的⽀持，设计⽤于安装在din导轨或柜⻔上。它可以连接到CLOUDigo CorrigoArdo -可配置24 V通⻛控制器，以便从任何位置监视系统。 Technical data Supply voltage : 24 V AC (21…27 V AC 50...60 Hz) / 20...36 V DC Protection class : IP20 Storage temperature : -20…+70 °C Mounting : DIN-rail Number of modules : 8,5 Display type : Backlit (LCD), 4 rows of 20 characters Confi guration : PT1000/Ni1000/Ni1000LG/0-10 V Operating system : EXOrealC Clock : Real-time clock Memory backup :Backup of memory and real-time clock function Battery backup : CR2032 replacable Lithium cell Battery life : Min. 5 years Dimensions, external (WxHxD) : 149 x 121 x 60 mm Serial port data Port type : RS485 Default protocol : EXOline Supported protocols : Modbus / EXOline / BACnet MS/TP Port isolation : Galvanic common mode voltage. Max. 150 V Communication speed: 9600 baud (1200...76800 baud) Parity : Odd/Even/None Stop bits ; 1 or 2 TCP/IP port data Port type : Ethernet Default protocol : EXOline-TCP/IP Supported protocols : EXOline-TCP/IP / Modbus-TCP / BACnet/IP Material Material, housing, base : Polycarbonate (PC)  

REGIN CorrigoArdo – 可配置通風控制器 VCA152W-4 VCA152DW-4 VCA282W-4 VCA282DW-4

REGIN CorrigoArdo configurable ventilation controller

REGIN ExigoVido are controllers for heating and boiler control that make every step from installation to operation and maintenance easier than ever. Simply connect the controller, enter any settings as desired and start up. It can be used either stand-alone or integrated into a network. It has builtin support for many different languages and is designed for mounting on a DIN-rail, in a cabinet door or directly on a wall.  

REGIN HCV191DW-2 HCV192DW-2 HCV203DWM-2 ExigoVido – Configurable 230 V heating controller

REGIN HCV191DW 2 heating controller for easy installation and operation

Midi区房间控制器 Midi区是带有内置温度传感器和RS485通信端⼝的控制器。某些型号可配备CO2传感器。不同房间和区域的控制器可以连接到总线，通过RS485 (EXOline, BACnet或Modbus)与中央SCADA系统通信。 RC-CD*和RC-C3D*是BTL上市的。 应用 tool© 房间控制器可以配置，以满⾜您的需要与Regin的软件应⽤⼯具©，可从www.regincontrols.com下载。 Technical data Supply voltage : 24 V AC (18...30 V AC) Power consumption : &lt; 3 VA Ambient temperature : 0...50 °C Storage temperature : -20…+70 °C Ambient humidity : Max. 90 % RH (non-condensing) Communication : RS485 (EXOline or Modbus with automatic detection/change-over, or BACnet).Note: BACnet communication is only an option for models with display. Modbus : 8 bits, 1 or 2 stop bits. Odd, even (FS) or no parity. Communication speed : 9600, 19200, 38400 bps (EXOline, Modbus and BACnet) or 76800 bps (BACnet only) Built-in temperature sensor : 0...50°C NTC linearised 15 kΩ Accuracy :±0.5°C at 15...30°C Measuring range, temperature 0…50 °C Built-in CO2 sensor : 0…5000 ppm Mounting : Room Dimensions (WxHxD)：95 x 95 x 28 (RC-…), 95 x 95 x 38 (RCC-…) mm Protection class ： IP20 Inputs Analogue inputs (AI) ： PT1000, 0...50°C, 0...10 V Condensation input (CI) ：Digital input for condensation detector Digital inputs (DI) ： Closing potential-free contact Universal inputs (UI) ： Analogue input (AI), PT1000 sensor, 0...100°C or digital input (DI) Outputs Digital outputs (DO) ：24 V AC, max. 0.5 A Universal outputs (UO) ：Digital output (DO) 24 V AC, max. 2.0 A or analogue output (AO), 0...10 V DC, max. 5 mA +C power output for DI only ：24 V DC, max. 10 mA, short circuit-protected   

REGIN Regio Midi 房間控制器 RC-C3 RC-CF RC-CT RC-CTH RC-CTO

REGIN Regio Midi room controllers with built-in sensors

房间控制器，温度和CO2 温度和CO2 控制器，⽤于控制空⽓处理或需求控制通⻛应⽤中的EC⻛扇或阻尼器。 技术参数 供电电压：85…230 V AC, 50/60 Hz 温度范围：5…30 °C 工作范围，二氧化碳：0…2000 ppm 输出 ：1 analogue output 0...10 V (RL &gt; 10 K) 安装方式：房間 防护等级：IP30 

REGIN ALC230A 房间控制器，温度和CO AL230A 室温控制器 2

REGIN ALC230A Room controller, temperature and CO2

ExigoArdo 是⽤于加热和锅炉控制的控制器，使从安装到操作和维护的每⼀步都⽐以往更容易。只需连接控制器，输⼊所需的任何设置并启动。它既可以单独使⽤，也可以集成到⽹络中。它内置了对许多不同语⾔的⽀持，并设计⽤于安装在din导轨或在柜⼦⻔上。 Technical data Supply voltage : 24 V AC (21…27 V AC 50...60 Hz) / 20...36 V DC Protection class : IP20 Storage temperature : -20…+70 °C Mounting : DIN-rail Number of modules : 8,5 Display type : Backlit (LCD), 4 rows of 20 characters Configuration : PT1000/Ni1000/Ni1000LG/0-10 V Operating system : EXOrealC Clock : Real-time clock Memory backup : Backup of memory and real-time clock function Battery backup : CR2032 replacable Lithium cell Battery life : Min. 5 years Dimensions, external (WxHxD): 149 x 121 x 60 mm Serial port data Port type : RS485 Default protocol : EXOline Supported protocols : Modbus / EXOline / BACnet MS/TP Port isolation :Galvanic common mode voltage. Max. 150 V Communication speed : 9600 baud (1200...76800 baud) Parity : Odd/Even/None Stop bits : 1 or 2 TCP/IP port data Port type : Ethernet Default protocol : EXOline-TCP/IP Supported protocols : EXOline-TCP/IP / Modbus-TCP / BACnet/IP Material Material, housing, base : Polycarbonate (PC) 

REGIN ExigoArdo – -可配置24v加熱控制器 HCA152W-4 HCA152DW-4 HCA282DW-4 HCA283DWM-4 HCA283WM-4

REGIN ExigoArdo Configurable heating controller for efficient operation

房间控制器，温度 温度控制器，⽤于控制空⽓处理或需求控制通⻛应⽤中的EC⻛扇或阻尼器。 技术参数 供电电压：85…230 V AC, 50/60 Hz 工作范围、温度 ：5…30 °C 输出：1 模拟输出 0...10 V (RL &gt; 10 K) 安装方式 ：房間 防护等级 ：IP30 

REGIN AL230A 室溫控制器

电⼦⻛扇盘管恒温器⽤于室温控制。加热和冷却之间的⾃动或⼿动切换。恒温器具有3速⻛扇控制功能(⽤于⻛扇盘管)，内置温度传感器，背光显⽰，以及窗⼝触点或占⽤检测器的输⼊ RCF-230CD*被列⼊BTL。   

REGIN RCF-230D RCF-230CD 带开/关输出的⻛扇盘管恒温器

REGIN RCF 230TD Fan coil controller for thermal or actuators

EXOcompactEedo 是一个 230V 交流电自由编程控制器。该控制器提供内置的通信功能，通过 EXOline、Modbus 或 BACnet 与 Arrigo BMS 或其他SCADA 系统集成。它可以作为独立的单元使用，也可以作为更大系统的一部分。该控制器非常适合作为房间控制器，并与 Regin 的 ED-RU-… 系列房间单元无缝连接。 技术参数 供电电压 :230 V ~ (207…253 V ~ 50/60 Hz) 功率消耗:11 VA 无加载，无显示 防护等级 :IP20 环境湿度 :Max. 95 % RH 环境温度 :0…50 °C 储存温度 :-20…+70 °C 操作系统 :EXOrealC 电池备份 :内存和实时时钟，至少5年 安装方式 :导轨 模块数量 :8.5 显示 :外部(附件) 外部尺寸(WxHxD) :149 x 121 x 58 mm 重量(含包装) :0.37 kg 通讯端口 Ethernet :EXOline-TCP/IP, Modbus-TCP, BACnet/IP RS485 :EXOline, EFX, Modbus-RTU, M-Bus (through X1176) I/O 数据 模拟输入 (AIb) ：0…10 V DC 模拟输入 (AIc) ：PT1000 数字输入 (DIb) ：来源输入类型，GND为参考 冷凝输入(CIa)：Regin冷凝检测器专用输入KG-A/1 模拟输出(AOa)：0…10 V DC, max. 5 mA, 短路保护 数字输出 (DOc)：继电器输出230V AC，最大3A 数字输出_d (DOd)：可控硅输出230 V AC，最大300ma 数字输出，最大总电流(保险丝)6.3 A (6.3 AT 5 x 20 mm) 功率输出 (POa)：24 V DC, max. 50 mA 材质 外壳材料：聚碳酸酯, PC Ethernet ports：1 RS485 ports：2 显 示:- AI ：3 DI ：3 CI ：1 AO：4 DO：5 Inputs/Outputs：16 配件 ED-T70W：外部触摸屏显示控制器与web界面 ED-T70W-2：外部手持触摸显示控制器与web界面 ED-T7：外接触摸屏显示器 E3-DSP：外接显示器 EDSP-K3：3m外部显示器连接线 EDSP-K10：10m外部显示器连接线 EDSP-SPLIT：用于将两个显示单元连接到一个控制器的电缆分离器 E-CABLE2-USB： USB连接线 FMK2：前安装套件，12个模块 FMCE：前安装套件，可容纳一个控制器 TP-AE：Ardo和Eedo控制器的终端保护套件 PLTCE：一组有角度的插入端子块 BATTERY-4289：替换电池(CR2032) 

REGIN 可自由编程控制器 EXOcompactEedo XCE163W-1

REGIN XCE163W 1 freely programmable controller for building automation

REGIN 房间湿度调节器，1步或2布 带有⽑元件的机电房间加湿器，⽤于控制暖通空调系统中的加湿和/或除湿。设定值旋钮可锁定。可⽤于控制加湿器或除湿器或控制⻛扇的开/关。也可⽤于在湿度超过或低于预设⽔平时发出警报。  

REGIN HR1 房間濕度調節器 HR2 HR1-DH

REGIN HR1 Room humidistat for HVAC humidity control

室温控制器为0…10V DC或三点执⾏器 这种室内控制器主要⽤于控制区域控制系统中的加热或冷却。它有⼀个存在探测器(占⽤控制)的输⼊。控制器也有⼀个转换输⼊，这使得控制功能可以在加热和冷却之间切换。 技术参数 供电电压 ：24 V AC, ±15 % 50...60 Hz, 2 VA 输出 ：0...10 V DC, 1 mA or 3-point, 24 V AC, 1 A 输入 ：两个数字和一个NTC传感器 设定值 ：0...40 °C 比例带 ： 0.5...50 K 防护等级 ：IP20 

REGIN AL24A1T 室温控制器为 0...10 V DC 或 三点执行器

REGIN AL24A1T Room temperature controller for heating and cooling

Smoke detector for duct mounting, optical Single-tube detector, including 600 mm Venturi tube. Technical data Supply voltage:9...33 V DC (via ABV control unit).24 V AC ±15 % for RAC(M) models. Power consumption, incl. end resistor (not RAC(M)): Normal operation: 10 mA at 24 V DC. Alarm condition: 50 mA at 24 V DC. Service alarm condition: 20 mA at 24 V DC. Mounting:Duct Protection class:IP54 Article: SDD-OE65:Optical detector with service alarm (max 20 sensors, to be connected to ABV control unit) including 600 mm Venturi tube. SDD-OE65-RAC:Optical detector with AC power supply and relay output only, with service alarm,including 600 mm Venturi tube. 

REGIN SDD-OE65-RAC SDD-OE65 Smoke detector for duct mounting, optical

REGIN SDD OE65 Smoke detector for duct mounting, optical

Electric heating controllers intended for control of radiators or electric heating coils. They can be mounted on a DIN-rail in a cabinet. The electric heating controllers pulse the whole load on/off and utilise time-proportional triac control. Automatic control function adaptation, P- or PI-control. Technical data Supply voltage：230...400 V (210 - 415 V ~ 50/60 Hz 16 A) Pulse period：60 s Mounting：DIN-rail Power dissipation：20 W of heat at full load Protection class：IP20 P-band：20 K (rapid temperature changes), 2 K (slow temperature changes) I-time：6 min (rapid temperature changes) Ambient temperature：0…40 °C Ambient humidity：Max. 90 % RH, non-condensing Storage temperature：-40...+50 °C Dimensions (WxHxD)：115 x 88 x 59 mm Number of modules：6.6 Inputs/outputs (I/O) Output load：Resistive load, max 16 A, min 1 A Sensor inputs：One input for main sensor Sensor element：NTC Regin standard Setpoint range：0...30 °C (the external sensor determines the temperature range) Setpoint alternatives：Either internal setpoint potentiometer or external setting device. Night setback：5 K Indication：Red LED that is lit when power is pulsed to the heater 

REGIN PULSER/D – electric heating controller with PI-control, 230...400 V AC, DIN-rail mounting

REGIN PULSER D electric heating controller with PI control

The controller can be used with internal or external setpoint. Automatic control function adaptation, P- or PI-control. The controller can also be set to be controlled by an external 0...10 V DC signal. Technical data Supply voltage ：3-phase, 210...255 / 380...415 V AC, automatic adaptation Setpoint ：0…30 °C (the sensor determines the range) Max. load ：Max. 25 A, min. 3 A/phase Sensor inputs ：Two, main and min./max. limiting sensors (NTC sensor) Control signal ：0...10 V DC (external signal) Mounting ：Wall Protection class ：IP30 P-band ：Supply air temperature control: 20 K, fixed.Room temperature control: 1.5 K, fixed I-time (supply air temperature control) :6 min, fixed Pulse period :6...120 s 

REGIN TTC2000 – electric heating controller for wall mounting, 3-phase, 210...415 V

REGIN TTC2000 electric heating controller for wall mounting

⽤于空⽓和⾮腐蚀性⽓体的差压变送器。⽤于阻尼器、变频器、VAV系统等的控制。 Technical data Supply voltage : 24 V AC/DC (21...27 V AC/DC 50-60 Hz) Output signal, pressure : 0…10 V DC / 4…20 mA Output signal, controller : 0...10 V DC Measuring range, pressure : 0...100 / 0...300 / 0...500 / 0...999 Pa Accuracy, pressure: ±1 % full scale at 20 °C P-band: 0...300 % I-time : 0…999 s D-factor : 0...999 Electronic damping ; 0...20 s Display type : LED, three digits Mounting : Wall Protection class : IP54 

REGIN DMD-C 差壓變送器帶內置控制器與LED顯示

REGIN DMD C Differential pressure transmitter with LED display

湿度和温度变送器⽤于Modbus通信，房间安装 技术参数 供电电压 ：24 V AC ±10 % / 15…35 V DC 输出：Modbus 功耗 ：&lt; 1 W 变压器功率 ：≥ 2 VA 工作范围，温度 ：0…50 °C 温度精度 ：±0.2°C at 20°C 工作范围，湿度 ：0…100 % RH 湿度精度 ：±2 % RH at 20°C 通讯 ：Modbus RTU 安装方式 ：室内 尺寸：100 x 85 x 30.5 mm 防护等级：IP30 产品描述：RH + °C 

REGIN HTRC10 HTRC10-D 用于MODBUS通信的湿度和温度变送器，室内安装

REGIN HTRC10 humidity and temperature transmitter for Modbus

电⼦⻛扇盘管恒温器⽤于室温控制。加热和冷却之间的⾃动或⼿动切换。恒温器具有3速⻛扇控制功能(⽤于⻛扇盘管)，内置温度传感器，背光显⽰，以及窗⼝触点或占⽤检测器的输⼊ RCF-230CD*被列⼊BTL。    

REGIN RCF 230D Fan coil thermostat with on off outputs

带有合成元件的机电除湿器。设定点旋钮可锁定。 Technical data Output : One, 230 V AC, 5 A, change-over Setpoint : 35…95 % RH Hysteresis : 7 % RH Mounting : Room Protection class : IP30 

REGIN HR-S 房間濕度器

Wall mounted electric heating controller intended for control of radiators or electric heating coils. It is a complete controller with built-in sensor and setpoint adjustment. It pulses the whole load on/off and utilises time-proportional triac control. Both automatic control function adaptation, P- or PI-control and supply voltage adaptation, 230 V / 400 V. Technical data Supply voltage:230...400 (210 - 415 V ~ 50/60 Hz 16 A) Pulse period:60 s Mounting:Wall Power dissipation :20 W of heat at full load Protection class:IP20 P-band:20 K (rapid temperature changes), 1.5 K (slow temperature changes) I-time:6 min (rapid temperature changes) Ambient temperature :0...30 °C Ambient humidity: Max. 90 % RH, non-condensing Storage temperature :-40...+50 °C Dimensions:95 x 153 x 41 mm Cable connection :Cage clamp Inputs/outputs (I/Os) Output load:Resistive load, max 16 A, min 1 A Sensor inputs :External main sensor and external sensor for temperature limitation Sensor element:NTC Regin standard Setpoint range:0...30 °C (the external sensor determines the temperature range) Setpoint alternatives :Either internal setpoint potentiometer or external setting device Night setback:0...10 K Indication:Red LED that is lit when power is pulsed to the heater Article PULSER-M :Electric heating controller with min./max. limitation PULSER-ADD :Add-on unit 

REGIN PULSER-M PULSER-ADD – 1- OR 2-PHASE Electric heating controller with PI-control, 230...400 V AC, wall mounting

REGIN PULSER M electric heating controller with PI control

带有触摸显⽰和通信的⻛扇线圈恒温器，230 V AC开/关输出 超薄电⼦⻛扇线圈恒温器⽤于室温控制。加热和冷却之间的⾃动或⼿动切换。恒温器具有3速⻛扇控制功能(适⽤于⻛扇盘管)，内置温度传感器，背光触摸显⽰器，以及酒店钥匙卡或占⽤探测器的输⼊。 技术参数 供电电压：230 V ~ (207…253 V ~ 50/60 Hz) 功耗 ：&lt; 3 VA 防护等级：IP30 环境湿度：10…90 % RH (non-condensing) 环境温度：0…50 °C 测量范围、温度：0…50 °C 温度传感器元件：NTC 精度、温度：±0.5 K 输出信号、温度：NTC 显示：Built-in 显示类型：LED-backlit LCD 设定值调整：5…35 °C 安装：房间(fush安装，螺钉距离：cc 60mm) 安装方式：风扇盘管，2管或4管 外型尺寸(WxHxD)：95 x 95 x 50.5 mm DI：1 DO: 5 AI: 1 

REGIN RCFD-230C 带有触摸显⽰和通信的⻛扇线圈恒温器，230 V AC开/关输出

REGIN RCFD 230C Fan coil thermostat with touch display

Electric heating controllers intended for control of radiators or electric heating coils. They can be mounted on a DIN-rail in a cabinet. The electric heating controllers utilise time-proportional triac control and operate on an external 0...10 V input signal. Technical data Supply voltage：230 V ~ (207...253 V ~ 50/60 Hz 16 A) or 400 V ~ (360...440 V ~ 50/60 Hz), automatic adaption to supplied voltage Pulse period：6/60/120 s, adjustable Mounting：DIN-rail Power dissipation：20 W of heat at full load Protection class：IP20 Ambient temperature：0...40 °C °C Ambient humidity：Max. 90 % RH, non-condensing Storage temperature：-40...+50 °C Dimensions (WxHxD)：115 x 88 x 59 mm Number of modules：6.6 Inputs/outputs (I/O) Input signal：0...10 V DC Output load：Resistive load, max 16 A, min 1 A Description：Electric heating controller for external 0...10 V DC control signal 

REGIN PULSER-X/D – Electric heating controller for external signal 0-10 V, 230/400 V AC,  DIN-rail mounting

REGIN PULSER X D electric heating controller for external signal

With demand-based control you can reach optimal comfort while minimizing energy consumption in sustainable buildings of the future. The Regio RCX room controller has a very flexible application for the installer that can configure almost every possible room application, without programming knowledge. It’s also installation-friendly with detachable bottom plate with terminals. Terminals are detachable to simplify measurement for maintenance. Controllers in different rooms and zones can be connected to a field bus enabling communication with a central SCADA system, via RS485 (BACnet, Modbus or EXOline).Regio RCX room controller also seamlessly integrates with our building management system Arrigo, our EXO-system range, as well as different sensors for a comprehensive solution. The stand-alone Regio controllers can easily be configured for a specific application via the Regin:GO app or Application Tool 

Regin RCX-THCVP-D Regio RCX 智能房間控制器

小型紧凑的控制器，具有不同种类的通信方式，可配备或不配备内置显示屏。EXOcompact 配备了多种通信端口，因此它可以作为独立的单元运行，或者与 Arrigo BMS 或其他 SCADA 系统集成。提供了用户友好的工具，便于灵活操作，并通过 Web 服务器轻松访问。   

REGIN 可自由编程控制器 XCA152DW-4  XCA152W-4 XCA153W-4 XCA203W-4 XCA282W-4

REGIN EXOcompact Ardo freely programmable controllers

技术参数：最大 28 V DC, Min. 11+(0.02xRL) V DC 输出信号 ：4…20 mA (2 wire) 功耗 ：1.2 W 直流电 ：Min. 2 W 温度范围 ：0…50 °C 精度、温度 ：±0.5°C at 20°C 安装方式：室内 外型尺寸(WxHxD mm) ：100 x 85 x 30.5 防护等级 ：IP30 

REGIN HTRT10A-420 HTRT10AD-420 ⽤于室内安装的湿度和温度变送器, 4…20 mA

REGIN HTRT10A 420 humidity and temperature transmitter

⼀系列紧凑、经济、多功能的独⽴控制器，⽆需通信。它们是预先配置的，适⽤于较⼩的应⽤。控制器易于安装，调试和控制。 Technical data Supply voltage : 24 V AC ±15 % / ...10-230 model: 230 V AC Power consumption : 4 VA Ambient temperature : 0…50 °C Storage temperature : -40…+50 °C Ambient humidity : Max. 90 % RH Mounting : DIN-rail Number of modules : 7 Protection class : IP20 Display : Backlit LCD, numeric/graphic, language-independent symbols Dimensions (WxHxD) : 123 x 123 x 60 mm Clock : Week-based 24-hour clock (models with 10 I/Os only) Inputs Analogue inputs (AI)：PT1000 Digital inputs (DI) ： Closing potential-free contact Universal inputs (UI) ： 0...10 V DC or digital Setpoint input (SPI) ： For an external PT1000 setpoint device, e.g. TG-R4/PT1000 or TBI-PT1000 Outputs Analogue outputs (AO) ： 0...10 V DC, short-circuit protected Digital outputs (DO) ： OP10 and OP10-230 only. Triac 24 V AC, 0.5 A (3-point control or alarm output) and one change-over relay 230 V AC, 5 A (fan start) 

我的採購

確定要取消關注此供應商？

確定要取消關注此供應商？