汽車運輸

搜羅全球頂尖汽車運輸公司提供的汽車運輸資訊。您可在貿發網採購平台即時諮詢可靠和專業的產品供應商，以獲取詳盡的資料及報價。

汽車運輸供應商和製造商

Automobile & Transport

汽車電子

搜羅全球頂尖汽車電子公司提供的汽車電子資訊。您可在貿發網採購平台即時諮詢可靠和專業的產品供應商，以獲取詳盡的資料及報價。

汽車電子供應商和製造商

Automobile Electronics

汽車擴音器

automobile

搜羅全球頂尖汽車擴音器公司提供的汽車擴音器資訊。您可在貿發網採購平台即時諮詢可靠和專業的產品供應商，以獲取詳盡的資料及報價。

汽車擴音器供應商和製造商

Car Amplifiers

景德鎮金誠電子實業有限公司

   Pick up the highs and lows for faithful sound reproduction.   Conduct power evenly to keep the speaker at an appropriate level.   Give your car stereo system a power boost.   Enable simple installation.   Available in 4-channel (60W or 80W) or 1-channel (350W or 600W).  

Car Amplifier

Shenzhen Music Way Technology Co.,Ltd.

M4 4-Channel Class D Amplifier with 6-Channel DSP · 340 Watts RMS  Features • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP(ADAU1452) • 32bit, 295MIPS DSP technology, controllable via new V3 PC software or Tunest App • Signal-to-noise Ratio ≥90dB • Frequency Response 15 Hz – 22 kHz (-3dB) • THD ≤0,1% (1 kHz, 4Ω, 90% Power) • Controllable AUX input sensitivity, Clipping LEDs • Plug+Play with vehicle-specific cable sets  Specification Power output(RMS) @ 14.4 VDC, 1% THD: 4CH @ 4 Ω：45 W x 4 4CH @ 2 Ω：65 W x4 2CH - (bridged 1/2; 3/4) @ 4 Ω: 145 W x 2 4 x High Level Input,10V RMS 2 x AUX/RCA Input, 0.3-2.6V RMS 4 x Loudspeaker Output amplified 6 x Pre-Amplifier Output/RCA (configurable via DSP) Dimensions: 165 x 41 x 150 mm 

DSP Amplifier

D1S with plug play cables enhances the sound of factory sound system, just doesn't get any easier than this.  Features • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP(ADAU1701),,controllable via PC software • Signal-to-noise Ratio ≥90dB • Frequency Response 15 Hz – 22 kHz (-3dB) • THD ≤0,02% (1 kHz, 4Ω, 90% Power) • Plug+Play with vehicle-specific cable sets  Specification Power output(RMS) @ 14.4 VDC, 1% THD: 4CH @ 4 Ω：25 W x 4 4 x High Level Input 2 x AUX/RCA Input 4 x Loudspeaker Output amplified 6 x Pre-Amplifier Output/RCA (configurable via DSP) Dimensions: 165 x 98 x 32 mm 

FOUR100 4-Channel Class D Amplifier·800 Watts RMS  Features • Class D Technology with very high efficiency • Selected and audiophile tuned components • Interference-free technology (ITF), high EMC • Intelligent High Level Input with Error Protection System • Auto Turn-On, Start Stop ready • Compact brushed aluminum heatsink • Compact Bass Level Remote Controller  Specification Power output(RMS) @ 14.4 VDC, 1% THD: 4x130 W /220W@ 4 Ω/2 Ω or 2x435W @ 4 Ω bridged Highpass Filter 50 - 5000 Hz (CH1/2) Highpass Filter 10 - 500 Hz (CH3/4) Lowpass Filter 50 - 5000 Hz (CH3/4) Bass Boost 0 - 12 dB (CH3/4) Bandpass Function (CH3/4) CH3/4 &gt; CH1/2 Copy Function Input Mode Switch CH2/CH4 RCA Inputs, RCA Outputs High Level Inputs with EPS Auto Turn On Function Bass Remote Controller Dimensions: 150 x 45 x 220 mm  

The new M4+v3 DSP amplifier can be considered as the little brother of the M6 model. The only difference: The M4+ is coming with four amplified speakers, but still offering more power per channel than the larger M6. The newly engineered Class D technology is particularly immune to EMC interference, which is virtually indispensable in today‘s electronic-packed vehicles.  A key-premise to enjoy interference-free music while driving. With four bridged power outputs, each one providing 135 watts RMS per channel (2 Ω), the M4+v3 offers remarkable output power with a total of 540 watts RMS. M4 + is perfect for tuning original 4-channel sound systems. Four additional DSP-tunable preamp outputs allow the integration of further amplifiers.  Features • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP (ADAU1452) • 32bit, 295 MHz DSP technology, controllable via new V3 PC software or Tunest App • Soft-Clipping (power attenuation) in 2 Ohm operation • Signal-to-noise Ratio ≥90dB • Frequency Response 15 Hz – 22 kHz (-3dB) • THD ≤0,1% (1 kHz, 4Ω, 90% Power) • Separately controllable input sensitivity (Channel 1-6, AUX), Clipping LEDs • Plug+Play with vehicle-specific cable sets • External Bluetooth® USB-Dongles BTS, BTS-HD &amp; BTA2 for Audio Streaming &amp; App Control (optional) • Digital remote control DRC1 with OLED display for controlling various DSP functions (optional)  Specification Power output(RMS) @ 13.8 VDC, 1% THD: 4 x 100/135 Watts RMS @ 4/2 Ω or 2 x 270 Watts RMS @ 4 Ω bridged 6 x High Level Input 6 x RCA Low Level Input* 2 x AUX/RCA Input, 1 x Optical Input/Stereo 4 x Loudspeaker Output amplified 4 x Pre-Amplifier Output/RCA (configurable via DSP) Dimensions: 220 x 44 x 150 mm * only with optional MPK-RCA6/MPK-RCA6-PP cable 

TWO1002-CHANNEL CLASS D AMPLIFIER·370 WATTS RMThe elegantly designed amps convey their qualities as soon as they are touched: No rattling sheet metal, heat sinks and end panels made of brushed aluminum and a flush MUSWAY logo on top. The amplifiers have everything on board that a modern sound system needs: EPS, auto turn-on, high and low level inputs and much more. The ingeniously switchable crossovers in the multi-channel amplifiers offer every imaginable configuration - whether fully active, semi active or passive operation, everything is possible.                

  6x9" car speaker with high quality fine sound.  3 ways speaker, electroplate injection cone, 25oz magnet.  Max power, 1200W.  Easy to clean and use.  

Car Speaker And Amplifier

  A metallic car amplifier that produces high quality sounds.  4 channel masfet and is heat resistant.  Great for use in any vehicle.  

Musway Mono Class D Car Audio Amplifier ONE600:      

M12 12-Channel Class D Amplifier with 16-Channel DSP · 1440 Watts RMS  Features • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP (ADAU1466) • 32bit, 295 MHz DSP technology, controllable via new V3 PC software or Tunest App • Signal-to-noise Ratio ≥95dB • Frequency Response 15 Hz – 22 kHz (-3dB) • THD ≤0,05% (1 kHz, 4Ω, 90% Power) • Separately controllable input sensitivity (Channel 1-6, Channel 7-12, AUX), Clipping LEDs • External Bluetooth® USB-Dongles BTS, BTS-HD &amp; BTA2 for Audio Streaming &amp; App Control (optional) • Digital remote control DRC1 with OLED display for controlling various DSP functions (optional)  Specification Power output(RMS) @ 14.4 VDC, 1% THD: @ 4/2 Ohms 85/120 Watts RMS per channel* @ 4 Ohms bridged 240 Watts RMS per channel pair* 12 x High Level Input 8 – 24 V RMS with EPS 6 x RCA Low Level Input (RCA) 2 – 6 V RMS 1 x RCA AUX Input/Stereo 2 – 8 V RMS 1 x Optical Input/Stereo (PCM, 192 kHz / 24 bit) 4 x RCA Pre-Amplifier Output (configurable via DSP) 12 x Loudspeaker Output amplified Dimensions: 340 x 48 x 171,5 mm * depending on the application 

Features Start-Stop ready, Auto Turn-On EPS (Error Protection System) Interference Free Technology, EMC proved PURE IN&gt;OUT Function High and Low Level Inputs Brushed aluminum heat sink and end panels Compact Bass Level Remote Controller  Specification Power output(RMS) @ 14.4 VDC, 1% THD: 1x925/1500/2040@ 4 Ω/2 Ω/1 Ω Subsonic-Filter 10 - 40 Hz, Lowpass Filter 40 - 150 Hz Bass Boost 0 - 18 dB@ 45Hz, Phase 0 - 180° Filter Bypass Function (Pure Amplification) Quick Connect Speaker Output Dimensions: 320 x 50 x 160 mm 

EIGHT100 8-Channel Class D Amplifier·1440 Watts RMS  Features • Class D Technology with very high efficiency • Selected and audiophile tuned components • Interference-free technology (ITF), high EMC • Intelligent High Level Input with Error Protection System • Auto Turn-On, Start Stop ready • Compact brushed aluminum heatsink • Compact Bass Level Remote Controller  Specification Power output(RMS) @ 14.4 VDC, 1% THD: 8x110 W /195W@ 4 Ω/2 Ω or 4x390 W @ 4 Ω bridged Highpass Filter 50 - 5000 Hz (CH1/2 &amp; CH5/6) Highpass Filter 10 - 500 Hz (CH3/4 &amp; CH7/8) Lowpass Filter 50 - 5000 Hz (CH3/4 &amp; CH7/8) Bandpass Function (CH3/4 &amp; CH7/8) Input Selector Dimensions: 150 x 45 x 320 mm 

M6 6-Channel Class D Amplifier with 8-Channel DSP · 630 Watts RMS  Features • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP (ADAU1452) • 32bit, 295 MHz DSP technology, controllable via new V3 PC software or Tunest App • Soft-Clipping (power attenuation) in 2 Ohm operation • Signal-to-noise Ratio ≥90dB • Frequency Response 15 Hz – 22 kHz (-3dB) • THD ≤0,1% (1 kHz, 4Ω, 90% Power) • Separately controllable input sensitivity (Channel 1-4, Channel 5-6), Clipping LEDs • Plug+Play with vehicle-specific cable sets • External Bluetooth® USB-Dongles BTS, BTS-HD &amp; BTA2 for Audio Streaming &amp; App Control (optional) • Digital remote control DRC1 with OLED display for controlling various DSP functions (optional)  Specification Power output(RMS) @ 13.8 VDC, 1% THD: 6 x 70/105 Watts RMS @ 4/2 Ohms or 3 x 210 Watts RMS @ 4 Ohms bridged 6 x High Level Input 8 – 20 V RMS 6 x RCA Low Level Input* (RCA) 2 – 6 V RMS 1 x AUX Input/Stereo (RCA) 2 – 6 V RMS 1 x Optical Input/Stereo (PCM, 96 kHz / 24 bit) 6 x Loudspeaker Output amplified 2 x Pre-Amplifier Output (RCA) 4 V RMS (configurable via DSP) Dimensions: 150 x 44 x 220 mm * only with optional MPK-RCA6/MPK-RCA6-PP cable set 

P2 2-Channel Class D Amplifier ·210 Watts RMS  Specification Power output(RMS) @ 14.4 VDC, 1% THD: 2 x 80/100 Watts RMS @ 4/2 Ω 1 x 210 Watts RMS @ 4 Ω bridged 2 x RCA Input/Stereo Detachable Speaker and Power Connectors Dimensions: 124 x 36 x 75 mm 

Features • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP (ADAU1452) • 32bit, 295MIPS MHz DSP DSP technology, controllable via new V3 PC software or Tunest App • Separately adjustable input sensitivity (CH1-4, CH5-6, AUX) • High quality full aluminum housing • External Bluetooth® USB-Dongles BTS, BTS-HD &amp; BTA2 for Audio Streaming &amp; App Control (optional) • Digital remote control DRC1 with OLED display for controlling various DSP functions (optional)  Specification 6 x High Level Input 3 – 21 V RMS 6 x Low Level Input (RCA) 1 – 5 V RMS 1 x AUX Input/Stereo (RCA) 1 – 5 V RMS 1 x Optical Input/Stereo (PCM, 96 kHz / 24 bit) 8 x RCA Output 6,5 V RMS Dimensions: 181 x 41 x 124 mm 

DSP Processors

SIX100 6-Channel Class D Amplifier·1080 Watts RMS  Features • Class D Technology with very high efficiency • Selected and audiophile tuned components • Interference-free technology (ITF), high EMC • Intelligent High Level Input with Error Protection System • Auto Turn-On, Start Stop ready • Compact brushed aluminum heatsink • Compact Bass Level Remote Controller  Specification Power output(RMS) @ 14.4 VDC, 1% THD: 6x120 W /200W@ 4 Ω/2 Ω or 3x395 W @ 4 Ω bridged Highpass Filter 50 - 5000 Hz (CH1/2) Highpass Filter 10 - 500 Hz (CH3/4 &amp; CH5/6) Lowpass Filter 50 - 5000 Hz (CH3/4 &amp; CH5/6) Bandpass Function (CH3/4 &amp; CH5/6) Bass Boost 0 - 12 dB (CH5/6) Input Selector CH2/CH4/CH6 Dimensions: 150 x 45 x 290 mm  

D8 8-Channel Class D Amplifier with 10-Channel DSP · 600 Watts RMS  Features • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP (ADAU1452) • 32bit, 295 MHz DSP technology, controllable via PC software or Tunest App • Signal-to-noise Ratio ≥90dB • Frequency Response 15 Hz – 22 kHz (-3dB) • THD ≤0,1% (1 kHz, 4Ω, 90% Power) • External Bluetooth® USB-Dongles BTS, BTS-HD &amp; BTA2 for Audio Streaming &amp; App Control (optional) • Digital remote control DRC1 with OLED display for controlling various DSP functions (optional)  Specification Power output(RMS) @ 13.8 VDC, 1% THD: 8 x 50/75 Watts RMS @ 4/2 Ohms or 4 x 150 Watts RMS @ 4 Ohms bridged 8 x High Level Input 10 or 18 V RMS 1 x AUX Input/Stereo (RCA) 4 V RMS 1 x Optical Input/Stereo (PCM, 96 kHz / 24 bit) 8 x Loudspeaker Output amplified 2 x Pre-Amplifier Output (RCA) 4 V RMS (configurable via DSP) Dimensions: 127 x 37 x 205 mm 

ONE600 Mono Class D Amplifier·650 Watts RMS  Features Start-Stop ready, Auto Turn-On EPS (Error Protection System) Interference Free Technology, EMC proved PURE IN&gt;OUT Function High and Low Level Inputs Brushed aluminum heat sink and end panels Compact Bass Level Remote Controller  Specification Power output(RMS) @ 14.4 VDC, 1% THD: 1x250/400/650@ 4 Ω/2 Ω/1 Ω Subsonic-Filter 10 - 40 Hz, Lowpass Filter 40 - 150 Hz Bass Boost 0 - 18 dB, Phase 0 - 180° Filter Bypass Function (Pure Amplification) Quick Connect Speaker Output Dimensions: 150 x 45 x 200 mm 

ONE1000 Mono Class D Amplifier·1050 Watts RMS  Features Start-Stop ready, Auto Turn-On EPS (Error Protection System) Interference Free Technology, EMC proved PURE IN&gt;OUT Function High and Low Level Inputs Brushed aluminum heat sink and end panels Compact Bass Level Remote Controller  Specifications Power output(RMS) @ 14.4 VDC, 1% THD: 1x435/710/1145@ 4 Ω/2 Ω/1 Ω 1 x 400/650/1050 Watts RMS @ 4/2/1 Ω Subsonic-Filter 10 - 40 Hz, Lowpass Filter 40 - 150 Hz Bass Boost 0 - 18 dB, Phase 0 - 180° Filter Bypass Function (Pure Amplification) Quick Connect Speaker Output Dimensions: 150 x 45 x 240 mm 

10-Channel Class D Amplifier with 14-Channel DSP   Features • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP (ADAU1466) • 32bit, 295 MHz DSP technology, controllable via new V3 PC software or Tunest App • Signal-to-noise Ratio ≥95dB • Frequency Response 15 Hz – 22 kHz (-3dB) • THD ≤0,05% (1 kHz, 4Ω, 90% Power) • Separately controllable input sensitivity (Channel 1-8, Channel 9-10, AUX), Clipping LEDs • External Bluetooth® USB-Dongles BTS, BTS-HD &amp; BTA2 for Audio Streaming &amp; App Control (optional) • Digital remote control DRC1 with OLED display for controlling various DSP functions (optional)  Specification Output Power @ 13,8 VDC, 1% THD: 8 x 155 Watts RMS @ 2 Ω (Channel 1 - 8 DHR*) + 2 x 220 Watts RMS @ 2 Ω (Channel 9 / 10) 8 x 80/135 Watts RMS @ 4/2 Ω (Channel 1 - 8) + 2 x 120/220 Watts RMS @ 4/2 Ω (Channel 9 / 10) Output Power bridged @ 13,8 VDC, 1% THD: 4 x 310 Watts RMS @ 4 Ω (Channel 1 - 8 DHR*) + 1 x 440 Watts RMS @ 4 Ω (Channel 9 / 10) 4 x 270 Watts RMS @ 4 Ω (Channel 1 - 8) + 1 x 440 Watts RMS @ 4 Ω (Channel 9 / 10) 12 x High Level Input with EPS（CH 1-8: 8 - 24 V/RMS , CH 9-10: 8 - 32 V/RMS) 6 x RCA Low Level Input (RCA) 2 – 6 V RMS 1 x RCA AUX Input/Stereo 2 – 8 V RMS 1 x Optical Input/Stereo (PCM, 192 kHz / 24 bit) 4 x RCA Pre-Amplifier Output (configurable via DSP) 12 x Loudspeaker Output amplified Dimensions: 280 x 45.5 x 166 mm   

東莞市天逸電子有限公司

This is a car amplifier that comes with a high-precision structure for reliable performance. It is sturdily constructed for enhanced durability. This car amplifier offers an extra-long lifespan.
 
  Channel: 125W x 4. 
  Good performance. 
 

This is a car amplifier that is made of top-quality material for long-lasting use. It is well designed to deliver superior sound quality with reliable performance. This car amplifier is easy to install and maintain.
 
  1,500W x 1 car amplifier with a remote control. 
  Good performance. 
 

This is a car amplifier that comes with a robust housing for enhanced durability. It is well designed to deliver excellent sound quality with high fidelity. This car amplifier is an ideal addition to complete your vehicle.
 
  Power: 1 x 1,200W. 
  Digital class D mono block with a remote control. 
 

我的採購