TRANSMITTER
- Operating Voltage: DC 12V
- Operating Frequency: 433Mhz
- Vibration Resistance: 334
- Modulation: ASK (Stable, less interference)
- Encode Type: Group Coding or Pads
- Battery Type: 12V 27A(not included)
- Remote Distance: 20m (Theoretical value)
- Ambient TEMP: -30℃ -70℃, Humidity<95%
- Product DIM: 54x30x13mm
RECEIVER
- Input Voltage: AC 220V
- Operating Frequency: 433Mhz
- Operation Way: Inching, Self-locking, Interlocked
- Coding Way: Intelligent Learning
- Output Type: Active output
- Max load: 1000W
- Ambient TEMP: -20℃ -65℃, Humidity<95%
- Factory Default: Interlocked
- Board DIM: 45x30.5x17mm
- Case DIM: 65x37x22mm
PACKAGE INCLUDED
1X Transmitter (Battery is not included)
1X Receiver
1X English Manual
Three modes:
Inching: press&hold one button, the reply turns on, release the button, the reply turns off.
Self-lock: press the one button, the reply turns on, press the button again, the reply turns off.
Interlock: press the one button, the reply turns on, press the next button, the reply turns off.
Steps:
Clear:
Press&hold the program button on the receiver, the red light will turn on and stay on for about 5 seconds.
Choose the mode:
inching:release the button after the light flashes once.
Self-lock:release the button after the light flashes twice.
Inter-lock:release the button after the light flashes three times.
Link the remote control:
Press the program button on the receiver until the red light turns on, and then release the program button, the red light will stay on.
Press a transmitter button, and the red light will flash, at this time, it means finished linking.