請輸入包含最少兩個字母或數字的關鍵字。
Please don’t share FPV videos with strangers, it’s time to encrypt video!
We collect CVBS video and perform AD (analog-to-digital) conversion, encrypt the converted digital signal through FPGA, reprocess the video image, and then output it for DA (digital-to-analog) conversion, and convert it into a standard CVBS output to the transmitter.
We convert the CVBS video signal received by the receiver into AD (analog-to-digital), decrypt the converted digital signal through FPGA, reprocess the video image, and then output it for DA (digital-to-analog) conversion, and convert it into a standard CVBS output to the display.
1: Open the configuration software, find the corresponding serial port number, select and open the serial port, and click “read” to read the current device parameters.
2: Select “Scramble” or “Descramble” mode and enter the required scramble or descramble sequence.
3: Press “Write” to write data.
Special case description: Due to the differences in the video amplitudes of cameras, video transmitters, and video receivers produced by different manufacturers, the video brightness may not be enough during use. If this happens, please follow the steps below to modify the module.
1. First remove the resistor on the “1” position.
2. If the video amplitude is still not enough, remove the resistor on the “2” position and short it.
A: After adding our scrambler and descrambler modules, the delay may increase by 0.1 to 1 milliseconds.
A: