This RGB (built-in IC) dream strip light has a smart LED control circuit and light emitting circuit in one controlled LED source and same to APA104 and Ws2812B, SK6812 IC LED controller.
Each lighting element is a pixel, and the intensities of the pixels are contained within the intelligent digital interface input.
The output is driven by patented PWM technology, which effectively guarantees high consistency of the color of the pixels. The control circuit consists of a signal shaping amplification circuit, a built-in constant current circuit, and a high precision RC oscillator.
The data protocol being used is unipolar NRZ communication mode. The 32-bit data is transmitted from the controller to DIN of the 1st element, and if it is accepted it is extracted pixel to pixel.
After an internal data latch, the remaining data is passed through the internal amplification circuit and sent out on the DO port to the remaining pixels. The pixel is reset after the end of DIN. Using automatic shaping forwarding technology makes the number of cascaded pixels without signal transmission only limited by signal transmission speed.

Features:

• 5 voltage are available: 5 VDC Version (30 pieces/ meter).
• 5 VDC version (60 pieces/ meter).
• 5 VDC version (144 pieces/ meter).
• High brightness.
• Scattering angle.
• Good consistency.
• Low power.
• Long life. 
• Control circuit is integrated in the strip light above.

KL593D RGB dream flex-strip light 30LEDs/meter (5V version):

• Working voltage: DC5V.
• LED quantity: 30LEDs/meter.
• LED type: SMD5050.
• Quantity: 30pieces KL593D RGB IC LED.
• Pixel quantity: 30pixels/meter.  
• PCB color: white / black color.
• Power consumption: max 7.5W/M.
• Gray scale level: 256 levels.
• Emitting color: R: 620-630nm, G:515-525nm, B:460-475nm.

KL593D RGB dream flex-strip light 60LEDs/m (5V version):

• Working voltage: DC5V.
• LED quantity: 60LEDs/meter.
• LED type: SMD5050.
• Quantity: 60pieces KL593D RGBIC LEDs.
• Pixel quantity: 60pixels/m.
• PCB color: white / black color.
• Power consumption: max 15 W/M.
• Gray scale level: 256 levels.
• Emitting color: R: 620-630nm, G:515-525nm, B:460-475nm.

 
KL593D RGB dream flex-strip Light 144LEDs/m (5V version):

• Working voltage: DC5V.
• LED quantity: 144LEDs/meter.
• LED type: SMD5050.
• Quantity: 144pieces KL593D RGBIC LEDs.
• Pixel quantity: 144pixels/m.
• PCB color: white / black color.
• Power consumption: max 37 W/M.
• Gray scale level: 256 levels.
• Emitting color: R: 620-630nm, G:515-525nm, B:460-475nm.
• (KL593D RGBIR-2048, drive 2048 pixels).
• (5V KL593D RGBIR controller for reference).