Lavalier Wireless Microphone M6,

1. Packaging List

Microphone Transmitter *1 Receiver *1

USB Type-C Charging Cable *1 Extra Clip*l

Extra Microphone Windscreen *2 Storage Bag *1

User Manual *1

2.

①    Microphone Windscreen

②    Microphone Indicator

③    Microphone Charging Port

⑦ Port to Connect iPhone/iPad (§) Receiver Indicator

⑨ Receiver Reset Pin Hole [Pin is required]

② Microphone Clip

⑤    Power Button

⑥    Microphone Reset Pin Hole [Pin is required]

@ Port of Receiver

3. Pairing

Step 1:

Receiver: Plug in the iPhone/iPad (The RED light should be on.)

Step 2:

Microphone Transmitter: Press the power button (The GREEN light should be on.)

All set and have fun!

4. Power off/Disconnect

Microphone Transmitter

Long press the power button for around 5 seconds to turn off If there is no connectivity, it will shut down after 3 minutes.

Receiver

Plug off the device (light off)

Note:

Press the power button of microphone transmitter once to pause (The BLUE light should be on.)

The product does not support to make phone calls.

5. Charging

Microphone Transmitter

Charging - Blue LED Lighten

Fully Charged - LED Light off

Note:

While recording, your iPhone/iPad could still be charged via the Lightning port.

Plug into the port of receiver

6. Reset

Kindly take the following steps if the microphone transmitter fails to pair with the receiver.

Step 1:

Plug the receiver in the iPhone/iPad and use the pin to poke the reset pin hole of receiver twice.

(The RED light should be blinking.)

Step 2:

Turn on the microphone transmitter and use the pin to poke the microphone reset pin hole twice.

(The GREEN light should be blinking.)

After the second step, the transmitter and receiver are paired again.

The LED light on both devices will stop blinking.