Shenzhen JDB Technology Co., Ltd.
請輸入包含最少兩個字母或數字的關鍵字。
PCB Prototype Double Layer PCB Fabrication
品牌名稱:
PCBGOGO
顏色:
GREEN
港口:
Shenzhen
付款方式:
T/T, PayPal
最低訂購數量:
5 piece(s)
是否有包裝:
有
是否可訂造:
是
板厚:
0.4mm-2.4mm
最小線距:
0.1mm
最小線寬:
0.1mm
基板材質:
fr-4
銅厚:
1~3oz
最小孔徑:
0.1mm
表面處理:
HASL WITH LEAD /HASL Lead free/enig
鍍通孔種類:
鍍通孔印製電路板
描述
聯絡供應商
描述
- PCBGOGO PCB Board Fabrication Capabilities
- Items Fabrication Capabilities Remarks Picture
- Layer Count 1-10 layers 1-10 Layers PCB fabrication will be provided online order by PCBGOGO. If your PCB order is over 10layers, please contact your customer service for quotation.
- Material FR-4 94V0/ Aluminum For FPC, HDI, ROGERS, HAlOGEN-FREE, HIGH TG ETC., contact your customer service.
- Maximum
- PCB Size 500x1100mm The max. size of PCBGOGO PCB is 50*40cm. and we accept longer PCB board which max. length is 1100MM
- Minimum
- PCB Size 3mm*3mm
- Maximum
- Panel Size 50cm*45cm
- Minimum
- Panel Size 7.5*7.5CM If you need v-cut, this is minimum panel size in PCBGOGO
- Tolerance
- size of
- board
- (outline) ±0.2mm CNC tolerance is ±0.2mm, v-cut tolerance is ±0.5mm
- Board
- Thickness 0.4-2.4mm The thickness we could fabricate is 0.4/0.6/0.8/1.0/1.2/1.6/2.0/2.4
- Tolerance
- thickness of
- board
- ( t≥1.0mm) ±10% Pay attention: as the capability (PTH, solder mask and others) will add the board thickness, we usually use Plus Tolerance.
- Tolerance
- thickness of
- board
- ( t≥1.0mm) ±0.1mm Pay attention: as the capability (PTH, solder mask and others) will add the board thickness, we usually use Plus Tolerance.
- Min. Line
- Width 4mil(0.1mm) Min. Line Width is 0.1mm；In terms of multi-layer PCBs, Min. Line Width for inner-layer is 0.175mm, and
- 0.1mm/4mil for outer layer. if the minimum line width is less than 6mil , there will be an extra charge / fee.
- Min. Line
- Space 4mil(0.1mm) Min. Line Spacing is 0.15mm/6mil. If Min. Line Spacing is less than 6mil, it will charge extra fee.
- Outer Layer
- Copper
- Thickness 35um/70um/105um （1OZ/2OZ/3OZ） It means the thickness of copper in outer layer. 1 OZ＝35um, 2OZ=70um, 3OZ=105um.
- Inner Layer
- Copper
- Thickness 35um/50um(1OZ/1.5OZ) Default is 1OZ, but if you have special requirement, 1.5 OZ is acceptable./td>
- Drill
- Diameter
- Range 0.2-6.3mm Min. Size of drill via CNC is 0.2mm. 6.3mm is maximum size.
- Annular
- Ring ≥0.1mm（4mil） If Annular Ring is smaller but there is enough space, there is no limit for the Annular Ring size. But if there is not enough space coupled with dense lines, the Annular Ring size should be over 0.1mm.
- Finished
- Hole Size 0.2--6.20mm Because the copper will cover the surface of hole, the Finished hole size is smaller than it is in Gerber file.
您或許喜歡
確定要取消關注此供應商？