Stairway, Car Parks, Walkways, Corridor, Basement, Back Yard, Lifts Etc Some Low-Activity Areas.
開關類型:
感應開關
描述
聯絡供應商
描述
2017 NEW PIR SENSOR CEILING LIGHT
WITH POWER 4W TO 20W AS DIFFERENT WATTAGE AVAILABLE
WITH EMERGENCY BATTERIES OR WITHOUT FOR OPTIOANL.
WELCOME TO MAKE ANY CUSTOMIZED.
LED PIR Sensor Ceiling Light
Voltage: DC12V,DC24V, AC110V-220V/50Hz-60Hz
LED Drive: High Efficiency Constant Current
Power Factor(PF):>0.9
LED chip Type: Sanan SMD 2835 LED
Lumen Efficiency (lm/cctW):90lm/W ( Our led chips are in high quality, up to 90LM/W for whole fixture)
CCT(K): 3500K, 4500K, 5500K, 6500K
CRI(Ra):>80
Detection Range: >7m (120° ×360°)
Light-control: Daylight Sensor control (adjustable) (0.5-25lux)
Time setting: 30sec to 2min (adjustable)
Ambient Light:<5Lux
Detection Motion Speed: 0.6~1.5m/s
Working Temperature: -25°c - +30°c
Working Humidity: <93%RH
Installation height(m): 2.5-5m
Material: Iron base+ PMMA cover
Finish: White
IP20
Lifespan(Hrs):50,000 hours
Box Qty:10pcs/CTN
PIR sensor led wall light is with Infrared motion sensor, which turns on the light on detection of people movement, and turns off after a pre-selected hold-time when there is no people around.
A daylight sensor built-in is also to prevent the light switching on when there is sufficient natural light.
A HOLD TIME MEANS THE TIME OERIOD YOU WOULD LIKE TO KEEP THE LAMP ON 100% AFTER THE LEFT THE DETECTION AREA.
DIP Switch to make easily and convenient adjustment on time, sensor distance and lux control
How dose it work:
With sufficient natural light, the light doesn’t not switch on when presence detected.
With insufficient natural light, the sensor switches on the light automatically when person enters the room.
The sensor switches off the light automatically after the hold-time when there is no motion detected.