我的採購

請輸入包含最少兩個字母或數字的關鍵字。

廣州市銥泰電子科技有限公司
查詢

免責聲明

本網頁的連接可將閣下連往其他網址而閣下承認並同意,香港貿發局及其各聯號公司對連接網址所提供的任何資訊的準確性或有效性,不負任何責任。

連接其他網址並不構成香港貿發局對該等網址或者該等網址所提供的資訊、產品、廣告或其他材料的認可。

分享此頁面
Phase Detector
分享此頁面
產品型號:
ETCR1000A
品牌名稱:
ETCR
顏色:
Red
尺寸:
70 x 75 x 30mm
港口:
Guangzhou
付款方式:
T/T
描述
聯絡供應商
描述

Presented is a phase detector which is manufactured for positive and negative phase detection. The phase detector is designed to perform phase sequence checks and live line checks of a 3-phase circuit using a static induction voltage clip. The main console features a LED display for showing test status.

  • Function: phase detection positive/negative.
  • Display: LED.
  • Weight (g): 270.
  • Continuously using 200 hours.
  • The static induction voltage clips are used to be able to clip on a clayed wire.
  • Meets IEC-10101 (EN61010), CAT Ⅲ (600V) safety requirement.
  • Red LED lamps are used to make the indication visible in dimly lit areas.
  • The direction of phase sequence can be checked easily using the LED lamps, which blink in order.
  • Technical functions: phase detection (normal phase, reverse phase and phase deficiency), live wire examination, simple power detection, breakpoint location and line maintenance.
  • Power supply: DC 3V AA Mn batteries (R6P) x 2pcs, continuously working for 200 hours.
  • Live voltage range: AC0~600V, 40~70Hz (Sine Wave Continuous Input)
  • Clamp wire size: diameter ø18mm, insulated wire available (equivalent to wire cross-sectional area 120mm²).
  • LED display.
  • Positive phase: four lights of phase detection rotate in clockwise direction, with intermittent short beeps.
  • Reverse phase: four lights of phase detection rotate in counterclockwise direction, continuous beep.
  • Live power: R-S and S-T lights on within voltage setting range.
  • Phase deficiency: R-S, S-T lights do not flash.
  • Open circuit: R-S, S-T lights do not flash.
  • Boot indication: boot indication light turns on after booting.
  • Auto power off after 3 minutes, the meter automatically cut off power supply.
  • Clamp lead length: 0.5m.
  • Meter weight: 180g (with battery).
  • Working temperature and humidity: -10℃~55℃; below 80% RH.
  • Storage temperature and humidity: -20℃~60℃; below 90% RH.
  • Maximum measured voltage: AC 600V.
  • Dielectric strength: 5.4kVrms.
  • Maximum rated power: 100mVA.
  • Safety provisions: EN61010-1: 2001, EN61010-031: 2002, pollution level 2, CAT III (600V), transient over-voltage 6000V.
  • Meter: 1 piece.
  • Carrying case; 1 piece.

廣州市銥泰電子科技有限公司

廣州市銥泰電子科技有限公司

中國內地廣東省

製造商

您或許喜歡

確定要取消關注此供應商?