NEWTECH is a polyester based paste and hardener. The paste and hardener are supplied separately, and once mixed is becomes a user friendly filler which is ideal to repair damaged alloy, metal, masonry, stone, aluminium and fiberglass parts real fast. It also contains rust inhibitor, aluminium, carbon fiber and fiberglass strands which provide excellent bridging properties and reduce sagging for covering those large holes. No need to weld in patches. NEWTECH moulds like putty and can set hard within minutes. The cured colour is a dark grey. NEWTECH be used inside or outside and can be painted within the hour. Do not replace those expensive metal parts, repair them with NEWTECH!
NEWTECH is economical and strong when filling large holes in metal sheets and masonry. Typical examples are vehicle crash repair work, rusted industrial bonnets, repairing holes due to rust in metal piping and concrete steps. You can vary the ratio of putty to hardener and speed up or slow down how fast the putty cures, to suit the job you are doing. NEWTECH goes through curing stages and can be wiped off, spread by putty knife, shaped and cut while it cures, and it will result in a hard sandable surface when completely cured. Then it can be painted. Once hardened, you can treat it like steel and file, sand, saw, drill, machine, tap, paint, nail and screw into it! Ideal for repairing rust. The perfect repair product for the professional or home owner DIY enthusiast!
NEWTECH has been successfully used by professional builders and DIY home owners since 1995!