我的採購

    請輸入包含最少兩個字母或數字的關鍵字。

    眾凱電子(香港)有限公司
    查詢
    分享此頁面
    Smart Car Battery charger
    分享此頁面
    數量
    生產所需時間:
    40 日
    產品型號:
    ICC40T
    港口:
    Shenzhen
    付款方式:
    T/T
    最低訂購數量:
    1,000
    電壓:
    12伏
    類別:
    充電器
    描述
    退貨及退款
    聯絡供應商
    描述
    • Input Voltage
              100-240V 50-60Hz
    • Output Voltage
              6V/12V AUTO
    • Output Current
              1A/4A (48W)
    • Battery Type
              Wet Gel MF EFB AGM & LioN
    • Housing
              Fire retardant plastic, IP65
    • Operation Temperature
              -10℃ to 45℃
    • Warranty
              One year
    • Ideal  to charge and maintenance battery with the 1A/4A charging current for your 6V and 12V battery, fully automatically detected and selected the voltage setting.
    • 8 steps fully automatic switch mode charging for greater power absorption
    • 12V 4A charging current and able to handle battery size up 150Ah
    • Battery condition detection and polarity protection
    • Dead or unresponsive battery detection
    • Fully automatic with trickle charging
    • Water resistance IP65, rating 
    • Spark Free System
    • SC/OL protections
    • Polarity detection
    • Step1. Qualification
    Initially ensures that the battery is in good condition prior to charge. As a safety measure charge process will not begin if battery is below 7.5V.
    • Step2. Pulse Mode
     Pulse mode provides a pulse charge to help the newly recovered battery to continue to accept charge as it enters the reconditioning phase.
    • Step3. Recondition
    The reconditioning phase continues to work the battery at a slightly higher voltage and amperage to “re-activate” the battery plates for improved depth of charge and charge acceptance.
    • Step4. Bulk
    With the battery now through Pulse and reconditioning phases and well on its way to full recovery, the bulk charge phase gives the battery constant current taking the battery up to 80% of its capacity.
    • Step5. Absorption
    In the absorption phase the battery is given constant voltage while the charge current is gradually reduced according to raise of battery voltage.
    • Step6. Full
    The charge will stop until the battery is 100% charged.
    • Step7. Analysis
    Battery will now checked to be sure that it is holding a charge properly and the charger will make a determination and pass the battery for service, or not.
    • Step8. Maintenance
    The battery charger keeps under control the voltage of the battery.

    退貨及退款
    Thank you for your interest in our products. Please let us know via "Contact Supplier" function if you have any queries or require assistance.

    香港貿發局參展商
    眾凱電子(香港)有限公司

    眾凱電子(香港)有限公司

    香港

    出口商, 製造商

    您或許喜歡

    確定要取消關注此供應商?