100-277vac dali-2 & push dimmable led driver has built-in NFC function to adjust output voltage and set address code through the application, dimming range between 0-100%, suitable for indoor intelligent lighting projects

■Features

·Output constant Voltage  

·Range: 100-277VAC     

·Built-in active PFC function  (NFC regulation) 

·PF＞0.98@120VAC; PF＞0.96@230VAC   

·Efficiency up to 88.5%     

·Standby power consumption≤0.5 W   

·Protections: short circuit/ over load / over temperature    

·Cooling by free air convection; 

·IP66 for indoor & outdoor (suitable for dry & damp & wet location);      

·Dimming curve: Logarithmic (default) and Linear;    

·Dimming protocol: DALI-2 Protocol IEC62386; PUSH-DIM (CCT dimming)

·NFC function to adjust output voltage and set address/ID 

·Dimming range: 0-100%, LED start at 0.1% possible

·Flicker-free, PWM output frequency, 4K Hz Stroboscopic exemption

·Dimming range: 0-100%, LED start at 0.1% possible

·Suitable for intelligent LED lighting 

※Input & Output wiring 

※Input electronic cable 3*18AWG, the green cable connect with (FG) ,Black with AC (L), White with AC(N) (US);

※Output : 12V electronic cable 3*16AWG to be connected to LED Light;  

          24V electronic cable 3*18AWG to be connected to LED Light;  

※Dimming cable   

※Dimming electronic cable 3*18AWG, Brown DA/N and Purple DA/L (No polar) connected to the DALI BUS when use DALI function.

Brown (N) is connected to AC (N) while Purple (L) and pink (CCT Push )connected to CCT Push dim switch dimmer( L) when use Push function.

※Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.

CCT (TW) dimming: electronic cable, Black is output ( V+) Positive, While (CW-) and Yellow (WW-) are output (V-) negative  

Note:  there is external antenna at output side.  Don't disassemble!