工業機械，零件及原材料

industrial

搜羅全球頂尖工業機械，零件及原材料公司提供的工業機械，零件及原材料資訊。您可在貿發網採購平台即時諮詢可靠和專業的產品供應商，以獲取詳盡的資料及報價。

工業機械，零件及原材料供應商和製造商

Industrial Machinery, Parts & Raw Materials

茂林(香港)線路板有限公司

   電子線路板生產線之環保儀器。  

環保儀器

東安實業(香港)有限公司

 	 Food Waste Disposer 560W  FOOD WASTE DISPOSER

Technology adds more grind stages that reduce food scraps into smaller particles than ever before by breaking down food waste&nbsp;again &hellip; and even again.&nbsp;

Garbage disposals had just a single grind stage to break down food waste. MultiGrind uses multiple&nbsp;stages of grind technology to break down&nbsp;food waste to a fine pulp that is easily washed away.

Food Waste Disposer (560W)

 	 Rated Power 370W 	 Rated Voltage 220V 	 Frequency 50Hz 	 Rotation speed 2600R/MIN 	 Cable Length 1m  

Food Waste Disposer

福州華諾技術服務有限公司

 Describle: 
&nbsp;The dispensing system, diaphragm pump was designed and Intended built for the distribution of the product called AdBlue, AUS32 or use water etc. It&#39;s Ideal for IBC transfer systems, Permanent magnet pump continuous duty.
 Feature:  	 On/Off switch, easy operated 	 Permanent magnet and continuous duty 	 Built-in back flow&nbsp; 	 Self-priming so pump can be located above water tank 	 Runs dry for extended periods of time without damage 	 Hold excellent motor keep stable temperature of pump body 2m cord plug 	 Stable performance, easy operation   Technicial Sepcification  	  Moedel No.:  FL-540A 	  Voltage  AC230V 	  Frequency  50/60Hz 	  Current  2A 	  Power  On/Off switch 	  Pressure Switch  Backflow design instead of Pressure switch 	  Max Flow  45L/Min (6.8GPM),or 45L/Min for choose, if you have other require pls, contact with us 	  Pressure Off  35PSI /2 Bar, Pressure can be adjust according to customer&#39;s require 	  Speed  2900rpm 	  Body Materials  Aluminum 	  Protection  IP55 	  Liquid of&nbsp; Transfer  AdBlue, AUS 32, Water etc.​  
 Application:  	 This pump is perfect for 	 boats, RVs (Recreation Vehicles) 	 Mobile Car washer, Sprayer 	 Agricultural Irrigation 	 Any place need water transfer&nbsp; etc 	 IBC TransferProduct details  

40L/Min Self Priming Adblue Pump with CE Certificate

 Describle: 
High flow HL serives pumps are designed for a while range of applications and&nbsp;are constructed from a selection of materials suitable for handling a broad range of chemicals.
 Feature:  	  ​ 5 chamber high flow pumps, self-priming and can run dry without damage 	 Intended for intermittent duty cycles but can be run continuously for short periods of time 	 light weight and smart , high pressure 	 easy to install, steady performance 	 Build in Pressure switch, over-heat protection 	 medium temperature: 60&ordm;C 	 suitable&nbsp;for adbule, acidity,alkaline and corrosive liquid etc. 	  Technicial Sepcification  	  Moedel No. : FL-12A 	  Voltage  :DC 12V 	  Frequency:  50/60Hz 	  Current:  16A 	  Pressure Switch:  Build in 	  Max Flow : 40L/Min (6.6GPM),or 45L/Min (7.92GPM) for choose, if you have other require pls, contact with us 	  Pressure Off : 40 PSI /2.75 Bar, Pressure can be adjust from 30psi to 70 psi according to customer&#39;s require 	  Speed:  2900 	  Body Materials:  Aluminum 	  Protection : IP55 	  Liquid of&nbsp; Transfer:  AdBlue, Water etc. 	  Application:  	 This pump is perfect for:water transfer, delivery 	 spraying 	 Agricultural Irrigation 	 dispensing and pressure boosting etc.  

DC Self-Priming Pump for Spraying

 Describle: 
&nbsp;&nbsp; &nbsp; &nbsp; &nbsp;The dispensing system, diaphragm pump was designed and Intended built for the distribution of the product called AdBlue, AUS32 or use water etc.
&nbsp;&nbsp; &nbsp; &nbsp;&nbsp;Ideal for IBC transfer systems, Permanent magnet pump continuous duty.
 Feature:  	 On/Off switch, easy operated 	 Permanent magnet and continuous duty 	 Built-in pressure switch automatically starts and stops pump when faucets is opened and closed 	 Self-priming so pump can be located above water tank 	 Runs dry for extended periods of time without damage 	 Hold excellent motor keep stable temperature of pump body 2m cord plug 	  Technicial Sepcification  	  Moedel No.:  HL-230A 	  Voltage  AC230V 	  Frequency  50/60Hz 	  Current  1.5A 	  Power  On/Off switch 	  Pressure Switch  Build in 	  Max Flow  25L/Min (6.8GPM),or 30L/Min for choose, if you have other require pls, contact with us 	  Pressure Off  35PSI /2 Bar, Pressure can be adjust according to customer&#39;s require 	  Speed  2900rpm 	  Body Materials  Aluminum 	  Protection  IP55 	  Liquid of&nbsp; Transfer  AdBlue, AUS 32, Water etc.​ 	  Application:  	 This pump is perfect for 	 boats, RVs (Recreation Vehicles) 	 Mobile Car washer, Sprayer 	 Agricultural Irrigation 	 Any place need water transfer&nbsp; etc 	 IBC Transfer  

Adblue Pump for IBC Transfer Systems with Pressure Switch

迅特亞洲有限公司

 Speed through smart technology  	 The S3 digital cutter is fast. The basis for the S3&#39;s outstanding productivity are intelligent control software, a fast drive system, and cutting technology perfected over many years. Z&uuml;nd tools optimally designed for use on the S3 complete the system.   Adaptable production processes  	 S3 multi-functional cutting system allows for many and variable cutting processes. With the addition of sophisticated material-handling solution, you can increase production capacity many times over.   Best price-performance ratio  	 The price-performance ratio of the S3 cutter series is excellent. Only the most modern technology and highest-quality components are used. The flexibility, reliability, and quality of the S3 cutter cannot be matched by any competitor.   FLEXIBLE Modular cutter concept  	 With modular tool and material-handling systems, you can tailor your S3 cutter to your specific requirements. Z&uuml;nd&#39;s modular design concept lets you customize your cutting solution according to your specific production requirements.   A flexible choice of tools  	 You have the flexibility to choose precisely the tools you need for the job at hand. Combine the required tools based on your specific requirements. You can equip the S3 with up to two different tools.   Cutting surface and material hold-down  	 The S3 cutting surface is made of acrylic. The material is held down with vacuum and infinitely adjustable across the width. Energy-efficient vacuum generators ensure optimal material hold-down.   Ergonomics and operation  	 The design and build of the S3 are consistently aligned with the needs of our customers. Ergonomic design, easy handling, and user-friendly operation are the result.   Precise stacking with robot  	 Automate picking and sorting of cut parts with a collaborative robot. This enhances the level of automation of your cutting solution and increases productivity. The collaborative robot requires no guards or protective devices.  

Zund S3 Cutting Machine

Hop Yuen Ind'l Ltd

 	 The powder suction device in the spray chamber is sent to a cyclone centrifugal tower to collect the powder in the powder drum (primary recovery), and the remaining part is filtered for further recovery (secondary recovery). 	 The device has the advantages of high recovery rate, convenient color change, compact structure, convenient installation and low noise. Ideal equipment for powder collection.  

Pol Ish Dust Collecter System

 	  Quality at the highest level  	 The G3 Cutter is a precision machine. From innovative drive system to blade, all components are perfectly coordinated. Produce your jobs at the highest quality level, economically and efficiently. Your customers will be thrilled with the results. 	  Modular design for maximum flexibility  	 The extraordinary modularity of our cutting solutions is truly unique. You can always make your G3 cutting system adapt to new requirements with modifications and upgrades. Z&uuml;nd cutters are a safe investment and offer maximum value retention. Z&uuml;nd&#39;s modular design concept lets you put together a tailor-made cutting solution configured to meet specific production needs.&nbsp; 	  Unsurpassed price-performance ratio  	 The price-performance ratio of the G3 cutter series is outstanding. We use only the most modern technologies and highest-quality components. The flexibility, reliability, and quality of the G3 cutter cannot be matched by any competitor. 	  Maximum productivity  	 The overall productivity of the G3 cutting system is unrivaled. We achieve this through the use of intelligent control technology, robust machine components, and sophisticated cutting technology. All components are perfectly coordinated. 	  Flexible tool configuration  	 Define which functions your G3 cutter has to perform and configure your modular Z&uuml;nd tooling accordingly. 	  Integrated Tool initialization  	 The setup of of knife-cutting, routing, and creasing tools occurs fully automatically. The ITI Initialization System makes the process quick and precise.&nbsp; 	  Optimal material hold-down  	 Energy-efficient vacuum turbines ensure reliable material hold-down during the cutting process. The vacuum area is divided into zones, which can be switched on and off individually across the width of the machine.&nbsp; 	  Process materials up to 110 mm/4.3 in thick  	 On a G3 cutting system, you can process materials up to a thickness of 110 mm/4.3 in. Depending on your requirements, the G3 can be configured with a beam height of 60 or 120 mm/1, 2 or 4 in. This means more flexibility and versatility in your production workflow. 	  Ergonomics and operation  	 Configure the D3 according to your specific needs, with cutter extensions and/or material-handling solutions. Just like the cutter, all these options were designed with an eye towards ergonomics. The cutter is easily accessible from all sides, which ensures an efficient production workflow. 	  Automatic Router bit Changer - ARC  	 The automatic router bit/tool changer ARC dramatically reduces set-up times and simplifies tool handling. The magazine can accommodate up to eight different cutting, polishing, or engraving bits. The bits needed for processing are automatically removed, clamped, initialized, and cleaned after each use. The ITI initialization system checks the zero point after each tool change, ensuring perfectly consistent routing depths.  

Zund G3 Cutting Machine

佛山市南海科日超聲電子有限公司

型号MODEL: KR300 功耗POWER: 120W 电压VOLTAGE: AC220V 出雾量FOG VOLUME: 1600ml/H 尺寸SIZE: 550mm*362mm*206mm 覆盖面积COVER SIZE: 300m² 材料MATERIAL: PP+ABS 噪音NOISE: ≤55dB 净重NET WEIGHT: 4.5KG 最大出雾高度MAX ATOMIZERING DISTANCE: 3.5M 水雾直径MIST PARTICLE DIAMETER: ≤5μm 湿度控制范围HUMIDIFICATION CONTROL RANGE: 40-90%RH  超细水雾颗粒直径≤5μm。Diameter of ultra-fine water mist particles ≤5μm. 大雾量，单机出雾量高达1.6KG/H。Large fog output, single machine fog output up to 1.6KG/H. 覆盖空间大，达到300m²。The coverage space is large, reaching 300m². 系统化，可以自由组成大型加湿系统。Systematic, can be free to builda large humidification system. 无需人工加水，可直接连接水管。Itcan directly connect the water pipe without manually filling water. 故障自动溢水，可靠的安全保护。Fault automatic overflow, reliable safety protection。 湿度智能控制，可选择舒适的湿度。Humidity intelligent control, can choose comfortable humidity. 高效节能。Efficient and energy saving. 采用银离子抑菌技术。Silver ion bacteriostatic technology used. 

Wall mounted sterilizer KR300

 Integrated Compact Color Camera -ICC 
State-of-the-art sensor technology, high-quality optics, and adjustable LED lighting: the ICC camera detects the exact position of printed material in the cutting area enabling perfect registration.
Perfectly positioned in the center of the module, the camera is able to cover the entire working area.
No matter the lighting conditions - low ambient light, reflective materials, or low-contrast colors registration with the ICC camera is always possible!
All benefits at a glance 	 Fast and easy setup. 	 Reliable and accurate recognition of registration marks and material edges. 	 The laser pointer is used for visual determination of the reference point and facilitates orientation. 	 Completely supported in Z&uuml;nd Cut Center - ZCC with algorithms that intelligently process image data in a matter of seconds. 	 Full compatibility with the OCC camera. Switching between the two systems is seamless.  The Over Cutter Camera - OCC is an intelligent optical system for fully automated digital capture of register marks. The camera is mounted above the center of the cutter, either on a support frame or the ceiling. It captures all register marks within the working area of the cutting system in a single image &mdash; automatically and in a matter of seconds.

 Over Cutter Camera-OCC 
Because of the OCC&#39;s one-shot capture technology, the number of register marks and their position on the cutting surface become completely irrelevant, which significantly increases the overall productivity of the cutting system. OCC data processing functions are completely integrated in the ZCC software: in seconds, powerful algorithms analyze the camera data and compensate for any distortions.
All benefits at a glance 	 One-shot technology captures all register marks at once, resulting in significant time savings and productivity increases. 	 Reduces manual intervention in the production workflow to a minimum. 	 Completely supported in Z&uuml;nd Cut Center - ZCC with algorithms that intelligently process image data in a matter of seconds. 	 Full compatibility with the ICC camera. Switching between the two systems is seamless. 	 Independent of the thickness of printed materials.   Optical Systems  	 We offer customized turnkey solutions for your Z&uuml;nd cutting system. With numerous components, from optical systems and corresponding mounting devices, to monitors for visualization and high-performance software solutions, we will put together the best digital workflow for your needs. 	 Put together a cutting solution according to your needs. Monitors, projection systems, and cameras for material detection and capture can be combined as needed.  

Zund Registration System

JC Universal Group Limited

 	 Designed for fine and ultra-fine cleaning tasks, the xtra line 2can be flexibly deployed and extended due to the modular system concept (building block system) at any time.&nbsp; 	 Different tank sizes can even be easily accommodated in one system, so that individualised systems are conceptualized.  

Elma, Xtra Line

 	 Low Energy Consumption ,Less than 150 watts 	 Low Heat Gain 	 Low Sound Level  

Fan Filter Unit

"Sanyuen" Industrial Painting Equipment’s

 	 &quot;SANYUEN&quot; Clean benches are equipment for obtaining a perfectly clean environment locally, and compared with clean rooms, which composed a whole room, have the advantage of providing a clean environment at low cost. &quot;SANYUEN&quot; Clean benches have come into general use in the electronic computer industrial and medical science, it providing excellent working conditions matched to the field of application have been developed.  

Clean Bench

Maliphant International Sales Ltd

 	 The smart electric pill crusher that protects medical professionals from toxic airborne pill dust  

SafeCrush

Kilter Electronic Institute Co., Ltd.

 	 Test range between 1&nbsp;&times; 104&nbsp;to 1999&nbsp;&times;104&nbsp;ions/cc 	 Resolution:1&nbsp;&times; 104&nbsp;ions/cc 	 Display concentration of positive and negative air ion&nbsp; 	 &nbsp; 	 Check Ion Generator 	 LCD Display: Max reading of 1999. 	 Test the textile or cloth,judge the ion&#39;s polarity and concentration&nbsp; 	 Attention :don&#39;t touch the rear square metal of the tester&nbsp; and keep your body to groundwhen testing; 	 Supplied by 2 x LR44 button size battery 	 Dimensions:78mm(L) x 27mm(W) x 9mm(H)&nbsp;  

KT-401 Mini AIR Ion Tester

Hui Tong Electronic Co.,Ltd

 	 Veton AC axial fans have the impedance protected. It have various of sizes ranging from 80 x 80 x 25mm to 220 x 220 x 60mm. It have the ball bearing and sleeve bearing. It can run on 110-120V AC, 220-240V AC and 380V AC. Special voltage could be customized. In order to meet the worldwide safety requirement. It have obtained the certificates of UL, CUL, TUV, CE, SGS and REACH. 	 Veton AC Axial Fans are made by metal frame or plastic frame. Its impeller have different appearance. We also can provide different wires and housings for it.  Fan model PDF fan model PDF: 	 80 x 80 x 25mm, 80 x 80 x 38mm 	 92 x 92 x 25mm, 92 x 92 x 38mm 	 110 x 110 x 25mm, 120 x 120 x 25mm 	 120 x 120 x 38mm, 135 x 135 x 38mm 	 150 x 150 x 50mm, 172 x 150 x 51mm 	 200 x 200 x 60mm, 220 x 220 x 60mm  

AC Fan, AC Axial Fan 

 	 Veton DC blowers have the reverse polarity protected. It have various of sizes including 5015, 5828, 6015, 7525, 7530, 9733, 12032, etc. It have the ball bearing and sleeve bearing. It can run on 5V DC, 12V DC, 24V DC or 48V DC. Special voltage could be customized. In order to meet the worldwide safety requirement. It have obtained the certificates of UL, CUL, TUV, CE, SGS and REACH. 	 Veton DC blowers have different special requirements in frame design. Special options like auto-restarting function, temperature control function, tachometer speed sensor output, lock rotor alarm output, pulse width modulation (PWM), dust proof and water resistant. We can offer all of these as you requirement.  Blower model PDF blower model PDF: 	 4020 5015 	 5828 6015 	 7525 7530 	 9733 12032  

DC Blower

Ningbo Yi Cheng Da Welding Technology Co., Ltd.

 	 Materials: Anti-static housing case, CPU controlled and transformer and operating soldering handle 	 Usage: Applications on IC soldering and desoldering 	 Material: PVC / ABS 	 Function / Selling Point: Hot air station plus soldering station combined in compact housing case 	 Power Source: Wire 	 Output (Watts): 70W 	 Input Voltage: 220V/110 	 Working Frequency (Hz): 50-60Hz 	 Power Consumption (mAh): 70W 	 Working Hours (Mins / Hours): 12 hours 	 Certification: CE, RoHS 	 Accessories: Power cord, nozzles  

2 in 1 Rework Station

United International Electrical Limited

PC53/65R-MMA Dual Ducts Spot Cooling Air Conditioner cooling power 18,000 or 22,000BTU width 540 mm depth 695 mm height 1140 mm (available in 20,000BTU A+++)   LC-01AE Supreme Spot Cooling Air Conditioner cooling power 22,000BTU (6,500W) width 630 mm depth 555 mm height 1319 mm  

Industrial & Commercial Application - spot cooling system

Shenzhen Everbest Machinery Industry Co., Ltd. (CEM)

 	 Mini Particle Counter DT-96 Particle Counter with 2.0 inch color TFT LCD display provides fast, easy and accurate readings for particle counter &amp; particle mass concentration with air temperature &amp; relative humidity measurements. 	 It is the first combination of these measurements in global, would be the best instrument for environment protection and energy save. The dew point temperature measurement will be very visible for wet and dry proof.  

Mini Particle Counter

It is suitable for industrial products thatneed to be dried by high-temperature air,such as electronics, glasses, toys, clocks,hardware,plastics, optics, etc. 

我的採購