工業機械，零件及原材料

industrial

搜羅全球頂尖工業機械，零件及原材料公司提供的工業機械，零件及原材料資訊。您可在貿發網採購平台即時諮詢可靠和專業的產品供應商，以獲取詳盡的資料及報價。

工業機械，零件及原材料供應商和製造商

Industrial Machinery, Parts & Raw Materials

原能工業有限公司

Introduction: IG541 gas fire extinguishing system is a "pure green" fire extinguishing system that uses mixed gas (nitrogen, argon, and carbon dioxide mixed in a specific ratio) as the extinguishing agent. It has the characteristics of high fire extinguishing efficiency, clean and environmentally friendly, no corrosion and no residue after fire extinguishing, and can be used in workplaces where people are often present. System introduction: Fire extinguishing principle: physical fire extinguishing. By releasing fire extinguishing agent into the protection area, the oxygen concentration is reduced to below 12.5%, and the fire is suffocated. Application areas: Solid surface fire Liquid fire Gas fire that can cut off the gas source before extinguishing Electrical fire Typical protection areas: computer room, floor mezzanine, tape library, communication exchange room, vault room, process equipment room, places where people often work or areas where people are not often but have very sensitive or non-replaceable electronic equipment. System classification: unit independent system, combined distribution system Technical Parameters: Storage pressure (20℃)15MPa20MPaMax working pressure (50℃)17.2MPa23.2MPaOperating temperature0℃~50℃Working voltage/currentDC24V, 1.4AFire extinguishing agent spraying time≤60sOperational force≤150NStartup methodAutomatic/Manual/Mechanical emergency 

IG541 gas fire extinguishing equipment

Introduction: The high-pressure carbon dioxide fire extinguishing system is mainly composed of fire extinguishing agent bottle group, driving gas bottle group, one-way valve, selection valve, driving device, manifold, connecting pipe, nozzle, signal feedback device, safety release device, weighing device, low-leakage high-sealing valve, cylinder rack, etc., with carbon dioxide as the fire extinguishing medium. System introduction: Fire Extinguishing Principle: The system utilizes asphyxiation, cooling, and insulation to suppress fires. By releasing the fire extinguishing agent, the heat absorption from liquid carbon dioxide vaporization lowers the temperature of burning materials while reducing oxygen levels in the protected area. Application Scope: • Gas fires where the gas source can be cut off before extinguishing • Liquid and liquefiable solid fires, such as paraffin and asphalt • Surface and deep-seated solid fires, including cotton, fabrics, and paper • Electrical fires Typical Protection Areas: Impregnation tanks, melting tanks, rolling mills, oil-immersed transformers, paint production lines, electrical aging rooms, coal powder silos in cement production, ship cabins, cargo holds, food warehouses, tobacco warehouses, cigarette warehouses, textile machines, and dust removal equipment. System classification: Total flooding fire extinguishing system, local application fire extinguishing system Technical Parameters: Storage pressure (20℃)5.7MPaMax working pressure (50℃)12.4MPaOperating temperature0℃~50℃Maximum filling density (kg/m³)600Total flooding spray timesurface fire: ≤1min; indepth frie:≤7minWorking voltage/currentDC24V, 1.4AStartup methodAutomatic/Manual/Mechanical emergency

High-pressure carbon dioxide gas fire extinguishing equipment

Introduction: The low-pressure carbon dioxide gas inerting device is a product developed specifically for power plants. It continuously releases CO2 to the protected area at a certain pressure and flow rate, reduces the oxygen concentration in the area, and maintains a low-oxygen environment in the area, controlling the CO2 volume fraction and temperature in the protected area within a certain range. System introduction: Fire extinguishing principle: Reduce the oxygen content in the air around the protected area or the protected object (to below 15%) to extinguish the fire by suffocation. Application scope: Gas fires that can cut off the gas source before extinguishing; Liquid fires or soluble solid fires such as paraffin and asphalt; Solid surface fires and deep-seated fires of some solids such as cotton, fabrics, and paper; Electrical fires; Raw coal bunkers, coal powder bunkers, coal mills, dust collectors, dust collectors, separators, storage boxes, coal powder filter rooms, and conveying pipelines in power plants, Cement plants. Category: Low-pressure carbon dioxide automatic fire extinguishing system, low-pressure carbon dioxide inerting protection system Technical Parameters: Operating temperature-23℃~+50℃Fire extinguishing agent storage temperature-18℃~-20℃Initial spraying time (h)1~1.2Second step spraying time (h)6.8~7System FeaturesInerting extinguishing agent releases evenly and steadily

Low-pressure carbon dioxide gas fire extinguishing equipment

Introduction: The special material fire extinguisher is a new type of efficient, green and environmentally friendly fire extinguishing equipment developed, designed and produced by our company. It can quickly extinguish A, B, D, and E fires, especially when extinguishing Class B liquid fires and Class D metal fires. The gel layer formed during fire extinguishing has a good protective effect on preventing the spillover and diffusion of harmful aerosols produced by combustion. System introduction: Composition: It is composed of cylinder, head, pressure gauge, nozzle, nozzle, special fire extinguishing agent and other components. Application range: It can be widely used in fire fighting in large places such as oil storage bases, chemical and metal processing production. Technical Parameters: Product Specifications Operating temperature Driving gas filling pressure Spray distance Effective injection time Injection residual rate Injection delay time according to user needs -35℃～50℃ 1.2 MPa ≥5 m ≥15 s ≤15% ≤5 s 

Special material fire extinguisher

Aitken, Vanson & Company, Limited

This product is mainly used in Confectionery, Chewing gum, Sports food, Nutrition food and etc. 	 DE VALUE :98% Min. 	 SOLUBILITY :6 % Max. 	 MOISTURE :4.0 - 6.0 	 PH :0.6 Max. 	 SULFATED :3000/g Max. 	 BACTERIUM :30/100gs Max. 	 COLIFORM :0.5 ppm Max 	 PB :0.5 ppm Max 	 AS : 18-20 mg/kg 	 PACKAGING : 25kgs packed in paper bag, 20&#39; FCL load 16.5MT  

Maltodextrin

JN series ﬁlter element is made of N6/N66 membrane, while all other structural materials are polypropylene, making the product ideal for the ﬁltration of alkaline feed liquid. The membrane is naturally hydrophilic and easy to wet. It features good tensile strength and toughness. Extremely low extractables do not contaminate the ﬁltered liquids. The product comes with complete validation guide documents, and each ﬁlter element has passed 100% integrity testing before leaving the factory. Structural composition: Filter membraneVilon series N6/N66 membraneSupport layer, diversion layerPolypropyleneFrame, end coverPolypropyleneCenter columnPolypropyleneConnectorPolypropylene (with support ring)Eﬀective ﬁltration area: Diameter: 70mm0.65m²/10in.Operating parameters: Positive pressure resistance≤5.5bar@25℃  ≤2.4bar@80℃  ≤0.5bar@121℃In-line sterilization121°C, 30min, 15 times, experimental conditionsAutoclaved sterilization121°C, 30min, 30 times, experimental conditionsWorking temperature≤80°CRetention performance: Precision grade*Bacterial challenge level0.22μm≥10^7 CFU/cm^2 , ATCC 191460.45μm≥10^7 CFU/cm^2 , ATCC 14756*Filter elements with precision grade of 0.1, 0.65, 0.8, 1, 3, 5μm are available Extractables: &lt;15mg/10in., 80°C hot water, 24h Application ﬁelds: Sterilizing ﬁltration of sterile APIs Sterilizing ﬁltration of ophthalmic preparations Sterilizing ﬁltration of infusion solution Sterilizing ﬁltration of buﬀer solution and reagent water Sterilizing ﬁltration of lyophilized powder injections Sterilizing ﬁltration of vaccines, biological products and blood products Sterilizing ﬁltration of ophthalmic preparationssolution Sterilizing ﬁltration of lyophilized powder injections Depyrogenation for pharmaceutical water Filtration of medical solution with high endotoxin 

JN Series, JPS  Series, JHD Series Membrane Sterilization Filter Element

This product is mainly used in Sausage, Hams, Bacons, Source and etc. 
 
ASSAY : 
 
98% Min. 
 
SPECIFIC (A) 25/D : 
 
95.5 – 98 DC 
 
PH VALUE : 
 
5.5 – 8.0 
 
CLARITY(1G/10ML ) : 
 
Clearly 
 
LOSE ON DRY : 
 
0.25% Max 
 
OXALATE TEST : 
 
Past 
 
AS : 
 
0.0003% Max 
 
PB : 
 
10mg/kg&nbsp; Max 
 
LEAD : 
 
5mg / kg Max 
 
PACKING : 
 
25kgs packed in fiber drum

Sodium Erythorbate Fcc V

Zhongke Technology Development&Promotion Center ANSO Environmental Technology and Industry Alliance

Enzyme Substrate Reagents Qualitative and quantitative detection of total coliforms, faecal coliforms(heatresistant) and Escherichia coli, with results available within 24 hours.  Features+ Used in both sterile and non-sterile environments.+ Easy use after simple training, less than 1 minute of hands-on time.+ No need media and pipette，and no glassware cleaning.+ Specific detection of coliforms, eliminating unwanted non-target organisms interference.+ Suppresses up to 2 million heterotrophic bacteria per 100mL of water sample.+ Minimum detection limit 1MPN/100mL.+ The reagents are packaged individually, each can test 100mL water samples.+ Results read time can be set to minimize evening and weekend work. Catalog No. :CDR-01 Weight:2.7g±0.5g/bag Package:100 bags/ box Shelf Life: 12 Months 

Enzyme Substrate Reagents

This product is mainly used in Milk protein, Cheese product, Butter, Creams and etc. 
 
PROTEIN (ON DRY BASIS) : 
 
90% Min. 
 
NSI : 
 
88% Min. 
 
MOISTURE : 
 
7 % Max. 
 
FAT : 
 
0.8% Max. 
 
ASH : 
 
6 % Max. 
 
FIBER : 
 
0.3% Max. 
 
TOTAL PLAT COUNT : 
 
30000/G Max. 
 
COLIFORMS : 
 
30 mpn/100g Max. 
 
PARTICULAR SIZE : 
 
95% Min. pass 100 Mesh 
 
ADDED : 
 
0.2% Soy Lecithin when product in production 
 
PACKING : 
 
20kgs Packed in Paper Bag and 20' FCL Load 12.5MT

Misp / Modified Isolate Soy Protein Non-Gmo 90% Min.

Introduction: The HFC-227ea gas fire extinguishing system is a clean, environmentally friendly, and highly efficient fire suppression solution. It leaves no residue or corrosion after extinguishing a fire, offers excellent electrical insulation, and is based on well-established technology. Product categories: • Cabinet-type (prefabricated) HFC-227ea gas fire extinguishing device • Internal storage pressure (pipe network) HFC-227ea fire extinguishing system • External storage pressure HFC-227ea fire extinguishing system System introduction: Fire extinguishing principle: It has both chemical and physical fire extinguishing effects, and has good fire extinguishing performance. Chemical fire extinguishing effect: It suppresses the development of fire by capturing free radicals and interrupting the chain reaction that causes flame propagation; Physical fire extinguishing effect: It absorbs a large amount of heat through molecular thermal motion to achieve the effect of cooling and cooling, and also has the effect of suffocating by reducing oxygen concentration. Application range: solid surface fire; liquid fire; gas fire that can cut off the gas source before extinguishing; electrical fire. Typical protection areas: data processing center, telecommunications facilities, computer room, process control center, expensive medical equipment, expensive industrial equipment, library, museum and art gallery, archives, emergency power facilities, oil-immersed transformer room, distribution room, generator room, etc. System classification: unit independent system, combined distribution system Technical Parameters: Storage pressure (20℃)2.5MPa4.2MPa5.6MPaMax working pressure (50℃)4.2MPa5.3MPa8.0MPaOperating temperature0℃~50℃Working voltage/currentDC24VFire extinguishing agent spraying time≤10SStartup methodAutomatic/Manual Automatic/Manual/Mechanical emergency Maximum filling density (kg/m³)11209501080

Heptafluoropropane gas fire extinguishing equipment

This product is mainly used in Bakery, Cakes, Animal protein, Animal nutrition and etc.

DR./MATTER (DM) :

94-96%

PROTEIN (NITROGEN X 6.25) DM :

40-48

P2O5/DM :

1.8-2.5

MINERAL MATTER/DM :

5.2-6.5

ACTIVE CELLS :

400 Million Unit/g

SALMONELLA COLI :

10&sup2;/g

PACKING :

500gs, 25Kgs packed in paper bag

Instant Active Dry Yeast

This product is mainly used in Animal nutrition, Poultry feed, Pet food, Aqua feed and etc. 
 
PROTEIN ON DRY BASIS : 
 
68% Min. 
 
MOISTURE : 
 
&nbsp;10% Min. 
 
CRUDE FAT : 
 
2.0% Max. 
 
ASH : 
 
8.0% Max. 
 
FIBER : 
 
&nbsp;6.0% Max. 
 
PH : 
 
7.5 - 8.5 
 
PACKING : 
 
20kgs packed in paper bag and 20' FCL load 12.5MT.

Concentrated Soy Protein 68% MIN. Feed Grade Non-GMO

 	 Isolated Soy Protein Non-GMO 90% Min is one of our most exported products. 	 This type of protein is served as additives in foods like: Sausage, German-sausage, Cooking ham, Protein bar, Energy bar, Chocolate bar, Nutrition drink and etc.  

Isolated Soy Protein Non-GMO

Isolated Soy Protein Non-GMO 90% Min is one of our most exported products. This type of protein is served as additives in foods like: Sausage, German-sausage, Cooking ham, Protein bar, Energy bar, Chocolate bar, Nutrition drink and etc.

PROTEIN (ON DRY BASIS) :

90% Min.

NSI :

88% Min.

MOISTURE :

7 % Max.

FAT :

0.8% Max.

ASH :

6 % Max.

FIBER :

0.3% Max.

TOTAL PLAT COUNT :

30000/G Max.

COLIFORMS :

30 mpn/100g Max.

PARTICULAR SIZE :

95% Min. pass 100 Mesh

ADDED :

0.2% Soy Lecithin when product in production

PACKING :

20kgs Packed in Paper Bag and 20&#39; FCL Load 12.5MT

This product is mainly used in Animal nutrition, Poultry feed, Pet food, Aqua feed and etc.

DIETARY FIBER :

65% Min.

CRUDE PROTEIN :

26% Max.

MOISTURE :

10% Max.

FAT :

0.6% Max.

ASH :

5.0% Max.&nbsp;&nbsp;

TOTAL PLAT COUNT :

50000 cfu/g Max.&nbsp;&nbsp;

COLIFORM :

90 mpn / 100gs Max.

PACKING :

20kgs packed in paper bag and 20&#39; FCL load 12.5MT.

&nbsp;

Dietary Soy Fiber 65% MIN. Feed Grade Non-GMO

This product is mainly used in Milk protein, Cheese product, Butter, Creams and etc.

PROTEIN (ON DRY BASIS) :

90% Min.

NSI :

88% Min.

MOISTURE :

7 % Max.

FAT :

0.8% Max.

ASH :

6 % Max.

FIBER :

0.3% Max.

TOTAL PLAT COUNT :

30000/G Max.

COLIFORMS :

30 mpn/100g Max.

PARTICULAR SIZE :

95% Min. pass 100 Mesh

ADDED :

0.2% Soy Lecithin when product in production

PACKING :

20kgs Packed in Paper Bag and 20&#39; FCL Load 12.5MT

MISP / Modified Isolate Soy Protein Non-GMO 90% MIN.

鈞曜有限公司

 	 Basic layer for waterproofing on concrete, cement board, masonry, wood dry clear and penetrative agent.  

Multipurpose Base Layer

西安琪凱機電科技有限公司

Featured here is a yarn guide hook for Benninger machinery. It is made of porcelain and flaunts long lasting durability. This yarn guide hook is easy to install and is excellent for repairs and replacement use.  Material: porcelain. Type: needle yarn guide. Use: Benninger beamer. Long lasting durability. Easy to install. Excellent for repairs and replacement use. The company is professional development, processing production, professional agents, professional sales, maintenance and debugging of textile equipment and spare parts.Development, maintenance department has professional testing equipment and professional engineers, development of various circuit board and other electrical components to undertake various circuit board maintenance and debugging. The company can undertake customer drawings and samples for processing and customization; Products are stable supply nearly hundred Chinese mainland customers, are exported to the United States, Germany, Italy, India, Indonesia, Europe, America, southeast Asia countries, such as the price of the company quality and service, have won high appreciation among our customers both at home and abroad.  Company with "weight, struggle" for the spirit, to "high starting point, high quality, high level" as the strategy, with first-class equipment, first-class technology, first-class management, organize production, make our products more perfect.  You are welcome to choose qikai electromechanical, we look forward to your cooperation.The professional supply of textile equipment is as follows:Sizing machine: SUCKER, BENNINGER,BENNINGER-ZEER, Karl mayer, TSUDAKOMA  Warping machine: BENNINGER, KarlMayerAir Jet loom: TSUDAKOMA ZA200,ZA202,ZA203,ZA205i,ZA209,ZAX,ZAX-E, ZAX-N,ZAX9100,TOYOTA JAT500,JAT600,JAT610,JAT710,JAT810,PICANOL PAT-A,DELTA,OMIN,OMNIPLUS,OMNIPLUS800;Carding machine:RIETER, TRUTZSCHLER  Air spinning:RU04,RU11,RU14,4602,4603,4604  Air compressor: Atlas, Ingersoll rand.  Tying machine: TODO, USTER, KONTEX, STAUBLI  Winder machine :SSM, CORGHI   Yarn Guide Hook      

Yarn Guide Hook for Benninger or Karl Mayer Machine

This oil pump is made of steel and is designed for Benninger beamer machines. It has a robust metallic body and has screws and screw holes for installation. The oil pump provides efficient performance and is great for using as a spare or replacement part. Material: steel.Use: Benninger beamer machine.Robust metallic body.With screws and screw holes for installation.Efficient performance.Great for using as a spare or replacement part.The company is professional development, processing production, professional agents, professional sales, maintenance and debugging of textile equipment and spare parts. Development, maintenance department has professional testing equipment and professional engineers, development of various circuit board and other electrical components to undertake various circuit board maintenance and debugging. The company can undertake customer drawings and samples for processing and customization; Products are stable supply nearly hundred Chinese mainland customers, are exported to the United States, Germany, Italy, India, Indonesia, Europe, America, southeast Asia countries, such as the price of the company quality and service, have won high appreciation among our customers both at home and abroad. Company with "weight, struggle" for the spirit, to "high starting point, high quality, high level" as the strategy, with first-class equipment, first-class technology, first-class management, organize production, make our products more perfect.You are welcome to choose qikai electromechanical, we look forward to your cooperation. The professional supply of textile equipment is as follows: Sizing machine: SUCKER, BENNINGER, BENNINGER-ZEER, KarlMayer, TSUDAKOMA Warping machine :BENNINGER, KarlMayer Air Jet loom: TSUDAKOMA ZA200,ZA202,ZA203,ZA205i,ZA209,ZAX,ZAX-E,ZAX-N,ZAX9100TOYOTA JAT500,JAT600,JAT610,JAT710,JAT810PICANOL PAT-A,DELTA,OMIN,OMNIPLUS,OMNIPLUS800Carding machine: RIETER, TRUTZSCHLERAir spinning:RU04,RU11,RU14,4602,4603,4604Air compressor: Atlas, Ingersoll rand.Tying machine: TODO, USTER, KONTEX,STAUBLIWinder machine: SSM, CORGH                                                Mainboard for Benninger machinery       

BENNINGER YARN BREAKING SENSOR FOR BENNINGER BEAMER SPARE PART 

Precision-engineered spare partcompatible with Karl Mayer sizing machines, this ATB-GR/5K/EIN6 load cell ensures accurate weight measurement for yarn sizing processes. Built with high-load capacity (5K) and EIN6 standard compliance, it withstands industrial-grade tension while maintaining measurement stability. Ideal for replacing worn components in RDPJ/HKS series machines, boosting production consistency and reducing downtime. The company is professional development, processing production, professional agents, professional sales, maintenance and debugging of textile equipment and spare parts. Development, maintenance department has professional testing equipment and professional engineers, development of various circuit board and other electrical components to undertake various circuit board maintenance and debugging. The company can undertake customer drawings and samples for processing and customization;Products are stable supply nearly hundred Chinese mainland customers, are exported to the United States, Germany, Italy, India, Indonesia, Europe, America, southeast Asia countries, such as the price of the company quality and service, have won high appreciation among our customers both at home and abroad. Company with "weight, struggle" for the spirit, to "high starting point, high quality, high level" as the strategy, with first-class equipment, first-class technology, first-class management, organize production, make our products more perfect. You are welcome to choose qikai electromechanical, we look forward to your cooperation.  The professional supply of textile equipment is as follows:  Sizing machine:SUCKER,BENNINGER,BENNINGER-ZEER, Karl mayer,TSUDAKOMA  Warping machine:BENNINGER, Karl mayer  Air Jet loom: TSUDAKOMA ZA200,ZA202,ZA203,ZA205i,ZA209,ZAX,ZAX-E ,ZAX-N,ZAX9100 TOYOTA JAT500,JAT600,JAT610,JAT710,JAT810 PICANOL PAT-A,DELTA,OMIN,OMNIPLUS,OMNIPLUS800 Carding machine:RIETER, TRUTZSCHLER Air spinning:RU04,RU11,RU14,4602,4603,4604 Air compressor:Atlas, Ingersoll rand. Tying machine:TODO,USTER,KONTEX,STAUBLI Winder machine:SSM,CORGHI 

LOAD CELLATB-GR/5K/EIN6 for Karl Mayer Sizing Textile Machinery Spare Part

Mellan Ltd

The BB coating provides the best layer for the electronic user. It increases the transparency of the base lenses, making clear visible light for indoor wearers. The coating boasts superior smudge resistance, keeping the lenses clean and making them easy to care for.
 
  Anti-static function. 
  Scratch resistant coating for exceptional durability. 
 

Indoor BB Coating

This full coating is a special coating for big size lenses. It overcomes the lens curve limits of coating color centralized on the lens surface, making the coating color fully and uniformly on the lens surface. It does not only beautify your lens, but also offers full protection to your safety, especially for ski-goggles or lens with bigger size. 	 Reliable quality. 	 Various kinds of coatings are available.  

Full Coating

We are the sole agent of Australia made waterproofing material for used in the field of Building Construction. The brand name is “SHALEX SEALIT”. There are all together five products with different usage and different solution for waterproofing project.  The products are :  1. SHALEX SEALIT Multipurpose which is a base paint that used as prima for the others products. It will penetrate into the pores of the concrete to form a stopper so that to stop water getting through. It is made of Acrylic and is an ECO product. It has passed the BS6920-2014 test and can be used in water tank and swimming pool. And in the ASTM E514/D514M it passed with grade E (excellent)  2. SHALEX SEALIT Glaze is the finish layer apply after the Multipurpose if no other cover layer is being apply to. It is quite hard when it dry so to protect the surface. It is slightly shine when dry and transparent. Able to withstand UV. It is made of Acrylic and is an ECO product. It has passed the BS6920-2014 test can be used in water tank and swimming pool.  3. SHALEX SEALIT Membrane is made of Acrylic and is an ECO product, it is a thick milky serum which is good for Dampcourse. It also act as the sealant agent for crack happened in the concrete. It is semi-transparent when dry.  4. SHALEX Stickit is made of Acrylic and is an ECO product. It is used to repair loose object such as tiles; render; small crack on wall……No need to take off the defected substrate, just used the apparatus that provided to stick whatever loose area.  5. SHALEX Waterproof It – it is made of Acrylic and is an ECO product. It is in grey color. Complies with AS4858 Class III membrane. A safe to use one component product. It is highly flexible, accommodate movement and minor cracking in substrate – over 300% elongation. Permanently flexible, excellent resistance to embrittlement. It able to withstand UV, can be used on metal surface. It has passed the test of D624, D638, D570, D882 and D412  

我的採購