汽車運輸

automobile

搜羅全球頂尖汽車運輸公司提供的汽車運輸資訊。您可在貿發網採購平台即時諮詢可靠和專業的產品供應商，以獲取詳盡的資料及報價。

汽車運輸供應商和製造商

Automobile & Transport

保迪安興盛實業有限公司

Shown here is a remote key station coming in a contemporary and delicate metallic appearance with a matte finish. It is equipped with latched or momentary dry contact for security system on/off control. Made of high quality stainless steel, this high-performance remote key station is suitable for most of the security systems.    Stainless steel face plate.    Remote key station with latched or momentary dry contact for security system on/off control.    RKS-2L and RKS-2M are universal remote key stations designed for security system ON-OFF control applications.    Built-in with connection terminals for the key switch, tamper switch and the LED lamps.    Can be used freely in most of the security systems.    The RKS-2L provides switch contact in latch.    The RKS-2M provides spring returned momentary contact.    Key switch contact rating: 50VDC / 3A maximum.    Tamper switch contact rating: 12VDC / 50mA.    Green LED with 1K Ohm series resistor.    Red LED with 1K Ohm series resistor.    Single gang US standard mounting box.    Size: 117(H) x 73(W) x 44(D) mm.    Weight: 200g.

Keyswitch

HA-268 is an auto-dialer alarm control panel with 8 hardware protection zones and 2 software zones for panic and duress alarms, which is designed for home and office protections. The system gives local alarm warnings as like the traditional alarm systems as well as sending voice message to 4 telephones of pre-set numbers when alarm occurs. The auto dialer is compatible with all the public telephone systems. The control panel comes with one control console for ready installation. Each HA-268 comes with one alarm control panel and one full feature master control console. Auxiliary control consoles can be purchased separately. Both types of consoles are back lighting and have the same function except the built-in microphone for message recording is not available on the auxiliary control console. FEATURES FOR ALARM 8 Zones, Programmable for Instant, Delay (2 delay time available), 24 Hour Instant or 24 Hour Silent Alarm ReportingProgrammable Master Code and 8 User CodesAll User Codes with Duress FunctionProtection Zones are Programmable for Single or Multiple TriggeringProgrammable Time for Exit, Entry (2 timings) and Alarm DurationArm-Disarm Control from Keypad or Remotely from Any DTMF Telephone mobile PhoneEach Protection Zone is Programmable for Response TimeExit and Entry Warning Beeps On-Off OptionsArm-Disarm Ring Back Indication On-Off OptionsInstant Arming Codes for Home and Away OperationsBuilt-in Dynamic Battery Charger and Tester with Auto or Manual Testing OptionsTwo On Board Software Zone for Panic and Duress AlarmsMaximum 4 Control Keypads Can Be ConnectedHome or Away OperationForced to Arm or Arm Prohibited OptionsHandover Option for The Instant ZonesFacilities for Driving Siren/Bell, Satellite Siren and Strobe LightPower Low Watchdog Resets SystemNon-Volatile MemoryCan be Arm-Disarmed by Conventional Key SwitchFull Feature Default Values in System for Ready Use12V / 6.5Ah Back-up Battery (Not Included)16.5VAC Operation FEATURES FOR AUTO-DIALER Four 32 Digit Telephone Numbers for Auto-DialerTwo 32 Digit Telephone Numbers for CommunicatorCommunicator Data in DTMF Format with Check-sumTone or Pulse DialingProgrammable Pause Time between Any DigitsVoice Message and Numeric Message are Possible20 Seconds Non-Volatile User Programmable Voice MessageControllable Listen-in DurationBack-up or Non-back-up Dialing for Alarm ReportingAutomatic Telephone Line Fault DetectionProgrammable Dialing Attempts, 8 MaximumProgrammable Message Repeats, 8 MaximumTelephone Numbers can be Tested Individually

Alarm Control Panel

    Protects shops, offices, residences, mobile homes &amp; boats, everybody affordable.    Two independent protection zones, instant and delay.    Home or away operation.    Built-in door chime and siren.    Facility for connecting optional remote arm-disarm switch.    Facility for connecting optional remote status indicator.    Facility for connecting door chime buttons.    End-of-line resistor supervisd, compatible with both N.C. &amp; N.O. sensors.    Fixed 60 seconds exit delay, 30 seconds entry delay &amp; 3 minutes alarm time.    Siren driver capable to drive 2 external 8 Ohm siren horns.    12VDC output wet relay contact for other alarm peripheral devices.    12-16VDC operation, 5mA low standby current.    Size: 87(H) x 120(W) x 33(D) mm.    Weight: 180 g.

Alarm Controller 

DK-2851 MK-II is a self-contained dual output relay, vandal-resistant and weatherproof Keypad. It combines the digital keypad and proximity EM card reader in one unit. DK-2851C – Dual output surface mount keypad DK-2851D –Dual output surface mount keypad with door bell output The keypad compatible with three operation modes: (1) Stand-Alone Mode – Keypad and Electric Lock (2) Multi-Station Mode – Keypad, Auxiliary Keypad and Electric Lock (3) Split-Decoded Mode – Keypad, Split Decoder and Electric Lock In these three-operation modes, split decode has the highest security protection for home and office. Features: Dual relay output for door lock and equipment controlBuilt-in real-time clock for inhibition modeOptional multi-station, split-decode for expansionDifferent levels of user modeInterlock for dual keypad installationDuress and alarm output for external deviceVisitor password programable with timeOutput relay change be toggle or time modeBuilt-in tamper switchVandal-resistant weatherproof with back-lit metal keytopSuitable installation on wall or mounting on gooseneck post

Access Control Keypad

DK-2861 MK-II is a self-contained single output relay Keypad. It combines the digital keypad and proximity EM card reader in one unit. The keypad compatible with three operation modes: (1) Stand-Alone Mode – Keypad and Electric Lock (2) Multi-Station Mode – Keypad, Auxiliary Keypad and Electric Lock (3) Split-Decoded Mode – Keypad, Split Decoder and Electric Lock In these three-operation modes, split decode has the highest security protection for home and office. Features: Single relay output for door lockBuilt-in real-time clock for inhibition modeOptional multi-station, split-decode for expansionDifferent levels of user modeVisitor password programable with timeOutput relay change be toggle or time modeBuilt-in tamper switchBack-lit touch sensing keytopSuitable installation on wall

Access Control Keypad with Card Reader

DK-9523 is a dual relay output keypad. It is a simple function keypad with easy programming method. The keypad has two operation mode, which is Single-User Mode and Multi-User Mode. DK-9523A – Two output surface mount keypad DK-9523B –Two output surface mount keypad with door bell output The keypad compatible with two operation modes: (1) Single-User Mode –Simply require only one each user code for door open. One Code Mode. (2) Multi-User Mode –Up to 100 user code for door open. The code can have length of 4-8 digits for higher security. Features: Two relay output for door lock and equipment controlOptional single or multi-user modeDifferent levels of user code modeInterlock for dual keypad installationDuress output for external deviceVisitor code programable with timeOutput relay change be toggle or time modeBuilt-in tamper switchBack-lit silicon rubber keytopSuitable installation on wallLED lighting control

Simple Access Control Keypad

Daeyoung Electric Co., Ltd.

The electronic siren functions as a sound-emitting component in alarm systems. It features a flash frequency up to 150 times. This siren is made of strong ABS material for enhanced durability.

 
  Rated voltage: 12V, DC. 
  Minimum sound pressure level: 108 &plusmn; 2dB/12VDC/30cm. 
 

Electronic Siren

BeStar Electronics Industry Co., Ltd.

The backup alarm is designed to be installed on the rear of vehicles. It provides protection from weather conditions and minimizes the chance of collision damage. This piece is assembled with quality components for reliability.
 
  Different alarms are available (white noise alarm, self adjusting alarm and general speaking alarm). 
  SPL: 82-112dB. 
  Normal rated voltage: 12/ 24V DC (AC). 
  Pulse and constant tones. 
 

Backup Alarm

森平科技有限公司

   It is specifically designed for rear view applications of commercial vehicles.   With built-in quad control box function.   Includes a 7&quot; color digital display and up to 4 CCD cameras.   DC 12/24V power in.   Independent trigger for each camera.   Single view/split view/quad view selectable.   Trigger priority CAM1&gt;CAM2&gt;CAM3&gt;CAM4.   Automatically turn on when the vehicle is placed in reverse.   Standard complete system: TD0704A monitor x 1pc + camera x 4pcs + 20m extension cable x 4pcs or TD0704A monitor x 1pc + camera x 1pc + 20m extension cable x 1pc.  

7” Rear View Camera System

Guangzhou AVC Electronics Co., Ltd

   Waterproof and weather-resistant housing for outdoor use.   Excellent night vision.   Infrared LED light: 11.   IR distance: approx. 10m.   Low power consumption: 0.72W at 12V DC without IR on (60mA at 12V DC), 1.92W at 12V DC with IR on (160mA at 12V DC).  

Vehicle CCTV Camera

   Surveillance dome for indoor applications.   Hard ceiling or suspended ceiling applications.   High resolution.   Low power consumption: 0.72W at 12V DC (60mA at 12V DC).  

Vehicle Surveillance Camera

   Waterproof and anti-vandal housing waterproof and water resistance: IP68.   Convenient angle adjustment.   Infrared LED light: 10.   IR Distance: 10m.   Low power consumption: 0.72W at 12V DC without IR on (60mA), 1.92W at 12V DC with IR on (160mA).  

Vehicle Side View/Front View Camera

   IP68 waterproof and weather resistant housing for outdoor use.   Night vision available, day/night sensor for automatic adjustment.   Mirror/normal image switch.   IR distance: 10m.   Low power consumption: 0.72W at 12V DC (60mA at 12V DC without IR on, 160mA at 12V DC with IR on).  

Vehicle Backup Camera

Josefina Pan Pacific Ltd

  This is a 1/4" CCD color camera  The resolution is 270k(N)/320k(P)  The min illumination is 0.5lux, F1.7  The water resistance is IP67  The view angle is 150 deg  

Rear-view Camera

   Waterproof and water resistance: IP67.   Super wide angle (180&deg;).   Convenient angle adjustment.   Night vision available, day/night sensor for automatic adjustment.   IR distance: approx. 10m.   Infrared LED light: 12.   Mirror/normal image switch (depending on the chips).   Low power consumption: 0.72W at 12V DC (60mA at 12V DC without IR on, 160mA at 12V DC with IR on).  

Vehicle Rear-view Camera

廣州市維視電子有限公司

CCTV CCD camera (model: DF-9803 x 3 DF-8073):
   Image type: 1/3 color Sharp CCD.   Horizontal resolution: 420TV lines.   Effective pixel: NTSC: 510 (H) x 492(V); PAL: 500 (H) x 582 (V).   Usable illumination: 0lux (built in 12pcs IR LED's for picture support in the Dark).   Free viewing angle: 130&deg;.  Outdoor CCTV camera waterproof: IP66 (DF-4103):
   Shockproof: 10G.   Video output: 1.0Vp-p 75&Omega;.   Power supply: DC 12V from reversing monitor.   Dimensions: (W) x (H) x (D) mm (without mounting).  7 inches digital screen TFT LCD color quad monitor (model: SP-737):
   7&quot; digital screen TFT LCD color quad monitor with removable sun visor.   Single view/split view/quad image view selectable.   OSD menu separately set each camera trigger priority.   OSD menu separately set each camera reversing image delay time 0-30&rdquo;.   OSD menu separately set each camera mirror/normal image.   Manual and automatic switch display mode.   1 cable solution system make it easy for users to install and use the device in any places.   Color system: PAL/NTSC (auto).   Display resolution: 2400 (H) x 480 (V) dot.   Support four camera inputs: 1.0Vp-p 75&Omega;.   Wide view angle (CR&gt;10): (up/ down): 45/65 (left/right): 65/65.   Brightness (cd/m&sup2;): 300 (automatically adjust environment by according).   Contrast ratio: 500:1.   Back-light: single LED.   Operating temperature: -20℃ to +70℃.   Storage temperature: -30℃ to +80℃.   Free operating voltage DC 11-32V (1 cable solution).   External dimensions: L x W x T (185 x 124 x 48)mm (without mounting).   Weight approx: 379g.   Product accessories: monitor bracket, 15m cable x 2, 10m cable x 2, electrical connecting cable solution, auto cigarette lighter.  

Quad Monitor Backup Camera System

Dah Jiing Ent Co Ltd

This is a CCD camera for parking. It is equipped with a 1/4 CCD image sensor for image pick-up. The power supply level is DC+12v/65mA.
    (1)NTSC: 542(H)*496(V)(pixel)=268832(pixel)  (2)PAL: 542(H)*586(V)(pixel)=317612(pixel)  

CCD Camera

Wooshin Electronics Co.,Ltd.

This rear view camera features a 1/3-inch color Sony HAD CCD chip. It is professionally engineered to deliver stable and reliable performance. There are two colors, black and white, available for customers to choose from.
 
  1/3-inch color Sony HAD CCD. 
  48dB or more. 
  Voltage: DC 12V+/-20%. 
  Power: 1W. 
  Available in different colors. 
 

我的採購