無源元件

美特(中國)有限公司

- Non-trip RCD testing method
- Test lead nulling point
- Six insulation check levels (Plus correct output check)
- Five continuity check levels (Plus correct output check)
- Two loop impedance test points plus local loop
- Five checks covering 30mA and 100mA RCD&#39;s
- Checks RCD over current test
- Test leads for resistance and insulation checks
- Calibration certificate with measured values
- Tough drop-proof watertight case
- Operating voltage : 230V (Mains supply)

Professional Calibration Check Box

LISUN ELECTRONICS (SHANGHAI) CO., LTD

Impulse Test Generator SUG-CCITT-A (Circuit 1, 10/700μS, according to Figure D.1/ Table D.1 in IEC 62368-1:2018 Annex D, Figure K.1/ Tabke K.1 in IEC 60065:2014 Annex K , and Figure N.1/ Table N.1 in IEC 60950-1:2005 Annex N). Standard:IEC 62368-1:2018“Audio/video, information and communication technology equipment – Part 1: Safety requirements”IEC 60065:2014 “Audio, video and similar electronic apparatus – Safety requirements”IEC 60950-1:2005 “Information technology equipment – Safety – Part 1: General requirements” Circuit reference 1 of Table D.1 generates 10/700 μs impulses (10 μs virtual front time, 700 μs virtual time to half value) as specified in ITU-T Recommendation K.44 to simulate lightning interference in the TELECOMMUNICATION NETWORK. Note:1. If you also need Circuit 2, 1.2/50μS, according to Figure D.1/ Table D.1 in IEC 62368-1:2018 Annex D (Or Figure K.1/ Tabke K.1 in IEC 60065:2014 Annex K , and Figure N.1/ Table N.1 in IEC 60950-1:2005 Annex N), it will beSUG255XXimuplse voltage generator2. If you also need Circuit 3, according to Figure D.2/ Table D.1 in IEC 62368-1:2018 Annex D (Or Figure N.2/Table N.1 in IEC 60950-1:2005 Annex N), it will beSUG255CXimuplse voltage generator  

Impulse Test Generator

MEMKO HONG KONG LTD

Nemko N mark certificate verifies that your product complies with Norwegian and European Safety and EMC standards. It also confirms compliance with standards of EU's Low voltage Directive (LVD) and the EMC Directive. 

 Nemko N Mark Certificate 

Nemko NRTL certification mark shows that the products complies with the safety requirements in the United States and Canada and is equal to UL, CSA, ETL and others. 

 NRTL Certification

 	 20 EU Countries, 25 certification bodies 	 Product covers: LITE &amp; Accessories, IT &amp; AV, HOUS, CONT, INST etc. Need Safety Testing only. 	 Need production audit and annual sample testing No.17 is for Nemko.  

ENEC Mark Service 

ENEC is a common safety mark for Europe which confirms that a product is in accordance with relevant European standards. It also shows compliance with the LVD safety requirement. ENEC certificaiton is a typical ISO type 5 certification, which require both annual factory inspection and annual sample testing. therefore, Most LITE and component manufacturers prefer to have ENEC certification as they can rely on the contineous compliance to the standards. Nemko is one of the main certifier for ENEC certification. 

 ENEC Mark Certification

UL安全檢定國際有限公司

 	 Product safety 	 Energy efficiency 	 Zhaga 	 Performance 	 EMC 	 Training 	 Etc  

Testing And Certification

 IECEE CB Scheme. Simplifying safety across multiple markets 

The IECEE CB (Certified Body) Scheme facilitates international trade through the mutual acceptance of product test reports and certificates.

We are one of the largest and most active CB Scheme members, issuing over 80,000 certifications in 2013, operating four National Certification Bodies (NCBs) and over 50 CB Testing Laboratories (CBTLs) around the world. 	 Global Service&nbsp;&ndash; accredited testing laboratories in all major world markets 	 Expert Leader&nbsp;&ndash; an expert participant and leading member of the IECEE CB Scheme 	 Simplified Process&nbsp;&ndash; proven benefits of one-stop access to international markets 	 Worldwide Recognition&nbsp;&ndash; test your product to all harmonized standards for target markets  Visit our website (http://www.greaterchina-ul.com/our-services/iecee-cb-scheme-certification/) for the following and more information: 	 What is CB testing? 	 CB scheme details 	 Our services  Want to know more? Just give us a call
China: +86.20.3213.1000 (South China) +86.21.6137.6300 (North China)
Hong Kong: +852.2276.9898
Taiwan: +886.2.7737.3168

IECEE CB Scheme

 Powering Progress in the Wireless Charging Testing World 

Working in close collaboration with the industry, UL is spearheading the development of wireless charging testing technologies.

As an established leader in this pioneering sector, trust us to verify that your wireless charging products are compliant, reliable and compatible for every target market. 	 Worldwide Accreditation&nbsp;&ndash; testing to the three major industry standard organizations 	 Complete Service and Certification&nbsp;&ndash; serving as a single source for the wireless industry&rsquo;s business needs 	 Industry Leading&nbsp;&ndash; active members of WPC and PMA standards development committees 	 Pioneering Expertise&nbsp;&ndash; full understanding of all relevant requirements in an emerging market  Visit our website (http://www.greaterchina-ul.com/our-services/wireless-charging-testing/) for the following and more information: 	 Importance of Wireless Charging Testing 	 Our services provided 	 Our experiences  Want to know more about our services? Just give us a call.
China: +86.20.3213.1000 (South China) +86.21.6137.6300 (North China)&nbsp;
Hong Kong: +852.2276.9898&nbsp;
Taiwan: +886.2.7737.3168&nbsp;

&nbsp;

Wireless Charging Testing

 Interoperability testing that guarantees your products perform 

Our interoperability testing helps customers worldwide to guarantee their products connect to the other devices and offer the functionality they&rsquo;re supposed to.

By testing for interoperability as well as compliance, UL can save you significant amounts of time and money in addition to protecting your brand&rsquo;s reputation. 	 Global Reach&nbsp;&ndash; testing and certification in all country markets 	 Real world testing&nbsp;&ndash; test products as they will be used on the open market 	 Tailored Testing Solutions&nbsp;&ndash; years of experience in creating bespoke test plans 	 One-Stop Service&nbsp;&ndash; the complete range of all-in-one testing solutions  Visit our website (http://www.greaterchina-ul.com/our-services/interoperability-testing/) for the following and more information: 	 Importance of Interoperability testing 	 &quot;One-stop Service&quot; we offer  Want to know more? Just give us a call
China: +86.20.3213.1000 (South China) +86.21.6137.6300 (North China)
Hong Kong: +852.2276.9898
Taiwan: +886.2.7737.3168

Interoperability Testing

 The Global one-stop EMC testing service 

Our understanding of new technologies, involvement in standards organizations worldwide, and experience across numerous industries allow us to provide unrivaled levels of EMC Testing expertise.

We&rsquo;re here to help you to comply with EMC requirements, attain the certifications you need, and get your products to market as quickly and smoothly as possible on a worldwide level. 	 Global Reach &ndash; testing and certification in all markets 	 Pre-certification testing and debugging &ndash; to spot potential compliance and performance problems as early as possible 	 Tailored Testing Solutions &ndash; enhanced process efficiency and streamlined testing cycles 	 Rapid and Responsive &ndash; 24/7 flexible working helps you to meet the tightest deadlines  Visit our website (http://www.greaterchina-ul.com/our-services/emc-testing-service/) for the following and more information: 	 Importance of EMC Testing 	 Our Accreditation 	 Services we provide  Want to know more about the service we offer? Just give us a call.
China: +86.20.3213.1000 (South China) +86.21.6137.6300 (North China)
Hong Kong: +852.2276.9898
Taiwan: +886.2.7737.3168
&nbsp;

EMC Testing Servie

Our core performance offerings include energy efficiency testing and certification, photometric and photobiological testing, IP/IK testing, vibration and package testing. UL provides a suite of reports for specific industry applications in horticultural lighting, UVC germicidal lighting, photovoltaic lighting, and more. UL has capabilities for common tests like operating frequency, dimming level, temperature, color, and flicker - but we also offer turnkey solutions to prepare the testing, scope, and documentation you need for submission for Energy Star®, the DesignLights Consortium® Qualified Products List (QPL), and other organizations important for entry into the North American market. Contact us for testing but also for one-stop service to get your certification moving quickly and easily.   

Performance Testing

ABO ELECTRONICS (SHENZHEN) CO LTD

100W~4000W Service Scope ODM: Include Mechanical design, PCB Layout, Firmware development, APP development and OS development services. OEM: Include component sourcing and procurement, PCB Fabrication, PCB Assembly, Build of Box Assembly, Function Testing, Aging Testing, Packing and Logistic Services. DFM(Design For Manufacturing): Feed back customer of circuit layout optimization and component performance optimization requirements. DFP(Design For Purchasing): Recommend price competitive equivalent or better quality equivalent components. DFT(Design For Testing): Recommend price competitive testing solution for “high mix, low volume” projects or ATE(Auto-Testing-Equipment) solution for big volume projects.  Product Testing&amp; InspectionTest Development Services In-circuit Test Function Test Flying Probe Burn In &amp; Environment Stress Screening AOI Test Automated Test Platform Solutions X-Ray inspection PCBA ProductionLow Volume / High Mix Production High-Volume Production Customized Fulfillment Planning &amp; Options Total Quality ManagementISO 9001:2015Certified ISO 13485:2016Certified RoHS Compliant Compliant to IPC-A-610 Workmanship Standards UL, CE/FCC, CSAetcCertification Support Supply Chain ManagementDomestic &amp; International Sourcing Long-Term Collaborative Supplier Relationships Inventory Management Systems Strict Counterfeit Prevention Policy Kanban Manufacturing Programs 

Portable Power Station

EI Testing Account (0823)

internal testing - submit approval approval for an "approved + offline product"  

testing product pending for approval - EI testing

深圳市計量質量檢測研究院

The Electronic and electrical product testing is carried by&nbsp;professional engineers and with advanced inspection equipment.&nbsp;It includes safety and performance tests for various electronic and electrical products to ensure&nbsp;product compliance with national standard. Technical supports and testing services are also&nbsp;available&nbsp;for EMC.
 
  Equipped with the most advanced test equipment and facilities. 
  Available in other services. 
 

Electronic and Electrical Product Testing

CNTAC (Quanzhou) Testing Technology Service Co., Ltd.

 	 TV As a common household appliances, product safe and integrity is top priority demand, each import countries enact law and regulations to protect human being have safety products. 	 How to make sure your TV product meet your standard and specification? Find a qualify 3rd party inspection company is a wise way. 	 When you importing from supplier or factories, you are already aware of all challenges to be faced: unskilled labor, supply chain, supplier reliability, uncertified components, container loading- 	 To limit this risk we--IQS provide complete QC inspection solutions: Pre-Production, During Production, Initial material check, through to Container Loading Inspections &amp; Sampling. 	 In addition to this, we work closely in monitoring factories with our Factory Evaluations and Social &amp; Factory Audits. 	 With us the defects will show you clearly. 	 You are in good hands: With IQS, manufacturing and sourcing in Asia has never been safer!  

TV quality safe control in Asia countries

廣州環宇標準及檢測技術有限公司

 	 According to EU RoHS 2.0 or China RoHS2.0&nbsp; 	 Conduct testing to below restricted substances: 	 Limit：Pb，Hg，Cr6+ 1000ppm 	 Limit：Cd 100ppm 	 Limit：PBBs, PBDE 1000ppm 	 Limit：DEHP，DBP，BBP，DIBP 1000ppm  

我的採購

確定要取消關注此供應商？

確定要取消關注此供應商？