家居用品，燈飾及建築

搜羅全球頂尖家居用品，燈飾及建築公司提供的家居用品，燈飾及建築資訊。您可在貿發網採購平台即時諮詢可靠和專業的產品供應商，以獲取詳盡的資料及報價。

家居用品，燈飾及建築供應商和製造商

Home Products, Lights & Constructions

燈飾

搜羅全球頂尖燈飾公司提供的燈飾資訊。您可在貿發網採購平台即時諮詢可靠和專業的產品供應商，以獲取詳盡的資料及報價。

燈飾供應商和製造商

Lights

照明配件及零件

home

搜羅全球頂尖照明配件及零件公司提供的照明配件及零件資訊。您可在貿發網採購平台即時諮詢可靠和專業的產品供應商，以獲取詳盡的資料及報價。

照明配件及零件供應商和製造商

Lighting Accessories & Parts

LISUN ELECTRONICS (SHANGHAI) CO., LTD

Impulse Voltage Generators | Impulse Generators | Impulse Withstand Voltage Tester |High VoltageSurge Generator is according to IEC255-5,GB-14711 , GB/T-14598.3, IS-13252-1, IEC60060,IEC60065,GBT17215.301 andGBT17215.322. The insulation performance test is suitable for all kinds of electrical and electronic products (such as energy meter, household appliances, low voltage electrical appliances and small power motors). Standard:IEC255-5 “Relays – Insulation tests”IS-13252-1 “Information technology equipment — Safety Part 1 General requirements”IEC60060 “IEC 60060-1-2010 High-voltage test techniques – Part 1 General definitions and test requirements”IEC60065 ” Audio, video and similar electronic apparatus – Safety-requirements”IEC 60255-5:2000/GB/T-14598.3″Electrical relays – Part 25: Electromagnetic emission tests for measuring relays and protection equipment”GB/T-3048.8 “Test methods for determining electrical properties of electric cables and wires.A.C. voltage tests” LISUN ModelSUG255LXSUG255MXSUG255PXSUG255PX-20KVSUG255PX-25KVSUG255PX-30KVRange of Output Voltage0～12kV0～20kV0～25kV0～30kVImpedance of Generator12Ω and 500Ω38Ω and 500Ω2Ω and 500ΩVoltage Output Waveform1.2 / 50μsPolarity of Output VoltagePositive and NegativeOperation ModeManually and AutomaticTest Repetition1～9999Interval Time3～9999s

Impulse Voltage Generators | Impulse Generators IEC255-5, IEC60065

The EDX-2 series energy scattered X-ray fluorescent spectrometer is realized by analyzing the element characteristic X-ray wavelength and strength of the element emitted by the sample. The elements contained in the sample are determined according to the different elements characteristics of the X -ray wavelength, and the content of the element in the sample can be determined by comparing the strength of the different elemental spectrum. SpecificationEDX-2AEDX-2ACEDX-2ABEDX-2ABCEDX-2TTypeNon -pumping air desktopVacuum desktopWeight50KG55KGTest time200S100SSample cavity size610*320*100mm (L*W*H)510*310*120mm（Non -vacuum）Ф100*70mm（vacuum）Test environmentatmosphereVacuumDetectorSi-pinSDDResolution149 Electronic Volt129 Electronic VoltOutput tube pressure, current50KV/600uA（Can automatically set）50KV/600uA（Can automatically set）Test sample typeSolid, liquid, powderNon -vacuum: solid, liquid, powderPumping vacuum: solidContent analysis range2ppm–99.99%2ppm–99.99%Test itemsTypic Application 1：RoHSTypic Application 1：RoHSTypic Application 1：RoHSTypic Application 1：RoHSTypic Application 1：RoHSTypic Application 3:Coating and Plating ThicknessTypical application 2:alloy analysisTypical application 2:alloy analysisTypical application 2:alloy analysisTypic Application 3:Coating and Plating ThicknessTypic Application 3:Coating and Plating ThicknessMetal test element rangeCan not testAll elements in thePeriodic Table of Elements from 16-S to 92-U are available for alloy analysis (iron, copper, stainless steel,Au (gold),Pt (platinum) , etc)All elements in thePeriodic Table of Elements from 11-Na to 92-U are available for alloy analysis (magnesium aluminum alloy, ore component, iron, copper, stainless steel,Au (gold),Pt (platinum) , etc)Typic Application 1（LISUN Model：EDX-2A、EDX-2AB、EDX-2AC、EDX-2ABC、EDX-2T）: Restriction of Hazardous Substances (RoHS) 1.0 Directive Testing for electronic and electrical products, components, plastics and plastic parts. Click here to download the ROHS 1.0 test report sample. The main test substances in RoHS requirements are as follows: Limit substance Limit content Hg 1000ppm CrVI 1000ppm Cd 100ppm Pb 1000ppm PBBs 1000ppm PBDEs 1000ppm 

RoHS Testing Equipment – Element Analysis – Thickness Gauge (EDXRF)

The electromagnetic interference generated during the normal operation of a vehicle can enter the power and signal lines of onboard electronic devices through conduction and coupling, leading to reduced functionality, temporary malfunctions, or even damage. The EMS-ISO 7637 Multifunctional Immunity Test System For Automotive Electronics simulates various typical electromagnetic disturbances produced during vehicle operation, while also replicating the changes in the vehicle’s power supply under conditions such as engine startup, switching of electronic devices, and battery charging/discharging. The waveforms generated by the EMS-ISO 7637 system comply with the immunity testing requirements of most automotive manufacturers for onboard electronics. Standard:ISO7637-2 “Road Vehicles – Conductive Coupling Electrical Interference – Part 2 Electrical Transient Conductivity Tests for Power Lines“ISO7637-1 (GB-T21437.2 )”Road vehicles – Electrical disturbances from conduction and coupling – Part 1: Definitions and general considerations” Technical Characteristics:• Operation Interface: It features a large LCD color display and adopts a main module expansion architecture, offering a high level of intelligence. The system is user-friendly and facilitates easy operation, as well as future upgrades and updates.• Designed for 12V/24V automotive electronic immunity test.• Tested Product Capacity: DC 80V/100A, unified port output.• Built-in various host interfaces and it can work with LISUN software on a PC.• The software includes all relevant standards, and customers can also add or update the standards. System Configuration:Note: Please click here to download the EMS-ISO7637 System Brochure and EMS-ISO7637 and LISN200 CNAS Calibrate Certificate to learn more. Product NameLISUN ModelSpecificationMultifunctional Immunity Test instrument HostLIS-7600Mainly responsible for parameter configuration and status control of various waveform modules, and can be connected to a computer to enable upper-level control.P1/2a SimulatorLIS-7610Pulse 1 &amp; Pulse 2aP2b/4 SimulatorLIS-7620Pulse 2b &amp; Pulse 4P3 SimulatorLIS-7630Pulse 3a &amp; Pulse 3bP5a/5b SimulatorLIS-7650Pulse 5a &amp; Pulse 5bArtificial NetworkLISN200Transient conducted emission EMI test, in conjunction with the TES200N as an integrated unit.SwitchTES200NTransient conducted emission EMI test, integrated with the LISN200 as a single unit.Capacitive Coupling Clamp (CCC)(Optional)VFTCISO 7637-3 testing, automotive electronic interference test.Current Injection Probe(Optional)F-120-6AISO 7637-3 Inductive Coupling Probe (ICC) testing, specifically for slow pulse ISO 7637-3 testing.

Multifunctional Immunity Test System For Automotive Electronics

Temperature Humidity Chamber | Thermal Chamber | Climate Chamber simulate different climatic conditions, such as heat-endurance, cold endurance, dryness-endurance and humidity-endurance which defines the performance of material. By testing the product under different climatic conditions to see whether its performance can meet the intended requirements. It is widely used to test the CFL/LED, electricity products, automative cars, home appications and mobiles. This series of aging test chamber is suitable for the reliability test of industrial products. It has the characteristics of temperature and humidity control precision and wide control range. Standard:IEC60068-2-1 ” Environmental testing – Part 2-1: Tests – Test A: Cold”IEC60068-2-2 “Environmental testing – Part 2-2: Tests – Test B: Dry heat”IEC60068-2-78 “Environmental testing – Part 2-78: Tests – Test Cab: Damp heat, steady state”IEC60598-1 “Luminaires – Part 1: General requirements and tests”IES LM-80-08 “Approved Method: Measuring Lumen Maintenance of LED Light “GB/T2423.17 “Environmental testing for electric and electronic products – Part 2: Test method – Test Ka: Salt mist”GB/T5170.2 “Inspection methods for environmental testing equipment for electric and electronic products — Temperature testing equipment”GB/T5170.5 “Inspection methods for environmental testing equipments for electric and electronic products―Part 5:Damp heat testing equipments” What is a Climate Chamber?Climate chamber is used to simulate a temperature environmental condistions. It may also be called environmental chambers or thermal chamber or temperature chamber. You can click the below videos to learn the details and also how to operate it. Specification:• The temperature humidity test chamber is made of SUS304 Steel. The thermal insulation layer is made of polyurethane hard foam ultra-fine glass fiber. The heat-insulated doorframe uses high temperature aging silicone rubber sealing strip.• The temperature controller of the climate chamber includes Korean TEMI display in English/Chinese and German Siemens PLC. It can communicate with PC via RS-232. The temperature accuracy is 0.1℃ and humidity accuracy is 0.1%R.H.• The temperature sensor is platinum PT100Ω/MV.• The independant heating system uses nickel-chrome electric heater.• The refrigerating system is fully enclosed air-cooled single-stage compression refrigeration mode, and the compressor is from France TECUMSEH brand which can allow you get after sales support from many other countries.• The circulation system uses temperature resistant and low noise air-conditioned motor and multi-blade centrifugal wind wheel.• The safety protection system includes electric leakage, short circuit, over temperature, motor overheating, compressor pressure, overload, over-current protection.• Working Voltage: AC380V±10% 3 phases and frequency 50Hz/60Hz• Working Environmental: Temperature 5℃～+30℃ and Humidity ≤85%R.H  

Temperature Humidity Chamber | Thermal Chamber

The ZY-3 Needle Flamp Test apparatus is mainly used for testing lighting equipment, low-voltage electrical appliances, household appliances, power tools, electronic instruments, electronic meters, etc. Additionally, this instrument is also suitable for testing insulation materials, engineering plastics, and solid flammable materials. The needle flame test apparatus consists of a needle flame burner, a working chamber, and a temperature measuring device. The needle flame test apparatus utilizes a needle-shaped burner with a specified size (Φ0.9mm) and is fueled by a specific gas (butane or propane). The burner is oriented at a angle of 45° and ignited for a predetermined time onto the test specimen, evaluating the ignition hazard of small flames caused by internal fault conditions of the equipment based on whether the test specimen and the ignition pad ignite, the duration of combustion, and the length of the flame. Standard:IEC 60695-2-2:2021 “Fire hazard testing – Part 2: Test methods – Section 2: Needle-flame test”IEC 60695-11-5:2016 “Fire hazard testing – Part 11-5: Test flames – Needle-flame test method – Apparatus, confirmatory test arrangement and guidance”IEC 62368-1:2023 “Audio/video, information and communication technology equipment – Part 1: Safety requirements” Specification:• Angle of burner: 45° (when in test) / 0° (when adjust the flame’s height)• Needle flame burning time: 0~999.9s±0.1s (adjustable, 30s in general)• After-flame time: 0~999.9s±0.1s, auto record and pause manually• Height of flame: 12mm±1mm• Gas: 95% butane (Note: Digital flow meter is optional with extra cost)•Test range of temperature: 0~1000℃• The temperature rises from 100℃±2℃ to 700℃±3℃ within 23.5 seconds±1s• Thermocouple: Φ0.5mm K type• Applied with touch screen and remote control• Number of burns for a single test: single or multiple burns can be set LISUN ZY-3 needle flame tester can run multiple times flame test in a single test automatically according to the Annex S S.1 of the IEC62368-1 standard: 

Needle Flame Test

The ZRS-3H Glow-wire Test Apparatus is used to test the flammability of plastic sheets or other insulating materials. The specimen is exposed to a high temperature glow wire (nickel/chrome wire) through a standard test procedure. It is used to identify whether the insulating material does not reach a certain temperature or ignite to prevent fire hazards around it. What is glow wire test?The Glow wire tester ZRS-3H/ZRS-3HS is mainly used to test the ignition performance, ignition temperature, flammability and flammability index of lighting equipment, electronic products and household appliances. The equipment adopts high-temperature sprayed steel structure and imported instrument display, which is easy to operate and has stable test performance. This equipment is mainly used for flame retardancy testing by QC departments and related enterprises. Standard:IEC 60695-2-1:2021(VDE0471:2019) “Fire hazard testing – Part 2: Test methods – Section 1/sheet 1: Glow-wire end-product test and guidance”IEC 60695-2-11:2021(GB/T5169.10-2006)”Fire hazard testing – Part 2-11: Glowing/hot-wire based test methods – Glow-wire flammability test method for end products (GWEPT)”IEC60695-2-10:2000 “Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure”IEC 60695-2-12:2021 “Fire hazard testing – Part 2-12: Glowing/hot-wire based test methods – Glow-wire flammability index (GWFI) test method for materials”IEC 60695-2-13:2000 “Fire hazard testing – Part 2-13: Glowing/hot-wire based test methods – Glow-wire ignition temperature (GWIT) test method for materials”IEC 60335:2023 “Household and similar electrical appliances – Safety – Part 1: General requirements”UL 746A:2021 “Standard for Polymeric Materials – Short Term Property Evaluations”IEC 829 Specification:• Heating temperature: adjustable continuously within the range of 25~1100°C, the accuracy of temperature is 3°C, the resolution of temperature is ±1°C• Glow-wire time: 0.1-999.9s，±0.1s(time range is adjustable)• Ignition time: 0.1-999.9s (auto record, manual pause)• Flame-out time: 0.1-999.9s (auto record, manual pause)• Glow wire pressure on test specimen: 0.95±0.1N. Limiting pressure depth is 7mm.• Glow wire: φ4 nickel (80％) and chromium (20％). Made in specific dimensions.• Thermocouple: φ1 armored nickel-chromium/nickel-aluminum wire, K Type.• Automatic departure: While reaching specified glowing time, test specimen will depart from glow wire automatically. 

Glow-wire Test Apparatus

Dongguan Deson Insulated Materials CO.,LTD

Description: FR4 Epoxy Fiberglass Laminate Sheet is made of electrical-purposed, alkali-free glass cloth impregnated with epoxy resin by hot pressing. It has good mechanical and dielectrical properties. Applicable to mechanical, electrical, electronic, electrical, and other fields. It is also used in the processing of insulating parts and processed into all kinds of insulating parts and equipment insulating structural parts, which can be used in wet environment conditions and transformer oil.  FR stands for flame retardant and denotes that the safety of flammability of FR4 is in compliance with the standard UL94V-0. The FR4 epoxy laminate has a smooth surface, no air bubbles, and no pits or wrinkles, but it allows for other defects that do not affect its use, such as scratches, indentations, stains, and small spots. The edges should be cut neatly, and the end faces must be free of delamination and cracks.  Features: 1. High mechanical performance under medium temperature. 2. Good electrical performance stability under high temperature. 3. Resist to acid and alkali. 4. Corrosion resistance.  Applications: Widely used plastics in the electronics field, primarily because water absorption is virtually nil, rendering it an outstanding insulator. 

Epoxy board

Impulse Test Generator SUG-CCITT-A (Circuit 1, 10/700μS, according to Figure D.1/ Table D.1 in IEC 62368-1:2018 Annex D, Figure K.1/ Tabke K.1 in IEC 60065:2014 Annex K , and Figure N.1/ Table N.1 in IEC 60950-1:2005 Annex N). Standard:IEC 62368-1:2018“Audio/video, information and communication technology equipment – Part 1: Safety requirements”IEC 60065:2014 “Audio, video and similar electronic apparatus – Safety requirements”IEC 60950-1:2005 “Information technology equipment – Safety – Part 1: General requirements” Circuit reference 1 of Table D.1 generates 10/700 μs impulses (10 μs virtual front time, 700 μs virtual time to half value) as specified in ITU-T Recommendation K.44 to simulate lightning interference in the TELECOMMUNICATION NETWORK. Note:1. If you also need Circuit 2, 1.2/50μS, according to Figure D.1/ Table D.1 in IEC 62368-1:2018 Annex D (Or Figure K.1/ Tabke K.1 in IEC 60065:2014 Annex K , and Figure N.1/ Table N.1 in IEC 60950-1:2005 Annex N), it will beSUG255XXimuplse voltage generator2. If you also need Circuit 3, according to Figure D.2/ Table D.1 in IEC 62368-1:2018 Annex D (Or Figure N.2/Table N.1 in IEC 60950-1:2005 Annex N), it will beSUG255CXimuplse voltage generator  

Impulse Test Generator

Salt Spray Test Chamber | Salt Fog Test | ASTM B117 Salt Spray ChamberSalt Spray Test Chamber is applicable to the salt spray corrosive test for the protection layer of components, parts, electronic and electrical parts and metal materials and industrial products. Salt spray test chamber is to assess the corrsion resistance of materials and coatings. This type of test is important for various industries to ensure the durability and reliability of products, especially those exposed to harsh environmental conditions, such as marine environmentals, automotives settings, or industrial applications. Specification: LISUN ModelYWX/Q-150YWX/Q-250YWX/Q-750YWX/Q-010YWX/Q-016YWX/Q-020Working room size 600*450*400900*600*5001100*750*5001200*800*5001600*1000*6002000*1000*600External dimensions1100*670*10501410*900*10501600*1050*12001700*1150*12002300*1250*14502800*1350*1450Capacity108L270L412L480L960L1200LSolution tank volume 15L25L30L32L40L45LWorking powerSingle -phase AC 220V/50Hz (60Hz available)Three -phase AC 380V/50Hz (60Hz available)1.5KW2.0KW2.5KW2.5KW5.0KW6.0KWSample space available 500*300*250800*450*250900*600*3001000*600*3001400*800*3501800*800*350Opening MethodManual controlManual controlManual controlStainless steel air spring supportCylinder supportCylinder supportWorking temperatureRoom temperature ~+55 ℃The temperature range of saturated barrelRoom temperature ~+70 ° C (Heating and filtering compressed air to reduce nozzle crystallization)Temperature performanceTemperature uniformity: ≤2 ℃   Temperature volatility: ≤ ± 0.5 ℃Salt spray deposition rate1-2ml/80cmm/h (take average of 16-hour test )Spray methodContinuous, intermittent, programmable testTest typeNeutral test (NSS), acid test (AASS), copper acceleration salt fog test (CASS)Safety protection mechanismLow water level alarm, over-temperature alarm (mechanical over-temperature protection + electronic over-temperature protection dual over-temperature protection), low air pressure alarmRequirements for air compressorsPrepared by the customer: air inlet pressure 0.4Mp or above, two-stage pressure regulation, spray pressure 0.07~0.17Mp (adjustable)Sample rackOne set of V -shaped grooves and O -type round sticks (combined with an angle of 20 ° ± 5 °). Special sample racks can be ustomized, and the load-bearing capacity is configured according to actual conditions.Standard accessories1 set of V -type/O -type sample racks, 2 bottles of sodium chloride (500g/bottle), 1 plastic rust -proof barrel (5L), 1 nozzleWorking environment requirementsThe ambient temperature is 5℃~30℃. Ventilation is recommended. When the temperature exceeds 30℃, it is recommended to adjust the room temperature through appropriate methods. The ambient humidity is below 80%Rh.

Salt Spray Test | Salt Spray Test Chamber

The JL-X includes the following water proof IP codes: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 ofIEC 60529). It is widely used in the authentication test organization for the products such as electrical &amp; electronic products, LED luminaires as well as in the relevant quality control department for the waterproof detection of the enclosures protection grades. Standard:IEC 60529:1989 +A1:1999 +A2：2013 “Degrees of protection provided by enclosures(IP Code)”IEC 60598 “Luminaires – Part 1: General requirements and tests”IEC 60335 “Household and similar electrical appliances – Safety – Part 1: General requirements”IEC 60034-5 “Rotating electrical machines – Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) – Classification”GB 7000.1 “Luminaires-Part 1：General requirements and tests” The whole JL-X waterproof test system includes:• Drip Box (JL-12): The drip box meets the test requirements of IPX1 and IPX2 in Clause 14.2.1-14.2.2 and Figure 3 of IEC 60529:1989 +A1:1999 +A2：2013. The drip box size is 800x800x45mm (LxWxH). The diameter of drip hole is 0.4mm. The distance between drip holes is 20mm. It can test samples over 150kg. •Swing Pipe Water Spray Test Equipment (JL-34):It meets the test requirements of IPX3 and IPX4 in Clause 14.2.3-14.2.4 and Figure 4 ofIEC 60529:1989 +A1:1999 +A2：2013. The radius of oscillating tube is 1meter (Any other size is also available). The internal diameter of the tube is 15mm. The sample turntable diameter is 1000mm (Other sizes are optional according to the diameter of the oscillating tube), and the height is adjustable. It includes a water tank. The rotation speed is 1~5rpm which can be set and controlled by PLC panel. • Spraying Nozzle and Splashing Water Hand held Test Device (JL-34S):It meets the test requirements of IPX3 and IPX4 in Clause 14.2.3-14.2.4 and Figure 5 ofIEC 60529:1989 +A1:1999 +A2：2013• Water pressure regulation requirement: The water pressure is adjusted to achieve the specified flow rate, and the required pressure range is 50 kPa to 150 kPa.• Test duration requirement: The test duration is 1 minute per square meter of the calculated surface area of the shell (excluding any mounting surface), and the minimum test time is 5 minutes.• The JL-34S includes the following: a pressure gauge, an 8m long water pipe and a Sprinkler with a 5mm Spray Nozzel. • Waterproof Jet Test Device (JL-56): It meets the test requirements of IPX5 and IPX6 in Clause 14.2.5-14.2.6 and Figure 6 of IEC 60529:1989 +A1:1999 +A2：2013. With a 780*580*1100mm size water tank, the nozzle diameter is ф6.3mm (IPX5 waterproof test ) and ф12.5mm (IPX6 waterproof test). The water flow is 12.5 ±0.625L/min for IPX5 and 100 ±5L/min for IPX6  

IP Waterproof Test Equipments

PFM61000-8A Magnetic Field Generator is high reliability test equipment with stable performance. It is especially designed for measuring immunity characteristics of electrical and electronic products and requirements of normal frequency magnetic field. It provides an accurate basis for the equipment under test (EUT) in the immunity test of normal frequency magnetic field. The generator can imitate the magnetic field environment such as residential, commercial, industrial and mining enterprises, power plants, as well as middle and high substation. Standard：IEC61000-4-8/ GB/T17626.8 “Electromagnetic compatibility (EMC) – Part 4-8: Testing and measurement techniques – Power frequency magnetic field immunity tes”Specification:• LCD display, built-in computer for control, easy to operate.•Freely set the time of current injection and interval, and the time of test.• Intelligently acquire current, voltage and magnetic field strength, all the parameters shown on the LCD display.• Magnetic field coil: 1 square meter (other sizes can be customized)•Magnetic field strength: 0A / m ~ 1000A / m continuously adjustable•Output Current: AC•The time of test: 999 times• Test interval: 1 ~ 99min•Current injection time: 1s to 99min•Current distortion rate: &lt;5%•Work mode (current range for continuous working): 1A ~ 100A•Work mode (current range for short-time working): &gt;100A ~ 500A, 1 ~ 5s, &gt;500A ~ 1000A, 1 ~ 3s•Methods of operation: manual, semi-automatic, automatic•Power supply: AC220V 50/60Hz• Working environment temperature: 15°C-35°C 

Magnetic Field Generator

SC-015Dust-proof Test Chamber(Sand Dust Chamber) is applied to physical and other related performance tests for electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts and other products under simulated dust climate conditions. Verify whether the performance of the product meets the requirements through verification after the measurement, so as to facilitate the design, improvement, verification and factory inspection of the product. The dust test chamber is applicable to the IP5X and IP6X dustproof test. Standard:IEC 60529:1989 +A1:1999 +A2: 2013 (GB/T 4208) “Degrees of protection provided by enclosures (IP Code)”IEC 60598-1 (GB/T 7000.1) “Luminaires – Part 1: General requirements and tests”IEC 60068-2-68 (GB/T 2423.37) “Environmental testing – Part 2-68: Tests – Test L: Dust and sand”GB/T 4942.2 “Degrees of protection provided By enclosures for low-voltage apparatus”DIN40050 “Road vehicles — Degrees of protection (IP code)” Specification:• Temperature range: RT+10~50℃• Standard wire diameter of metal screen: 50um; Standard spacing between wires: 75um• Test dust: dry talc powder; Talc powder dosage: 2~4kg/m; Dust drop method: free falling• Total test time: 0~999H (adjustable); vibration time: 0~999H (adjustable); time accuracy: ±1 second• Vacuum: 0~10Kpa (adjustable); Pumping speed: 0~4800L/H (adjustable)• Sample (EUT) power connection: Refer to the rated input of the sample, but the current can’t be greater than 10A• Safety protection function: leakage protection, short-circuit protection• The shell is made of domestic high-quality steel plate, and the surface is sprayed with paint, which is beautiful and durable.• The inner chamber, sample rack, etc. are made of stainless steel plates to ensure that they will not rust for a long time.• There is a transparent observation window (toughened glass) on the door, and an LED lighting lamp is installed in the chamber to facilitate the observation of the internal test situation.• There is a device for replacing dust at the bottom of the chamber, which can easily 100% replace the used dust.• A vibration device is installed to ensure that the dust does not stick to the wall and condense. The working time of the device is adjustable, and it can work automatically and alternately.• There is a suction pipe in the chamber, which can complete the vacuum action on the sample (sample should reserve the suction hole position). • Dust chamber testing control system: 7-inch touch screen + Panasonic PLC. The dust blower, dust vibration and total test time can be controlled separately. This controller has the following various arbitrary setting control functions:1. Dust blowing time (stop, blowing): can arbitrarily choose any of continuous and periodic dust blowing time to setting;2. Vibration time: vibration and stop vibration time are automatically alternated;  

Dustproof Testing Machine | Dust Proof Chamber

深圳市金流明光電技術有限公司

 LEDGEAR&reg; LED Drivers&nbsp;covers all indoor lighting.  	 Dimming Options: DALI-2, DALI DT8, Push-DIM, Bluetooth, Zigbee, Wifi, 0-10V, Triac, ON/OFF 	 Dimming Mode: AM, or AM+PWM 	 Driver Type: indepent with looping function, or built-in 	 Output channel: 1 channel, 2 channel(for tunable white) 	 Output current: 120mA to 2500mA 	 Output voltage: 4V to 150V 	 CLO, NTC, ELO functions programmable by NFC, or DALI 	 Both Constant current and constant voltage 	 AUX output for lighting sensors  

LEDGEAR LED Drivers: DALI 2, Push-DIM, Bluetooth, Zigbee, Wifi, 0-10V, Triac, ON/OFF

Antron Electronics Co., Ltd.

The circular lamp is a kind of circular lighting fixture. The biggest advantage is that it can illuminate the subject brightly. Due to the wide range of light irradiation, it can be used indoors and outdoors. With our circular series fluorescent ballast, the circular lamp works better. Various Starting Methods of Antron’s Circular Series Fluorescent BallastAntron circular series fluorescent ballast has two kinds of different starting method, they are modified rapid start and program start. Antron provides series of ballasts for circular lamps, from 22W to 55W, with different starting method、case size and the number of lamp. We believe you can find a suitable ballast power supply to match your lighting products. Why Choosing Antron’s Fluorescent Ballast Circular SeriesThe circular lamp with an matched electronic ballast can prolong its life. Because the electronic ballast can output high-frequency、stable power and voltage to the lamp, it can reduce the temperature of the lamp and delay the blackhead phenomenon of the lamp , so the damage to the lamp is small. In addition, due to stable power supply and voltage, it has a better protection circuit design, and the light wave flickering phenomenon will be stable. 

Circular Series Fluorescent Ballast

Various Starting Methods of Antron’s BIAX PL-L Fluorescent Ballast SeriesAntron BIAX PL-L series fluorescent ballast has three kinds of different starting method, they are instant start, rapid start and program start. Antron provides series of ballasts for BIAX PL-L lamps, from 13W to 96W, you also can choose to connect 1 to 4 lamps with different starting method、case size and the number of lamp. We believe you can find a ballast power supply to match your lighting products. Why Choose Antron’s BIAX PL-L Electronic BallastBIAX PL-L fluorescent tubes can be equipped with electronic ballasts or inductive ballasts. Although the inductive ballast is not easy to be damaged due to the traditional steel coil. But it needs to be matched with a starter, the lights flicker easily and the power factor is low. The electronic ballast provided by Antron, in addition to eliminating the need for a starter, can increase the current frequency to eliminate flickering, reduce visual fatigue, and keep the light source stable, which is conducive to energy saving. BIAX PL-L Electronic ballast is your priority choice. 

BIAX PL-L Fluorescent Ballast

Antron current selectable LED driver series ranges from 40W to 150W with a special selling point: adjustable output current/wattage throughDIP switch. Three or more output current/wattage options on a single compact LED driver that wecustomizedfor all your need. Universal input voltage 120-277, 347VacAdjust output current (power)Customized current (power) options availablePFC, Flicker Free, Isolated design3-in-1 Dimming (PWM, 0-10V, Resistance)Open/Short/Over-Voltage/Over Temp. protectionSuitable for UL dry and damp location5 years warranty 

Current Selectable LED Driver 

J&T Lighting Co., Limited

Custom metal part for outdoor wall light application. We can develop and produce the custom lighting parts according to your specifications. 

Custom Metal Part

UV aging test Chamber (also known as UV accelerated aging test chamber UV weathering aging test chamber, UV aging test machine) is a professional equipment for material weathering test. It uses UV lamps to simulate the ultraviolet radiation of natural sunlight, restores the dew and rain environment through condensation and water spray systems, and integrates high temperature, high humidity and other conditions to form a cyclic test program. It can reproduce the aging damage of materials that takes months to years to appear outdoors in a few days or weeks. The testing principle is based on simulating environmental accelerated aging: using UV lamps to simulate sunlight, condensing moisture to simulate rain and dew, placing the material in a cycle of alternating light and moisture, accelerating aging at a specific temperature, and quickly obtaining weather resistance data. The equipment is widely used in coatings, resins, plastics, rubber and other industries, covering automotive, electronics, pharmaceutical and other fields. It can simulate the damage of sunlight, rain and dew to materials, such as fading, powdering and cracking, helping enterprises screen new materials, optimize formulas and evaluate material performance, providing key support for product quality improvement and R&amp;D process acceleration. Reference standards: Standard NOStandard NameAATCC TM186Standard Practice for Accelerated Aging of Nonmetallic Materials: Fluorescent UV/CondensationASTM D3794Standard Test Methods for Resistance of Organic Coatings to the Effects of Accelerated WeatheringASTM D4329Standard Practice for Exposure of Plastics to Fluorescent Ultraviolet LampsASTM G151Standard Practice for Operating Light – and Water – Exposure Apparatus (Fluorescent UV – Condensation Type) for Exposure of Nonmetallic MaterialsASTM G154Standard Specification for Fluorescent Ultraviolet – Lamp Apparatus for Exposure of Nonmetallic MaterialsASTM G53Standard Practice for Operating Light – and Water – Exposure Apparatus (Fluorescent UV – Condensation Type) for Exposure of Nonmetallic MaterialsASTM D4329Standard Practice for Exposure of Plastics to Fluorescent Ultraviolet LampsDIN 53384Testing of plastics; artificial weathering, artificial light exposure and xenon arc exposure of plasticsISO 11507Plastics – Determination of resistance to photo – oxidation in the laboratory by measurement of changes in properties after exposure to fluorescent ultraviolet (UV – A) radiationISO 4892-3:2013Plastics – Methods of exposure to laboratory light sources – Part 3: Fluorescent ultraviolet lampsJIS D0205Test methods for weather resistance of automotive partsSAE J2020Fluorescent Ultraviolet (UV) Condensation Exposure of Automotive Interior Nonmetallic MaterialsNote: Different standards have slightly different requirements for UV aging tests. We recommend that you confirm with LISUN engineers which standards each LISUN UV aging chamber model meets in order to accurately match your testing needs. 

UV Aging Test Chamber

Stamping Lamp Part for LED Ceiling Lamp We can develop and produce the custom lighting parts according to your specifications. 

Stamping Lamp Part(Ceiling Lamp)

Custom metal part for lighting We can develop and produce the custom lighting parts according to your specifications. 

Custom Metal Ring for Lighting

CustomizablePC Housing for Outdoor Wall Light We can open the new molds and produce the PC parts according to your design drawings. 

PC Housing for Outdoor Wall Light(Customizable)

Customizable Die-casting Part for Lighting We can open the new molds and produce the die-cast aluminum parts according to your design drawings. 

Custom Die-cast Aluminum Parts

Customizable Die-casting Part for LED Flood Light We can open the new molds and produce the die-cast aluminum parts according to your design drawings. 

我的採購