家居用品，燈飾及建築

搜羅全球頂尖家居用品，燈飾及建築公司提供的家居用品，燈飾及建築資訊。您可在貿發網採購平台即時諮詢可靠和專業的產品供應商，以獲取詳盡的資料及報價。

家居用品，燈飾及建築供應商和製造商

Home Products, Lights & Constructions

燈飾

home

搜羅全球頂尖燈飾公司提供的燈飾資訊。您可在貿發網採購平台即時諮詢可靠和專業的產品供應商，以獲取詳盡的資料及報價。

燈飾供應商和製造商

Lights

深圳市熠輝照明科技有限公司

-UL listed for damp locations. -Equipped with an independent temperature controller, speciﬁcally designed for low-temperature environments. -Integrated emergency kit with combined driver and battery pack. -Compact design suitable for narrow installation spaces. -External high-capacity, long-life LFP (LiFePO4) battery pack. -Includes rest mode for extended storage life. -Over-Charging/discharging protection. -Operating ambient temperature: -4℉ to 140℉ (-20℃ to +60℃). -8-year design life and 5-year limit warranty. -Equipped with a built-in heating and temperature control device to ensure reliable battery operation. 

STC36 series

LISUN ELECTRONICS (SHANGHAI) CO., LTD

Temperature Humidity Chamber | Thermal Chamber | Climate Chamber simulate different climatic conditions, such as heat-endurance, cold endurance, dryness-endurance and humidity-endurance which defines the performance of material. By testing the product under different climatic conditions to see whether its performance can meet the intended requirements. It is widely used to test the CFL/LED, electricity products, automative cars, home appications and mobiles. This series of aging test chamber is suitable for the reliability test of industrial products. It has the characteristics of temperature and humidity control precision and wide control range. Standard:IEC60068-2-1 ” Environmental testing – Part 2-1: Tests – Test A: Cold”IEC60068-2-2 “Environmental testing – Part 2-2: Tests – Test B: Dry heat”IEC60068-2-78 “Environmental testing – Part 2-78: Tests – Test Cab: Damp heat, steady state”IEC60598-1 “Luminaires – Part 1: General requirements and tests”IES LM-80-08 “Approved Method: Measuring Lumen Maintenance of LED Light “GB/T2423.17 “Environmental testing for electric and electronic products – Part 2: Test method – Test Ka: Salt mist”GB/T5170.2 “Inspection methods for environmental testing equipment for electric and electronic products — Temperature testing equipment”GB/T5170.5 “Inspection methods for environmental testing equipments for electric and electronic products―Part 5:Damp heat testing equipments” What is a Climate Chamber?Climate chamber is used to simulate a temperature environmental condistions. It may also be called environmental chambers or thermal chamber or temperature chamber. You can click the below videos to learn the details and also how to operate it. Specification:• The temperature humidity test chamber is made of SUS304 Steel. The thermal insulation layer is made of polyurethane hard foam ultra-fine glass fiber. The heat-insulated doorframe uses high temperature aging silicone rubber sealing strip.• The temperature controller of the climate chamber includes Korean TEMI display in English/Chinese and German Siemens PLC. It can communicate with PC via RS-232. The temperature accuracy is 0.1℃ and humidity accuracy is 0.1%R.H.• The temperature sensor is platinum PT100Ω/MV.• The independant heating system uses nickel-chrome electric heater.• The refrigerating system is fully enclosed air-cooled single-stage compression refrigeration mode, and the compressor is from France TECUMSEH brand which can allow you get after sales support from many other countries.• The circulation system uses temperature resistant and low noise air-conditioned motor and multi-blade centrifugal wind wheel.• The safety protection system includes electric leakage, short circuit, over temperature, motor overheating, compressor pressure, overload, over-current protection.• Working Voltage: AC380V±10% 3 phases and frequency 50Hz/60Hz• Working Environmental: Temperature 5℃～+30℃ and Humidity ≤85%R.H  

Temperature Humidity Chamber | Thermal Chamber

精進電子裝配公司

 Features:  	 It is designed with highly accurate NTC thermistor sensor which incorporated with high preformance electronic control circuit to provide much accouracy temperature switching control. 	 Select desired confortable temperature by temperature selection dial. 	 On/Off Switch 	 Select Heater / Air Conditioner by Dip Switch 	 LED On/Off for Power / Mode indication   Gerneral Specification &amp; Data:  	 Temperature Range: 5℃ - 30℃ or 40&#39;F - 85&#39;F 	 Temerature Accuracy: +/- 1℃ or 3&#39;F 	 Rating Voltage: 230VAC 50Hz 	 Maximum load: Resistive 16 Amps at 230VAC, Inductive 9 Amps at Cos&Phi;=0.4 	 Or Rating Voltage: 125VAC 60Hz 	 Masimum load: Resistive 15 Amps at 125VAC, Inductive 1/2 HP at 125VAC, TV5 	 Approval: CE EMC LVD ETL 	 Optional: External Sensor with 3 meter cable.  
&nbsp;

Analogue Plug In Thermo-Controller 

Shenzhen Leynew Technology Co., Ltd. 

   One remote to control multiple controllers at the same time.   Allow single control and group control.   Can achieve color temperature control of constant voltage LED lamps.   Promise for a more accurate control.   Supply voltage: DC5V-24V.   Output: 2 channels, common anode.   Output current: &lt;8A (each channel).   Output power: 12V:&lt;192W, 24V:&lt;384W.   CE, ROHS  

2.4G Color Temperature Controller

Shenzhen City Welnam Advertisement Co Ltd

This AC-powered electronic ballast is specially designed for HID lamps. The electronic ballast is constructed of a rugged housing to withstand daily wear. The compact and lightweight design makes is perfect to accompany with any modern lighting equipment.

 
  Excellent workmanship. 
  Available in different models. 
  Lightweight and compact design. 
  Metal case. 
  Great compatibility with different HID lamps 
  Low-frequency working condition 
  Constant wattage output 
  Smart IC control to handle abnormal conditions 
  Automatic restart of lamp replacement. 
  Lamp: HCI/CDM/HQI / HPI/MHN 70W 
  Input voltage (V): 220-240. 
  System power (W): &le;80W. 
  Power factor: 0.98. 
  TH D (%): &lt;10%. 
  Ambient temperature (℃): -15-60. 
  Casing temperature (℃): 80. 
  Fixing center diameter (mm): 116. 
  Weight per piece (g): 270. 
  Wiring diagram: A. 
  Application: S1-S6. 
 

AC-Powered Electronic Ballast

Raynen Electronics (HK) Ltd

   Lamp type: MH/HPS.   Power: 600W.   Input frequency: 50-60Hz.   Input voltage: 240V.   Input current: 3.55A.   Power factor: &ge;0.98.   Trigger voltage: &le;4kV.   THD: ＜10%.   Ambient temperature: -30~+50℃.   Surface temperature: ＜80℃.   Dimensions L x W x H: 310 x 106 x 79mm.   Weight: 4.0-4.3kg.  

600W Electronic Ballast with Remote Control

Ningbo Longyuan Illuminate Appliance Co., Ltd.

This is a control gear unit for high pressure sodium and metal halide lamps. It features a durable housing with excellent heat dissipation. Well-engineered, this unit delivers reliable performance with high stability.
 
  Long service life. 
  Various designs are available. 
 

Control Gear Unit

Delight Power Products Limited

 	 Connect power supply to the connected lid network 	 Communicate with WB via RF 433MHz signal 	 Route data with other connected sc  

我的採購