電子產品

搜羅全球頂尖電子產品公司提供的電子產品資訊。您可在貿發網採購平台即時諮詢可靠和專業的產品供應商，以獲取詳盡的資料及報價。

電子產品供應商和製造商

Electronics

科學、測試和實驗室設備

elec

搜羅全球頂尖科學、測試和實驗室設備公司提供的科學、測試和實驗室設備資訊。您可在貿發網採購平台即時諮詢可靠和專業的產品供應商，以獲取詳盡的資料及報價。

科學、測試和實驗室設備供應商和製造商

Scientific, Testing & Laboratory Equipments

Manson Engineering Ind'l Ltd

This professional charger is designed for applications that demand adaptive charging for Lead Acid based and LiFePO4 (LFP) batteries. Battery with and without load can be connected to the charger all the time and the charger will keep on monitoring the battery. Smartphone apps for remote monitoring charger status for Bluetooth version charger. Adaptive Charging ManagementDifferent charging profiles are implemented for different types of battery.Lead Acid BatteryThere are 5 Stage Charging for LEAD ACID based batteries namely: Soft-Start/ Bulk/ Absorption/ Float/ Standby Advantage of 5 stage charging Soft-start for deeply depleted battery. This mode automatically start when battery voltage is less then 12VFully charge the battery with Absorption modeMaintain a fully charged batteryEnergy conversation in standby stageReduce grid corrosion with Standby modeLiFePO4 (LFP)A special charge algorithm and treatment for Lithium Ion Phosphate (LFP) batteries to ensure safe and optimal charging adaptive to the special chemistry of the battery which is quite different to Lead Acid battery. Advanced features 7 days self recycle charge of standby modeManual equalization charge for LEAD battery Sophisticated housing design Maximize protection by robust anodized Aluminum body completed with Poly carbonate end caps.Effective temperature control variable speed fan with balance between cooling and quite operation.Front exhaust design to minimize the possibility of water drop go inside casing.Easy replacement of FUSEEase of operation design 7 LED with 4 dual mode plus 3 for indications of charging status and battery selection.Single Set Button Setting with intuitive setting procedureBluetooth version charger allows for remote monitoring of charging status of battery on smartphones by using apps. The apps can be downloaded from Appstore or Google Play.Noiseless operation 8 hour sleep mode keep the charger under noiseless operation until your sleepAlways half power mode for noiseless operationUse to charging of smaller size batterySupport charging Battery with load connected A load can be connected to the battery during charging as long as the load is not larger than the rated output of the charger.The charger can be used to power up dc load when not connected to battery. Battery Temperature sensing support Charging voltage auto-adjust according temperature changeShutdown charging when battery temperature over 60ºCProtections Charger over temperature protectionOutput short circuit protection.Output reversed polarity protection with thermal fuse. 

CBC-9000 Series AC-DC Professional Battery Charger

Optimal Efficiency 92% with Digital ControlThe high power conversion efficiency allows quiet and cooling running of the charger and can provide continuous full loadoperation at 40°C ambient temperature. Designed to cover old and new types of car alternatorsThe SBC-6104 are designed to address to the issues of wide swing of output voltages from the smart alternator, braking regenerative EURO 5/6 vehicles in fully charging the house battery. They are also suitable for use with distant house battery. The charger Booster provides fast safe charging profiles for 4 types of lead based and 2 types of Lithium FePO4 batteries. Multistage ChargingThis is a select (battery type) and forget charger designed for fast accurate and safe recharge of your deep cycle house battery banks. The (digital control) smart multistage charging enables the charger to be connected permanently to your battery banks without the worry of over charging or drying out the electrolyte. Lead acid based BatteryA 3 Stage Bulk, Absorption &amp; Float charging profile for 4 types of lead acid based battery with maximum constant charging current at the Bulk Stage and a Constant Voltage with decreasing charging at the Absorption Stage and a reduced voltage Float Charge for maintenance when battery is full. LiFePO4 (LFP) BatteryA 2 Stage charging is specially for 2 types LiFePO4 battery and charging current stops at the end of Absorption stage. Three charge control methods: Ignition Control:Charger starts charging only when ignition is on and stops charging when Ignition is off.This is the recommended control as it is safer and allows for large input voltage range. Input Voltage Control:This is for non-intelligent or older type alternators with sufficient high &amp; uniform voltage.Charging is cut off easily due to high threshold voltage to protect the starting battery. Vibration Sensor Control:Charger starts charging when repeated vibrations are detected and stops charging when no vibration is detected for over 2 minutes.The built-in vibration sensor makes it possible to use the charger by just connecting to the starter terminal without touching the car’s electrical/electronic wiring thus avoiding any possible excuse for revoking the car’s warranty.Features 480Watt power conversion efficiency &gt;90%.6 selective charging profiles suitable for charging for the most lead acid &amp; Lithium FePO4 batteries.Supplied with a remote Battery temperature sensor to ensure precise and safe charging in large temperature variation.3 types of operation control to choose for specific situation.Alarm signal (fault or not charging) available to integrate with your system.Thermostatically speed control Fan.Protections:Self recoverable Input under Voltage protection.Self recoverable Input over Voltage protection.Self recoverable Output over Voltage protection.Self recoverable Overcurrent protection.Self recoverable Charger over temperature protection. 

SBC-6000 Series DC-DC In-Car Charger for Lead and LFP Batteries

This new series of non-isolated digital DC-DC Step Down Converter with micro-processor control for fine adjustment of output voltage to optimally suit the loading condition. The 3 digit LED display shows: output voltage, current, operation mode and fault status It is further equipped with 4 special features:1. A full powered 2 Stage Charger with 14.3V Bulk &amp; 13.6V Float Charge.2. A Remote Control terminal that turns off the converter when the Ignition is switched off, preventing discharging of starter battery. This terminal can be used with other external on-off switch set up.3. A Remote Voltage Sensing at load point to ensure accurate output voltage for distant load/ battery to ensure optimal operation.4. An independent, separate and always-on output (0.5A 13.8VDC) for essential devices such as security system that requires a permanent dc source. It can also be used for the remote on off switch. Micro-Processor Control with switching mode power design.19 -36VDC Input with adjustable Output 12 to 15VDC in 0.2V step.3digit LCD display for Current, Voltage, Operation Mode and Protection Diagnosis .2 Stage full powered charger mode with 14.3V bulk and 13.6V float charge.Remote Voltage Sensing for optimal powering of distant load or charging battery.Remote control terminal auto On/ Off with ignition control and other external on/off switch.An independent always-on auxiliary output (0.5A, 13.8V) to power critical electronic device or the remote on off switch.8 fail- save protections of which 6 with diagnostic code at the LED display.Input under voltage warning has remote alarm connection.Optional accessory AVS-5025 vibration sensor to automatically control the On-Off charging operation without touching the car’s electrical system at all. This is ideal for non-technical users.Extensive ProtectionMulti-stage software based safety device with early warnings of impeding shut down faults for low input voltages. Most of the protections are self recoverable when conditions return to normal with 6 diagnostic code on the LED display. Input under voltage (self recoverable)Input over voltage (internal fuse)Output over voltage (self recoverable)Output short circuit (self recoverable)Output overload (self recoverable)Output (battery) reversed polarity (internal fuse)Over temperature (self recoverable)Fan Stuck Fault (jammed object removed -&gt; self recoverable)

SDC-5300 Series Programmable DC-DC Converter and Battery Charger

江門市耐力電池有限公司

These are components for battery monitor. They are mainly for testing lithium battery, which are commonly used in camera or mobile phone. Their designs can be customized.
    Component for charger: PCB and wire  Nominal capacity: 250-2200 v  Charge: lithium battery  

Battery Monitor

New Giant (Hong Kong) Limited

 RFNT2 Laptop Battery Tester
with 2 channels ,supporting two batteries at once
Test,Charge for most brands laptop batteries. 

Function:
*Charge: Two channels can work independently and serve two intelligent batteries separately. Active, pre-charge, constant current and constant voltage are the stages of charging mode.&nbsp;
*Test:Testing time is 30seconds and the purpose is to check both the charging and discharging performances. After finishing test, LED flickers with green color and LCD reports the test result.
Normal: Test OK Shown on LCD
Abnormal: Test NG Shown on LCD&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
*Online Functions:Tester can be connected with master machine via a USB port. Users can monitor, control and set parameters via Battery Manager software in the master machine.

 Feature:  	 Supporting two intelligent batteries at once 	 With charge and test functions 	 LCD for displaying battery information 	 LED for indicating working status 	 Pre-charge, fast charge and constant voltage charge for charging stages 	 USB port for connecting with computers, master machine can monitoring and control slave machine  
 Basic Parameters:  	 Model RFNT2 	 Brand poloso 	 Dimensions 201 x 99 x 35 mm 	 Weight 333g 	 Adapter Input: AC 100 ~ 240 V&nbsp;&nbsp; Output: DC 19V 4.74A 	 Display mode Segment LCD with white backlight 	 LED in red and green 	 Charging mode Constant current + constant voltage 	 Charging current 	 Maximum charging current of each channel: 2.5A 	 Standby power consumption &le;1W 	 Charging time Maximum 8 hours 	 Working temperature 0~40℃&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 20%-90% RH (Non condensation) 	 Storage temperature -20℃~65℃&nbsp;&nbsp; 10%-95% RH (Non condensation) 	 Accessories 1 * adapter,1*CD,14*connectors ,10*cables ,10*jumper  

RFNT2 poloso two channels universal laptop battery tester charger 

 16-Channel Intelligent Laptop battery tester charger discharger
support 16pcs batteries at once&nbsp;
test ,charge ,discharge,calibrate capacity,50% capacity 

 Feature: 
1.Support 16-channel batteries at once
2.Supply for charge, discharge, test, capacity correction, charge/discharge 50% capacity function
3.Real-time updates batteries data,LED indicates working status.
4.Obtain detailed information each channel battery accurately, and intuitive display by software interface
5.Real-time draw record battery working curve

 Basic Parameters 
Size:540&times;315&times;220mm
Weight:15kg
Input: 100~240V,
Output: 24V/32A
Charge Current:2A/2.5A(Max)
Discharge Current:500m/3A(Max)
Standby Power Consumption:&le;1W
Working Temperature:0-40℃,20%-90% RH(Non Condensing)
Storage Temperature:-20℃-65℃,10%-95% RH(Non Condensing)
Cooling: active cooling
Intelligent Protection: overvoltage, over-current protection, short circuit protection and exception alerts
Accessories:1*RFNC8 ,1*power cord ,8*2.0mm universal wire ,8*2.5mm universal wire

 Function 
 1.Charge 
Battery charge include following several stages,the initial battery charge mode depending on battery starting voltage , the charging process may not need to activate and pre-charge
 2. Discharge 
Internal constant current discharge,discharge current default is 500mA, up to 3A.You can set the discharge current through RFNC8 software ,may exist a little deviation between set value and actual value,specific value is unrelated with batteries.
 3. Test 
By charging and discharging the battery for short time,to test the charge/ discharge function is good or bad . Charge 20s, discharge 10s.
Test OK ,the LED green light flashing , and the software pop-up prompt.
Test Fail ,the LED red light flashing and the software pop-up prompt
 4.Capacity Correction 
The battery capacity value in the battery management chip will different from the actual capacity after a battery goes through many recycling cycles. It will affect the use of the battery when the difference reaches a certain degree. Capacity correction is to deep discharge a battery and then fully charge, which will correct the capacity value in the battery management chip.
 5.CD50% &amp; DC50% 
CD50%: charge firstly, and then discharge to 50% capacity
DC50%: discharge firstly, and then charge to 50% capacity

16channels Universal Laptop Battery Tester With Testing Charge Discharge Calibrate Capacity Function

Dongguan Kechao Electronic Co.,Ltd

 	 12 Or 24 Volt DC 	 Unique and Convenient 	 With percentage LCD display 	 With 12V socket connection for car charger​ 	 This handy device plugs straight into your vehicle cigarette lighter socket,and warns you when battery power is running low. 	 Not only that,but it disconnects power through the unit when power gets too low. 	 This means you can run any 12V lighting,an inverter or charger etc,and not risk draining your battery so far that it causes damage. 	 Simple plug and play operation,no tools requried.  

Digital Battery Tester

 POLOSO Brand Laptop Battery Tester Charger Discharger
Model: RFNT3
Testing the charge/ discharge function is good or bad
Charge ,Discharge,Calibrate capacity,50% capacity function
Compatible with over 95% brands laptop batteries by 14kinds different connectors 

 Funciton: 
 *Charge 
Active, pre-charge, constant current and constant voltages are the stages of charging mode. The initial charging mode depends on the battery voltage, so active and pre-charge don&#39;t happen to every batteries.
 *Discharge 
Constant current discharge for double loads
Inner load: 0 ~ 1000mA, adjustable continuously via Battery Manager
External load: 0mA, 500mA, 1000mA, 1500mA, 2000mA, five gears with dip switches offered
 *Test 
Testing time is 12 seconds and the purpose is to check both the charging and discharging performances. After finishing test, LED flickers with green color and LCD reports the test result.
Normal: Test OK Shown on LCD
Abnormal: Test NG Shown on LCD
 *Capacity Correction 
The battery capacity value in the battery management chip will different from the actual capacity after a battery goes through many recycling cycles. It will affect the use of the battery when the difference reaches a certain degree. Capacity correction is to deep discharge a battery and then fully charge, which will correct the capacity value in the battery management chip.
 *50% Capacity 
CD50%: charge firstly, and then discharge to 50% capacity
DC50%: discharge firstly, and then charge to 50% capacity
 *Online Functions 
Tester can be connected with master machine via a USB port. Users can monitor, control and set parameters via Battery Manager software in the master machine.

 Feature: 
1.with one channel, supporting one intelligent battery
2.Supporting charge, discharge, test, capacity correction, charge / discharge 50% capacity
3.LCD for displaying battery information
4.LED for indicating working status
5.With charge-key, discharge-key, backlight-key and function-key
6.Pre-charge, fast charge and constant voltage charge for charging stages and the variation range of the values of the constant current and the constant voltage is less than 1%
7.Constant current for discharging
8.With a USB port for connecting with computers, master machine can monitoring and control slave machine

RFNT3 Universal Laptop Battery Tester with test charge discharge calibrate capacity function

Shenzhen Asundar Electronics Co Ltd

The outlined testing instrument is optimized for development and testing of charger or battery-powered devices. Professionally engineered, it allows fast conversion of &ldquo;charging&quot; and &ldquo;discharging&quot; statuses. This testing equipment is ideal for testing power banks use.
 
  Infinite times can be simulated charge and discharge. 
  Voltage or current can be easily set. 
  Accurate voltage or current display. 
 

Power Bank Test Equipment

Shenzhen Wopson Electrical Co.,Ltd

Main Feature: 	 23mm ip68 waterproof camera 	 Adjustable super-bright led 12x 	 Color TFT monitor 7inch 	 5mm figberglass cable in 20/20/40m length optional. 	 Dvr function support max 256G SD card. 	 One&nbsp;click snapshot and video, 	 Built in meter counter and keyboard typing 	 10 level digital zoom 	 Over 7hours running time. 	 Portable,easy to use. 	 512Hz transmitter and receiver optional. 	 Meter counter optional   Component Specification  	 Waterproof Camera 	 Camera size: 23 x 120mm&nbsp;&nbsp; 	 Camera shell material: Stainless steel camera 	 Camera glass material: sapphire glass 	 Sensor size:1/4 inch 	 Total Pixels:PAL:720X576&nbsp;&nbsp;&nbsp;NTSC:720*480 	 View angle:120&deg;. 	 Camera light:12PCS white LEDS. 	 Special gold point touch connector&nbsp; 	 Waterproof:IP68 	 Camerawork current:100MA&nbsp; 	 LEDS ADJUASTABLE 	 Work temperature:-10&deg;C-50&deg;C   Handle monitor  	 Monitor size: 7inch TFT color monitor 	 Monitor Total Pixels:1440X234 	 Monitor power supply :DC 12V 	 osd language: English 	 Up, down&nbsp; left, right adjustable. 	 16:9&nbsp; 4:3 model 	 Sunshade include 	 Waterproof connector 	 Work temperature:-10&deg;C-50&deg;C 	 Cable wheel 	 Cable size :332 x 132mm 	 Wire material: fiberglass rod 	 Fiberglass length:20/30m 	 Fiberglass diameter:5mm 	 Fiberglass color: yellow/blue   Battery  	 Battey pype:12V 4000MAH&nbsp;&nbsp;&nbsp;&nbsp; 	 Rechargeable-ionn battery(18650) 	 Used time&nbsp;:&nbsp;7&nbsp; hours. 	 Charger 	 input:AC90-260V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; output: DC 12V&nbsp;&nbsp;&nbsp; 1000MA 	 Output cable length:1.5M 	 DC plug diameter :2.1MM  

CCTV Camera for Sewerling Inspection with Meterage factory price

Shenzhen Victor Hi-Tech Co Ltd

ProjectVICTOR 77VICTOR 78VICTOR 79MeasurementDC voltageRange±51V±400V±400VThe highestresolution10mV0.01mV0.01mVBasic accuracy0.5%0.2%0.2%AC voltageRange`510V400V400VThe highestresolution100mV0.1mV0.1mVBasic accuracy1.5%0.5%0.5%ResistanceRange5kΩ40MΩ40MΩThe highestresolution1Ω0.1Ω0.1ΩBasic accuracy0.5%0.2%0.2%DC currentRange±22mA±400mA±400mAThe highestresolution1uA10uA10uABasic accuracy0.2%0.2%0.2%AC currentRangeN/A400mA400mAThe highestresolution10uA10uABasic accuracy0.5%0.5%ThermocoupleRangeN/AN/AR,S,B,E,K,J,T,NThe highestresolution1°CBasic accuracy0.5%RTDRangeN/AN/ACu50,Pt100The highestresolution1°CBasic accuracy0.5%CAPRangeN/AN/AN/AThe highestresolutionBasic accuracyFrequencyN/A10Hz～100kHz10Hz～100kHzDiode test√√√Continuity beeper√√√Data hold√√√Relative value measurementN/A√√SourceDC voltageRangeN/A-50.0mV～550.0mV-0.500V～5.500V-10.00mV～110.00mV-0.5000V～5.5000VResolution0.1mV,1mV0.01mV,0.1mVBasic accuracy0.2%0.2%ResistanceRangeN/AN/A0～400.0ΩResolution0.1ΩBasic accuracy0.2%DC currentRange22mA22mA22mAResolution0.001mA0.01mA0.001mABasic accuracy0.2%0.2%0.2%Simulating transmitter√√√25％,100％Step output√√√Automatic rampN/A√√Automatic stepN/A√√Display current and % of span√√√Loop power24V15V15VFrequencyN/A1.0Hz～11.0kHz1.0Hz～11.0kHzThermocoupleN/AN/AR,S,B,E,K,J,T,NRTDN/AN/ACu50,Pt100Loop detectionThe 24V loop power supply and measuring the current√N/AN/ABuilt in 250 ΩHART loop resistance√N/AN/APower Supply2×1.5V AA Alkaline battery4×1.5V AAA Alkaline battery4×1.5V AAA Alkaline batteryAuto Power-off√√√BacklightN/A√√SafetyCAT Ⅳ 600V,Pollution degree 2CAT Ⅲ 600V ,Pollution degree 2CAT Ⅲ 600V,Pollution degree 2Size180×90×52205×95×42205×95×42WeightAbout 400gAbout 500gAbout 500gAccessoriesTest line, manual,fuseTest line, manual,fuseTest line, manual,fuseStandard Quantity Per Carton10pcs10pcs10pcsStandard Carton Measurement395mm*385mm*260mm395mm*385mm*260mm395mm*385mm*260mmStandard Carton Cross Weight8.8Kg9.8Kg10.2KgProcessMeter ( referred to as “the meter ”)is a handheld, battery-operated tool for measuringelectrical parameters. It has all the features of a digital multimeter, it could also output signals ofdirect voltage, current and frequency as well.If the meter is damaged or something is missing, contact the place of purchase immediately.Contact a distributor for information about DMM (digital multimeter) accessories.General Specifications Power supply: 6V batteries(4×1.5 V alkaline AAA batteries or 4×1.5 V Ni-MH AAAbatteries )Maximum Voltage:600Vp-p(Maximum Voltage between all input jacks and earth ground)30V DC (Maximum Voltage between all output jacks and earth ground) Operating temperature: 5℃-50℃Operating relative humidity:≤ 80% RHStorage temperature: -10 ℃-55 ℃Storage humidity:≤ 90%RHSize : 205 ×95× 42 mm (plus protector) Accessories: a copy of users manual, a set of CF-733370 industrial test lead (with alligatorclips) and two 63mA/250 fast-blow fusesOptions: battery charger  

VICTOR 78+ Process Signal Source

 WOPSON Pipework Camera Drain Maintenance Camera with Rotate Cable And USB Stick 
 Camera  	 Camera size: 23mm x 125mm 	 Camera case material:stainless steel house stainless steel 304 	 Camera glass material:sapphir glass 	 Sensor size: 1/4 inch 	 Total Pixels:PAL:720X576&nbsp;&nbsp; NTSC: 720X480 	 View angle:120&deg;. 	 Camera light:12PCS white LEDS. 	 Special gold point touch connector 	 Waterproof:IP68 	 Camerawork current:100MA&nbsp;&nbsp;&nbsp;&nbsp; 	 Camara power supply:DC 12V 	 LEDS ADJUASTABLE. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 	 512hz build in transmitter   Monitor  	 1. monitor size:9inch TFT color monitor 	 2. monitor&nbsp;Total Pixels: 800x480&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 	 3. monitor power supply:DC 12V 	 4. osd language: english &nbsp; 	 5. up,down left,right adjustable 	 6. 16:9 4:3 model&nbsp; 	 7. sunshade include&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 	 8. waterproof connector &nbsp;&nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 	 9. Work temperature:-10&deg;C-50&deg;C  
 Cable wheel  	 Cable size: 320MM(diameter)X110(h) &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 	 Fiberglass length:20M( standard) &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 	 Fiberglass color:yellow 	 Wire material: fiberglass rod 	 Fiberglass diameter:4.8MM 	 Meter counter   Battery  	 Battey type:12V 4000MAH &nbsp; &nbsp;&nbsp; 	 Used time :7 hours 	 Rechargable li &ndash;ion battery(18650)&nbsp;  
 Charger  	 Input: AC90-260V &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 	 Output: DC 12V&nbsp;&nbsp; 1000MA 	 3.Output cable length:1.5M&nbsp;&nbsp;&nbsp; 	 4.&nbsp;DC plug diameter :2.1MM   Box  	 Box size:48cm x 39cm x 19.5cm 	 Box material:fire protection &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;  
 Skids size  	 SKIDS1: 40MM &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 	 SKIDS2: 80MM  
Keyboard 	 Keyboard size: 220 x 110 x 15mm 	 Language:english 	 Keyboard interface:USB inport 	 Text edit line:PAL 28 letter 15 line; NTSC 26 letter 12 line 	 Max edit page: 4pages&nbsp;  

WOPSON Pipework Camera 

Oriental Electronic Ind'l Co., Ltd.

  It is an iPOD charger  It has two set of wires in the two end of the charger  It is an essential audio equipment  

我的採購