踏板車

漳州市華儀電子有限公司

  - This clamp meter has a handle which makes it very handy for use.  - It is suitable for electricians and handymen.  - It is equipped with a continuity beeper and can carry out insulation test.  - It can also hold the data measured.  - DCV: 1000V +/- (0.5%+1).  - ACV: 750V +/- (1%+4).  - ACA: 200A - 1000A +/- (2%+5).  - OHM: 200 - 20k onm +/- (2%+2).  - Power supply: 9V 6F 22.  - Maximum display: 1999.  - Product size: 230x90x37mm.  

Clamp Meter

 	 DCV ACV ACA OHM 	 Continuty Beeper: yes 	 Insulaton test: yes 	 Data Hold: yes 	 Power: 9V 6F22 	 Maximum Display: 1999 	 Display Size: 14 x 47mm 	 Product Net Weight: 320g 	 Product Size: 230 x 90 x 37(mm)  

DCV:1000V +/-(0.5%+1),ACV:750+/-(1%+4),ACA:200A-1000A +/-(2%+5),OMH:200-20K ohm(2%+2),continuty 
    Beeper:yes, power :9V 6F22 maxium,display:1999 display, size:14*47mm   Product net weight:320g,product size:230*90*37(mm),quantity:20pcsM  Dimension:51.2*28.5*27.3(mm) G.W. :10.5KGS N.W.:9.5KGS  

龍程實業(香港)有限公司

 	 2000 counts LCD display 	 Manual range 	 DC / AC voltage 	 AC current 	 Diode test 	 Data hold 	 Low battery indication 	 Overload protection  

clamp meter

美特(中國)有限公司

  Introduction :  
Digital clamp meter integrated with AC / DC hall effect sensor, 3-3/4 Digit 6000 Count, True RMS, auto and manual measurement.

  Advance features :  
- Wide response band width.
- Large LCD display.
- Audible sound and visible indication during continuity check.
- Non-contact Frequency detection &lsquo;NCF&rsquo; 50 / 60 Hz
- Software calibrated.

  Specifications :  
- True RMS
- 6000 counts (3-3/4 digit)
- Auto / Manual &lsquo;V&rsquo; (600V AC)
- Auto / Manual &lsquo;V&rsquo; (AC ) with Hz / % selectable
- Auto / manual resistor measurement (60M&Omega;)
- Continuity check : &lt;50&Omega; Beep
- Diode check : 3.000 V
- 600A / 600A (AC / DC) current
- AC current with Hz / % selectable
- Capacitance : 10nF - 100mF
- Frequency 10Hz - 10MHz
- Hz / Duty cycle 1-99%
- &lsquo;NCV&rsquo; Non-Contact AC Voltage Detection (Audible and Visible) &gt; 100V : Numerical digital display AC voltage strength
- Freeze / Hold reading
- Auto power off : (5 mins)
- Anti Burn Protection (ABP) on full range and up to 250V (AC / DC) (NOT at &mu;A / mA CURRENT)
- &lsquo;NCF&rsquo; Non-Contact Frequency Detection
- Relative reading (Rel)
- Input impedance 10M&Omega;
- &lsquo; OL &rsquo; Over range display
- Low battery indication (2.6V approx.)
- Maximum Conductor diameter for measurement (mm) &lt; &Oslash;50
- Maximum open jaw (mm) : &Oslash;50
- Measurable temperature from thermocouple -50&deg;C ~ 1000 &deg;C (-58&deg;F ~1832&deg;F)&nbsp;
- &#39;K&#39; type temperature Ni-Cr and Ni-Si sensor, temperature range measurable -40&deg;C ~ 250&deg;C ( -40&deg;F ~ 482&deg;F) to be provided
- Battery powered : 1 x 3V (CR2032)
- Dimension (LxWxD) mm : 208x77x16
- Weight (approx.) grams : 140 (without battery)&nbsp;

Digital Clamp Meter with 6000 count 

  Key Specifications/Special Features:   	 True RMS 	 4000 Counts (3 3/4 digits) 	 Auto/manual range 	 Maximum conductor diameter for measurement: &le;&Oslash;50mm 	 Maximum open jaw: &le;&Oslash;50mm 	 Large LCD display 	 Auto-power off (APO): 5mins approximately 	 Over-range display 	 AC current measurement: 0-400A, 50-1000A 	 Max AC current measurement: 4000A 	 Non-contact AC voltage detection (NCV) (with audible sound and visible indication) 	 Single probe test (SPT) in AC circuit (with audible sound and visible indication) 	 Auto/manual AC/DC voltage measurement 	 Auto/manual resistor measurement : 0-40M&Omega; (approx.) 	 Continuity check: &lt;50&Omega; buzzer sounds 	 Diode check 	 Hold/freeze reading 	 Input impedance : 10M ohm 	 Max/min/max-min reading 	 Relative reading 	 Low battery indication 	 Software calibrated, no variable resistor adjustment 	 Popular test leads 4mm banana type 	 Battery powered : 1 x 3V (CR2032) 	 Dimension (LxWxD) mm : 203x77x16  

Slim Pocket Clamp Meter

Tronico Technology Co Ltd

Power Monitoring Clamp Sensor can instantly check the power consumption. With our mobile apps, user can check the daily, weekly, monthly power consumption.

Power Monitoring Clamp Sensor

Suzhou TASI Electronics Co., Ltd.

Digital Clamp

Honeytek Instrument (HK) Co.

2000 counts max. display (HK588A &amp; HK588B) 4000 counts max. display (HK588C &amp; HK588D) 6000 counts max. display (HK588E) Overload protection for all ranges Built-in NCV (non-contact voltage detection) function Low pass filter function (HK588A &amp; HK588B) Inrush current function (HK588E) Built-in bright flashlight LCD backlight

Digital Clamp Meter

 	 Manual range 	 DC / AC voltage 	 AC current 	 Resistance 	 Diode test 	 Audible Continuity Test 	 Data Hold 	 Insulation test (with 261 option) 	 Low battery indication 	 Overload Protection  

科泰儀器（昆山）有限公司

  11 ranges in 5 functions  AC current measurement up to 2000A , Ac voltage measurement up to 600 V, DC voltage measurement up to 300 V , Resistance measurement up to 200kΩ   Hold function  Clamp opening 57 mm   Power supply:1×1.5V,IEC LR03   Fuse 0.5A/250V   IEC 61010,CAT II/1000V   

Analogue Clamp meter

標準儀器有限公司

This clamp meter provides accurate AC, AC/DC current and voltage readings regardless of the waveforms. This meter can use in most industrial and commercial applications where non-linear loads distort the current or voltage waveform.
 
  Reliable operation. 
  Features accessories such as test leads, carrying case and temperature probe. 
 

Shenzhen Everbest Machinery Industry Co., Ltd. (CEM)

 	 Clamp meters offer all the features you need to fit the way you work. 	 The small bodies and jaws fit perfectly in your hand and into tight places. 	 Meter controls are positioned so that current measurements can be done with one hand. 	 A large backlit display (on most models) is easy to see and a handy Display Hold keeps measurements on the display. 	 Measuring starting current for motors, lighting, etc. 	 It is easy with the inrush current function (on most models).  

Featured is a digital multimeter with a large LED screen. The simple design of the operating buttons on the front makes it easy to manage. The ergonomic design provides a comfortable fit for grabbing. The clamp on top allows&nbsp;you to clamp the multimeter on objects. This multimeter is a great tool for electrical measurements such as voltage, current and etc. 	 DC voltage 200mV, 2V, 20V, 200V, 500V: +-(0.5%+2). 	 AC voltage 2V, 20V, 200V, 600V: +-(1.0%+3). 	 LCD size: 33 x 21mm. 	 Maximum jaw size: 21mm. 	 Net weight: 150g.  

Digital Clamp Multimeter

 	 Manual range 	 AC voltage 	 AC current 	 Diode test 	 Audible continuity test 	 Data hold 	 Low battery indication 	 Overload protection  

Kilter Electronic Institute Co., Ltd.

 	 High resolution DC/AC 1mA 	 23mm large jaw diameter 	 One Touch Zero for DCA adjustment 	 Large 3 3/4 digits LCD (3999 counts) 	 Auto range, Auto power off, Auto polarity display 	 Auto zero adjustment, Auto units display,Data hold 	 Diode &amp; Continuity Test,Capacitance Test 	 &nbsp; 	 &nbsp; 	 &nbsp; 	 &nbsp; 	 &nbsp; 	 &nbsp; 	 &nbsp; 	 Specification 	 Specifications Range Accuracy &plusmn;(%rdg+dgts) 	 DC Current 4A &plusmn;3.0%rdg&plusmn;2 	 40A &plusmn;2.0%rdg&plusmn;0.02 	 AC Current 4A &plusmn;2.5%rdg+3d 	 40A &plusmn;2.0%rdg+3d 	 DC Voltage 400mV &plusmn;1.0%rdg&plusmn;2 	 4V/40V/400V/1000V &plusmn;0.8%rdg&plusmn;2 	 AC Voltage 400mV &plusmn;1.8%rdg&plusmn;5d 	 4V/40V/400V &plusmn;1.0%rdg&plusmn;3d 	 750V &plusmn;1.5%rdg&plusmn;3d 	 Frequency 9.999Hz unspecified 	 99.99Hz-9.999MHz &plusmn;0.2%rdg&plusmn;3 	 Resistance 400&Omega;/4k&Omega;/40k&Omega;/400k&Omega;/4M&Omega; &plusmn;1.0%rdg&plusmn;2 	 40M&Omega; &plusmn;1.5%rdg&plusmn;2 	 Capacitance 40nF &plusmn;2.5%rdg&plusmn;10 	 400nF/4&mu;F &plusmn;2.0%rdg&plusmn;4 	 40&mu;F &plusmn;2.5%rdg&plusmn;4 	 Continuity If the resistance is less than 100( &Omega; ), the beeper will sounds continuously 	 Diode Display read approx.Forward voltage of diode. Accuracy:&plusmn;(3.0%rdg+3) 	 Weight Approx. 180g (including battery) 	 Dimensions 183mm(L) x 43mm(W) x 31mm(H)  

SE-02  DC/AC Clamp Meter,4A/40A

深圳市漢研電子科技有限公司

 	 Environment: 18℃~28℃（64℉~82℉）,Relative humidity&le;75% 	 Battery: （AAA2*1.5V） 	 LCD Size: 34&times;25(mm) 	 Body Weight: 220g 	 Dimensions: 176&times;67&times;33(mm) 	 Standard Accessories: Manual, certificate, probe, battery, box 	 Package: Color box 	 Package&nbsp;Quantity: 60 	 Package Size: 105&times;103&times;50(mm) 	 Standard Gross Weight: 22kg  

Pocket Clamp Digital Multimeter

 	  CP-07 AC/DC Current Clamp Probe  	 &nbsp; 	 Can connect with Oscilloscope. 	 AC/DC current Measurement. 	 1mA to 4A test range. 	 Bandwidth: DC~500kHz(-3db). 	 Noise level: &le;4mA(with average mode) 	 &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; or &le;20mA(DC~500KHz) 	 Jaw size: 5mm max. 	 Auto zero at power on. 	 Relative zero correction.&nbsp; 	 &nbsp; 	 Range 	 &nbsp; 	 Accuracy Sensitivity 	 400mA &plusmn;1.5% 1mA/1mV 	 4A &plusmn;1.5% 10mA/1mV  

CP-07 AC/DC Current Clamp Probe

朗怡國際有限公司

1.Made with high quality material
2.Various colors for selection 
3.Feel very nice and good abrasion resistance 


S Shape TPU Case for S4 Mini

漳州威華電子有限公司

Clamp Meter DT306B with Continuity Buzzer Small Size Amp Meter

Hong Kong Uranus Investment Co Ltd

  This handheld digital clamp meter comes in an extra-slim design. The ergonomic body allows you to hold and use it comfortably. This device is an excellent choice for small-current tests.        Practical and accurate.       Light in weight.   

Tecpel Co., Ltd.

DCM-040 features: 
   Accurate AC digital clamp meter for leakage current measurement.   10&mu;A high resolution on 40mA range.   Shield transformer jaws to minimize the effect of external stray magnetic field.   Large jaw with 30 mm diameter.   Five ranges (40mA, 400mA, 4A, 40A, 60A) for all application.   A filter circuit is designed to eliminate the effect of high frequency noise and harmonics for AC current measurement.   Large 3 3/4 digits LCD.   Fast bargraph display (20 times/sec.) for transient observation.   Continuity and frequency measurements.   Max/min, data hold functions, and relative measurement.   600V overload protection for ohm measurement.   Easy single rotary switch for any function selection.  Specifications (23&deg;C&plusmn;5&deg;C): 
   AC current: accuracy remarks.   Range resolution: 50/60 Hz wide (40 &ndash; 1kHz).   40mA 10&mu;A &plusmn;1.0%&plusmn;3dgts &plusmn;2.0%&plusmn;5dgts.   400mA 100&mu;A &plusmn;1.0%&plusmn;3dgts &plusmn;2.0%&plusmn;5dgts.   4A 1mA &plusmn;1.0%&plusmn;3dgts &plusmn;2.0%&plusmn;5dgts.   40A 10mA &plusmn;1.0%&plusmn;3dgts &plusmn;2.0%&plusmn;5dgts.   60A(0-50A) 100mA &plusmn;1.5%&plusmn;3dgts &plusmn;3.0%&plusmn;5dgts.   60A(50 - 60A) (1) 100mA &plusmn;3.0%&plusmn;5dgts &plusmn;3.5%&plusmn;5dgts.   Though the meter can display up to 400A, it is not calibrated beyond 60A.   AC voltage: (input impedance: 10M&Omega;).   AC voltage: (input impedance: 10M&Omega;).   Accuracy overload protection.   Range resolution: 50/60Hz, 40 &ndash; 1kHz.   400V 0.1V &plusmn;1.5%&plusmn;2dgts &plusmn;2.0%&plusmn;4dgts AC 800V.   Resistance (&Omega;) and continuity: open voltage 0.4V.   Range resolution accuracy beeping OL protection: 40-400&Omega; 0.1&Omega;., &plusmn;1.0% &plusmn;2dgts &lt; 38.0 &Omega;AC 600 V.  General specification: 
   General specification conductor size: 30mm max. (approx.).   Battery type: two 1.5V SUM-3.   Display: 3 3/4 LCD with 40 seg.   Bargraph.   Range selection: manual.   Overload indication: left most digit blinks.   Power consumption: 10 mA (approx.)  Low battery indication: 
   Sampling time: 2 times/sec. (display).   20 times/sec. (bargraph).   Operating temperature: -10&deg;C to 50&deg;C.   Operating humidity: less than 85% relative.   Storage temperature: -20&deg;C to 60&deg;C.   Storage humidity: less than 75% relative.   Altitude up to 2000m.   Dimension: 210mm (L) x 62.0mm (W) x 35.6mm (H).   8.3&quot; (L) x 2.4&quot; (W) x 1.4&quot; (H).   Weight: 200g (battery included).  Accessories: 
   Carrying bag x 1.   Users manual x 1.   1.5V battery x 2.   Certificate: CE.  

AC Leakage Clamp Meter

   Accurate DC/AC digital clamp meter for current measurement.   10mA high resolution on 40A DC/AC range.   One touch zero for DCA adjustment.   23 mm diameter jaw.   Large 3 3/4 digits LCD.   Fast bargraph display (20 times/sec.) for transient observation.   Continuity and frequency measurements.   Max/min and data hold functions.   600V overload protection for ohm measurement.   Easy single rotary switch for any function selection.   Ideal for works in crowded switch box or cable areas.  Specifications:
   Specifications (23 +/- 5 deg C).   DCA 0-40A 10mA +/- 1.0% +/- 2dgts.   DCA 0-150A 100mA +/- 1.0% +/-2 dgts.   DCA 150-200A 100mA -2.2% +/- 2dgts.   ACA 0-40A 10mA +/- 1.0% +/- 3 dgts.   ACA 0-150A 100mA +/- 1.0% +/- 3 dgts.   ACA 150-200A 100mA -2.2% +/- 3dgts.   DCV 0-400V 0.1 V +/- 1.0% +/- 2dgts.   ACV 0-400V 0.1 V +/- 1.0% +/- 2 dgts.   0 Ohm-400 Ohm 0.1 Ohm +/- 1.0% +/-2dgts beep if &lt; 40 Ohm (approx.).   Hz 0-1000KHz 0.1-100 +/- 0.5% +/- 2dgts 1V sensitivity auto range.   Conductor size: 23mm max. (approx.).   Battery type: two 1.5V SUM-3.   Display: 3 3/4 LCD with 40 seg.   Range selection: manual.   Overload indication: left most digit blinks.   Power consumption: 10 mA (approx.).  Low battery indication: 
   Sampling time: 2 times/sec. (display).   20 times/sec. (bargraph).   Operating temperature: -10 deg C to 50 deg C.   Operating humidity: less than 85% relative.   Altitude: up to 2000M.   Storage temperature: -20 to 60 deg C.   Storage humidity: less than 75% relative.   Dimension: 183mm (L) x 63.6mm (W) x 35.6mm (H).   7.2&quot; (L) x 2.5&quot; (W) x 1.4&quot; (H).   Weight: 190g (battery included).   Accessories: carrying bag x 1.   Users manual x 1.   1.5V battery x 2.   Certificate: UL, CE.  

Digital Clamp Meter 

思弗德國際 

   0-300mm, 0.01mm.   Carbide tipped scriber with clamp.   Battery included.   Long straight scale.   With measurements on the scale.   With a sliding bar along the scale.   Digital display on the bar.   Clear and easy readings.   Stable padded base.   Ideal for measuring the height of different objects.   Harmonization system (HS) code: 901780.   United Nations standard products and services code (UNSPSC): 27000000.  Optional height is available, please ask for quote
Model: 625-24-0 &nbsp; &nbsp;&nbsp; 0-600mm, +/-0.07mm
Model: 625-40-0&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0-1000mm, +/-0.10mm

我的採購

確定要取消關注此供應商？

確定要取消關注此供應商？