電子產品

搜羅全球頂尖電子產品公司提供的電子產品資訊。您可在貿發網採購平台即時諮詢可靠和專業的產品供應商，以獲取詳盡的資料及報價。

電子產品供應商和製造商

Electronics

零件，組件及電器用品

elec

搜羅全球頂尖零件，組件及電器用品公司提供的零件，組件及電器用品資訊。您可在貿發網採購平台即時諮詢可靠和專業的產品供應商，以獲取詳盡的資料及報價。

零件，組件及電器用品供應商和製造商

Parts, Components & Electrical Supplies

漳州市東方智慧型儀器表有限公司

Widely used in electro-optical source, research teaching, industry inspection as well as agriculture researching and illumination control
Large LCD display 	 Backlight LCD display 	 Data-hold function  Specifications 	 Range:1~50000 Lux in 3 ranges 	 Sampling Rate: About 2 times/sec 	 Sensor: Silicon photodiode &amp; filter 	 Weight: 198g 	 Power Source: 9V (6F22) battery x 1pc  

Digital LUX Meter

Featured here is a digital multimeter that combines five measurements in one unit. It comes with the ability to measure the voltage, current and resistance. This versatile multimeter is great for troubleshooting for a wide array of industrial or household devices.   Voltage: 400V.   Frequency: 10Hz.   Certification: CE, GS, CCC, UL.  

Digital Multimeter

 This analog meter is a rectifier type,permanent-magnet moving coil instrument for measurements of DC voltage,AC voltage,DC current,resistance,battery and decibels.
The meter is to operate at an ambient temperature from 0&Omega; to 50&Omega; with a relative humidity of less than 85%. 

Analog Multimeter

The featured digital multimeter comes with voltage, current, ohm, diode and continuity testing function. It has a digital display on the side and is equipped with two probes in black and red. This pocket sized multimeter flaunts a high portability and is convenient to use. 	 Pocket size digital multimeter. 	 With voltage, current, ohm, diode and continuity testing function. 	 Digital display on the side. 	 Equipped with two probes in black and red. 	 Rectangular shaped case. 	 High portability. 	 Convenient to use.  

美特(中國)有限公司

 	 Designed in UK 	 Displays PFC/ PSC at same time as Loop reading 	 250/ 500/ 1000V insulation test with auto discharge 	 Test leads auto-null for continuity mode 	 RCD auto test mode for 30mA RCDs 	 RCD ramp test function 	 End of line calibration certificate included 	 Hand-free mode controlled by separate button 	 Single rotary dial for function selection 	 Mains polarity test 	 Colour coded lead set with clips and prodes 	 Battery powered: 4XAA (R06/ LR06)  

Professional Multifunction 5 in 1 Tester

- Heavy duty rubberized cabinet
- Insulation testing up to 1000V
- Insulation breakdown voltage ramp feature
- Continuity feature
- Null function for accuracy
- Breakdown voltage diagnostic function
- Hands free function for use with continuity or insulation tests
- Fully protected against accidental connection to mains voltage
- Connection shown by red LED and an audible warning
- Visual and audible warning of voltage present
- Auto discharge of capacitive circuits
- Battery powered : 4 AA (R06 / LR06)
&nbsp; &nbsp;

Insulation and Continuity Tester

 Voltage Detect allows you safely and quickly check AC voltage by non-contact method. (90-1000V)

Features :  	 CAT IV 1000V 	 AC voltage detection 	 Audible sound 	 Bright torch / Flashlight 	 Pocket clip  

Non-Contact AC Voltage Detector

 This tester can measure grounding resistance and AC voltage up to 200V. 2mA current test signal permits grounding resistance tests without tripping current breakers in the circuit under test. It can be used in the grounding resistance measurements of power system, electrical device, lightning protection device, etc. It is easy to use and has a high precision.
SAFETY INFORMATION
This tester has been designed according to IEC-61010 concerning electronic measuring instruments with a measurement category (CAT III 200V). 

Multimeters

 Key Specifications/Special Features : 

- Non-contact ACV detection from 100-1000VAC CAT. III&nbsp;
- Robust design with over mold&nbsp;
- Operating On / Off switch&nbsp;
- Dual color LED indication&nbsp;
a) Standby - green&nbsp;
b) AC voltage sense - red&nbsp;
- Water resistant&nbsp;
- Pocket clip&nbsp;
- Battery powered : 2 x 1.5V (L1154 / LR44 / AG13)&nbsp;
- Dimension (LxWxD) mm : 160x20x15&nbsp;
-&nbsp;Weight (approx) grams : 19 (without battery)&nbsp;
- Packaging : Standard PVC Sliding blister card&nbsp;

&quot;FREE&quot; shipping cost arranged by &quot;First Come First Serve&quot;. Valid to 31 Mar 2018 for samples ordering only.

Non-Contact Voltage Tester

 Key Specifications/Special Features: 
- Self-test&nbsp;
- AC voltage test: Contact method from 70VAC to 250VAC&nbsp;
- AC voltage test: Non-contact method from 70VAC to 10,000VAC&nbsp;
- DCV / polarity check: 1.5VDC to 36VDC&nbsp;
- Continuity check: O= 5M ohms; L= 0-100M ohms; H= 0-200M ohms&nbsp;

 Advantages: 
- Built-in digital micro chips&nbsp;
- New program digital IC consumes less power (50% less than old version)&nbsp;
- Blinking LED indication when AC voltage is detected&nbsp;
- Hi / Low selector switch&nbsp;
- Instant sensor and display&nbsp;
- With sound and light feedback&nbsp;
- Battery powered: &nbsp;2 x 1.5V (L1154 / LR44 / AG13)&nbsp;
-&nbsp;Dimension (LxWxD) mm : 141x19x13
- China patent no.: ZL94300911.X, other countries patent pending&nbsp;
- For your reputation and safety, beware of imitation&nbsp;
- Worldwide patent pending&nbsp;
- Originated, designed and developed by MEET

&quot;FREE&quot; shipping cost arranged by &quot;First Come First Serve&quot;. Valid to 31 Mar 2018 for samples ordering only.
&nbsp;

Digital Voltage Tester

 	 UV Index measurement from 0-20 (0.5 increment) UVA &amp; UVB 	 4 digits LCD 	 Clock function : Month, Date, Hour, Minute, Second 	 4 years calendar 	 Hour format : 12/ 24 selectable 	 Alarm clock : 30 second alarm sound 	 Alarm chime enable / disable 	 LC display test 	 Operated by 1.5V x 2 pcs. button cell batteries (LR44, AG13, L1154 etc.) 	 Batteries included 	 &nbsp; 	 &nbsp; 	 &nbsp;  

Ultra Violet Detector_

深圳市勵駿光電有限公司

	Simple and easy to test the life of battery	Test batteries on and off the vehicle	Accurate results in milliseconds	Battery Life Analysis	Analysis Result : Good or Replace	Large easy to read LCD display.	Test results based on JIS, EN, DIN, SAE and IEC Standards.	Languages: English, Spanish, French, German, Italian, Polish	Quick test—input battery volume (AH), then it can show the battery status.	vehicle cranking system test--- cranking time, voltage and status.	vehicle charging system test—load voltage, unloaded voltage, ripple status and charging system status.	Store the testing result, print function	Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major battery standards JIS, SAE, EN, DIN and IEC are supported.	System voltage: 12 Volts	Input voltage range: 9V~15V	Power requirements: No internal batteries required. Power on when hooked up during testing.	Testing range: 100 ~ 2000 CCA, 100 ~ 1000 DIN, 100 ~ 1000 IEC, 100 ~ 1700 EN	AH range: 30-220AH

(Clone) 12V Auto Battery Tester

 Features: 

- 200 - 250VAC&nbsp;
- Neon indication for wiring conditions&nbsp;
- Test BS 1363 sockets&nbsp;
- 30mA RCD / ELCB trip test&nbsp;
- Dimension (LxWxD) mm : 50x52x50&nbsp;
- Packaging: Standard PVC Sliding blister card

&quot;FREE&quot; shipping cost arranged by &quot;First Come First Serve&quot;. Valid to 31 Mar 2018 for samples ordering only.

Socket Tester

 Key Specifications/Special Features: 
- Non-contact AC voltage detection&nbsp;
- Telescopic length 1.3M&nbsp;
- Check AC voltage :&nbsp;
* Behind the wardrobe&nbsp;
* Inside false ceiling&nbsp;
* Under ceiling&nbsp;
* Low location or ground floor&nbsp;
- No need to bend down while checking&nbsp;
- Battery powered :&nbsp;2 x 1.5V (L736 / LR41 / AG3)&nbsp;
- Dimension (LxWxD) mm : 174x26x11
- Worldwide patent pending&nbsp;
- Originated, designed and developed by MEET

&quot;FREE&quot; shipping cost arranged by &quot;First Come First Serve&quot;. Valid to 31 Mar 2018 for samples ordering only.
&nbsp;

AC Voltage Detector

 	 Simple and easy to test the life of battery 	 Test batteries on and off the vehicle 	 Accurate results in milliseconds 	 Battery Life Analysis 	 Analysis Result : Good or Replace 	 Large easy to read LCD display. 	 Test results based on JIS, EN, DIN, SAE and IEC Standards. 	 Languages: English, Spanish, French, German, Italian, Polish 	 Quick test&mdash;input battery volume (AH), then it can show the battery status. 	 vehicle cranking system test--- cranking time, voltage and status. 	 vehicle charging system test&mdash;load voltage, unloaded voltage, ripple status and charging system status. 	 Store the testing result, print function 	 Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major battery standards JIS, SAE, EN, DIN and IEC are supported. 	 System voltage: 12 Volts 	 Input voltage range: 9V~15V 	 Power requirements: No internal batteries required. Power on when hooked up during testing. 	 Testing range: 100 ~ 2000 CCA, 100 ~ 1000 DIN, 100 ~ 1000 IEC, 100 ~ 1700 EN 	 AH range: 30-220AH  

12V Auto Battery Tester

 Key Specifications/Special Features: 

- tests all types of 1.5 and 9V batteries&nbsp;
- tests D, C, AA, AAA, N, 9V and Button Cells&nbsp;
- adjustable sliding arm for different size of batteries&nbsp;
- Battery powered : 1 AAA (R03 / LR03 )&nbsp;
- Dimension (LxWxD) mm : 83x38x19
- Worldwide patent pending&nbsp;
- Originated, designed and developed by MEET

&quot;FREE&quot; shipping cost arranged by &quot;First Come First Serve&quot;. Valid to 31 Mar 2018 for samples ordering only.

Bar Graph Display Battery Tester

 Key Specifications/Special Features: 
- Test general and rechargeable battery with &quot;on-load&quot; from 1.2V to 12V&nbsp;
- Dual results indication of voltage (V) and capacity (%)&nbsp;
- Tests battery type :&nbsp;
* AA, AAA, C, D, N (1.2V / 1.5V)&nbsp;
* Button cell (1.2V / 1.5V)&nbsp;
* Coin type (3V)&nbsp;
* Lighter / Remote (6V)&nbsp;
* Radio type (9V)&nbsp;
* Lighter / Remote (12V)&nbsp;
- Selective switch for individual &quot;on-loading&quot;&nbsp;
- Auto power off with mains power off switch&nbsp;
- Low battery warning&nbsp;
- Adjustable sliding arm for different size of batteries&nbsp;
- Battery powered :&nbsp;2 x 1.5V (L1154 / LR44 / AG13)&nbsp;
- Dimension (LxWxD) mm : 128x45x20
- Worldwide patent pending
- Originated, designed and developed by MEET

&quot;FREE&quot; shipping cost arranged by &quot;First Come First Serve&quot;. Valid to 31 Mar 2018 for samples ordering only.

Battery Tester

石家莊數英儀器有限公司

 	 Complying to IEC61000-4-30 Class S Standard. 	 Sample rate: 20kS/s&nbsp; 	 Input: 4 (3 phase+neutral) DC coupling 	 Arms (AC): max 5000A 	 Can measure dips &amp; swells, harmonic, power and energy, flicker, unbalance, voltage transient, inrush current, logger.  

Power Quality Analyzer SA2100

 	 Complying to IEC61000-4-30 Class A Standard.&nbsp; 	 Input: 4 (3 phase+neutral) DC coupling.&nbsp; 	 Vrms(AC+DC): 1~1000Vrms&nbsp; 	 Can test max 6000A Arms (AC)&nbsp; 	 ​Can measure dips &amp; swells, harmonic, power and energy, flicker, unbalance, voltage transient, inrush current, logger.  

Power Quality Analyzer SA2200

Shenzhen Everbest Machinery Industry Co., Ltd. (CEM)

 	 Safe CAT IV-1000V rating and toolbox tough with rubber reinforced case and buttons and low-profile detection tip Vibration and red LED alarms alert users to the presence of voltage in noisy areas Versatile High/Low sensitivity modes detect voltage on industrial equipment and low-voltage installations Powerful LED worklight always ready to illuminate poorly lit locations Inspection light at the probe tip facilitates testing in dark areas IP67 Waterproo  

Voltage Testers

康泰電氣有限公司

 Featured is a high-quality voltage tester with a range of up to 250V AC. The tester is well insulated for enhanced safety. This excellent voltage tester is widely used on wall sockets, lamp holders, circuit breakers, cords and cables.     Tester range: 200V to 250V AC.   Reliable performance.  

Voltage Tester

科泰儀器（昆山）有限公司

This voltage tester can automatically detect AC/DC voltage and does not require switching the testing range. The voltage tester comes with vibration alters as soon as it detects dangerous voltage levels. It is equipped with a mini flashlight to illuminate the working environment. 	 Audible continuity alerts. 	 Bright LED indicator voltage reading. 	 Vibration alerts for dangerous voltage levels. 	 Flashlight to illuminate the working environment. 	 In accordance with CAT IV 600V safety standard. 	 Powered by 3 AAA batteries. 	 Weight: 230g. 	 Voltage: 0-600V.  

Featured here is a function and arbitrary waveform generator with a user-friendly interface. It is well engineered to deliver high-precision performance. It has perfect modulation functions including FM, AM, PM, PWM and FSK. 	 Dual outputs with same features. 	 1&mu;Hz frequency resolution. 	 Frequency range up to 20MHz. 	 100MHz frequency counter. 	 Standard interface of USB host and USB device. 	 Any waveform adjustable. 	 Rectangular housing. 	 With a stand at the bottom. 	 User-friendly interface. 	 Economical and lightweight. 	 Deliver high-precision performance. 	 Perfect modulation functions including FM, AM, PM, PWM and FSK.  

Function & Arbitrary Waveform Generator

This voltage tester comes in the design of a screw driver for ease of use. The quality conductor is built to assure accurate detection and measurement. The voltage tester is a brilliant troubleshooting tool for electronics technicians.   Packaging: 1set per blister.   Testing range: 200 to 250V AC.  

我的採購