零件，組件和原材料

品藝高制造廠有限公司

   POWER SOURCES : 100 - 240VAC~50/60 Hz 100Ma   OUTPUT POWER : 14.5VDC = 150Ma   DIMENSIONS : 178 x 78 x 325mm (WxDxH)   NET WEIGHT : 1.72 kg   APPLICATION : INDOOR USE only; For Industry, Warehouse, Personal Care, Residence, Commercial and Agribusiness.   PACKING :Gift box packing for 1 piece.  

Home Protector Alarm

廣州笙達電器有限公司

The home audio system can play sounds of iPods and iPhones as well as FM radio programs. It can be manipulated easily via a full-function remote control. It complements your audio entertainments with high-fidelity sounds.
 
  20 channel and 6 channel shortcut keys. 
  RCA 3.5mm audio input. 
  USB MP3/SD card slots. 
  Output power of the power amplifier: 20W x 2RMS (1kHz 1% THD). 
  Speaker driver: 4&quot;x2. 
  Impedance: 4 ohm. 
  Built-in EQ mode. 
  Clock and&nbsp;alarm functions. 
  Net Weight: 15kg. 
  Gross Weight: 16kg. 
 

Home Audio System

宏オ拓展有限公司

This pull string and magnet alarm is designed to ensure safety of the elderly or patients. Unplugging the magnetic cord activates the alarm to emit loud alert sound with bright LED light, while alert can be turned off by replacing the magnetic contact switch. The alarm is designed to operate with long wireless transmission rage with low power consumption.&nbsp; 	 Simple to use 	 Just to unplug the magnetic sensor, the device will produce an super loud alarm sound and a warning light at the spot.&nbsp; 	 Return the magnetic contact switch to stop alarm sound and flashlight. 	 Super bright LED flashlight and loud siren at 100dB
	IP3X Water splash-proof designed enclose
	Individual button to control each function includes Power On/Off, Transmission, Flashlight, Siren Alarm 	 Able to transmit wireless signal to the wireless receiver.&nbsp;SUB-1G RF frequency with wireless transmission range up to 300m / 1,000ft (direct line of sight) 	 Low power consumption and long transmission range. 	 Compatible with the Multi-Alert receiver: MA-1000, DCX-900, DCX-800, DCX-25, DWA-800 	 Operated by DC batteries AAA x 3.  

Wireless Magnetic Pull Alarm

警報城市有限公司

The Fall Detection - Emergency Transmitteris a wearable device that's ideal for hospitals, elderly homes &amp; individual homes. It can be worn as a wristband TXP-11(V2) or pendant TXP-11. Designed for the care of elderly, disabled and handicapped persons. Worn as either wristband or pendant, and allow patients to call for emergency alarms. Programmable automatic fall-alert is available Features of TXP-11(V2) • Active emergency button sends signal to central monitor or feild receiver • Lanyard option with anti-ligature point (not included) • Acceleromater to trigger call in case of patient fall (recommended for wristband only) • Reset signal triggered using magnetic switch • Changeable battery - uses CR2450 • Waterproof to IP65   

Fall Detection Wristband (With Panic Call Button) Emergency Transmitter

  Anti-Wandering Door Monitor  
The system will help caregivers watch over patients who are at risk for wandering. It immediately alerts caregivers when patients wearing wristband tags move within range of protected doors, providing an audible and visual alarm.&nbsp;It functions with just a door alarm and a resident wristband. Mount the door monitor alarm by any exit or doorway in your care facility, plug it in and place wristband on resident.

  The 2 basic components are : &nbsp;  	 A door strip sensor (DMS-02) to be affixed next to protected door&nbsp; 	 Patient wristband transmitter (TXP-02)&nbsp;    Features :   	 Immediate audible and visual alert when patient wearing wristband transmitter move within the range of protected doors 	 Easy installation with easy range setting 	 Option to connect with door lock when alarm is triggered 	 Low battery detection 	 Multiple reset options available 	 Programmable wristband coding&nbsp; 	 Can be used for a single door, or with a central monitor to watch over a larger area 	 If central monitor is used, the door strip sensor is automatically fault-checked to ensure operations 	 Wristband with unbreakable strap is available for option  

Anti-Wandering Door Monitor

保迪安興盛實業有限公司

CD-272 is a dual function device that combines Cellular Dialer and Gate Opener in one unit. It is compatible with all Alarm Control Panel and Access Control Keypad for feature enhancement. It can make alarm report to 5 preset phone numbers and remote control the access control keypad via mobile App "Gate Plus". Dialer &amp; Gate Opener Common Features Master Code for System Feature Programming AuthorizationMaster Code, Owner's Contact Phone Number, System Operation Mode and SIM Card Testing Interval Settings are Authoried with (MSA) Switch (Master-Setting-Authorization)Programmable 1-6 Weeks SIM Card Active TestingDialer Performs Signal Strength Testing with SMS Testing CommandFunction and Feature Programming with SMS from Mobile PhoneMaximum 30 Characters Including Space SMS TextExecute Dialing Immediately for Alarm Notification after Opener Comment Finish While System Has Been Busy in Dialer + Opener Mode. Dialer Section Five Telephone Numbers (1 Owner + 4 Auxiliary) for Receiving Alarm SMS and Ring Call. The Owner Number Also Receives System Status SMS.Telephone Number Can be 30 Digits MaximumThree Alarm Notification Formats: 1) SMS + Ring, 2) SMS Only, or 3) Ring OnlyTwo Isolated Input Terminals for Alarm Event Triggers. e.g. Burglar, Fire or OthersInput Terminals Independently Selectable for Ring Only to Prevent SIM Card ChargesInput Terminals Response Time Programmable between 1-10 Seconds to Prevent Arm-Disarm Ring Back Signal or Interference from External Alarm Control PanelProgrammable Inactive Timer after Dialing Prevents Undesirable Repeat TriggeringOne Alarm Output Relay with NC and NO Output Contacts to Drive External Device Gate Opener Section Operate with or without Authorization Phone Number1000 Authorization Phone Numbers Maximum to Operate The Gate OpenerText to Open for Pedestrian GateText to Keep Main Gate And Pedestrian Gate Temporarily Open with Super User CodeText to Temporarily Stop Operation of The Opener Section During The Time of After Office Hour or Nobody at HomeTwo Relay Outputs for Main Gate (O/P 1) And Pedestrian Gate (O/P 2) ActuationRelay Outputs Are Programmable for 2 – 60 Seconds (default 2 sec)Two Auxiliary Egress Button for Main Gate and Pedestrian Gate Actuation for Emergency Case

Cellular Dialer + Gate Opener

泰利時(遠東)有限公司

Featured here is an anti-tamper dual alarm that can be reset and suspended by infrared remote control. The rubberized housing offers protection against damage caused by dropping onto hard floors. A versatile mounting base and hanger are included for convenient attachment.
   Versions for pull cord operation or with optional sensor pads.   Nurse-call versions will connect to other systems for remote alarm signaling.   &quot;Suspend&quot; mode allows patient repositioning with adjustable stand-by time.   &quot;Reset&quot; mode puts the alarm into stand-by situation until re-activation by next use.   2 alarm sounds and low or high volume settings.   &quot;Silent&quot; mode for use with remote alarm signaling nurse-call systems.   4-digit ID code to match remote control to alarm and eliminate interference.   Easy cleaning of pull cord.  

Nursecall Anti Tamper Dual Alarm

This wireless driveway alarm system alerts you when a vehicle or a person arrives on your property at the driveway. The outdoor sensor is designed to operate wirelessly with great sensitivity. The alert system is ideal for monitoring vehicles in both home and business settings upon entering and exiting. Multiple types of transmitters are available for your selection.&nbsp;

Each set includes 1 pieces of Wireless Driveway Alert Sensor and Wireless Driveway / Multi-Alert Receiver. 	 detects a person or vehicle and alert you when approaches your home or premises. This alert system is suitable for driveways, business premises or back entrances. 	 The whole alarm set is simple DIY and user friendly to set up. It&rsquo;s recommended to add other sensors / transmitters to expand the system. 	 SUB-1G RF frequency with wireless transmission range up to 300m / 1,000ft (direct line of sight)  
 Wireless Driveway Alert Sensor (Transmitter) (DWS-100)  	 Detect motion up to 12 meters 	 Adjustable sensitive to ignore false alarms and small animals 	 Includes narrow aperture lens to reduce the detection distance and to narrow the detection angle 	 Includes sun shades to eliminate false from moving brushes and direct light 	 Easy installation and have adjustable swivel bracket 	 LED indicator that shows it is working during set up 	 IP 45 water splash proof housing&nbsp;   Driveway / Multi-Alert Receiver (DWA-800)  	 Monitors 4 zones and each zone can pair up-to 4 sensors / transmitters (max. total 16 sensors) 	 90dB loud and clear sound with 32 melodies for selection 	 2 replays output and adjustable activation time 	 With Power on / off and adjustable volume control 	 Low battery indicator  

Wireless Driveway Alert

After paired with the Multi-Alert Receiver such as DCX-25 or DCX-800, the wireless call button can transmit a wireless signal to receiver when the button was pressed.
&nbsp; 	 It can be wall mounted or table stand 	 SUB-1G RF frequency with wireless transmission range up to 300m / 1,000ft (direct line of sight) 	 LED Lite-on to indicate at transmission 	 Powered by 1pc of CR123A with long battery life 	 Compatible with&nbsp;Multi-Alert receiver : MA-1000, DCX-900, DCX-800, DCX-25, DWA-800  

Wireless Call Button

TAT Electronics Co.,Ltd

 	 Rated Voltage: 5V 	 Operating Voltage: 1-25V 	 Sound Output at 10cm: 85dB 	 Resonant Frequency: 4000Hz  

Piezo Transducer

珠海富景科技有限公司

 	 Include 1,000,000 wireless code combinations 	 Safe and reliable 	 Totally wireless configuration 	 Automatically 	 DIY pair to add unit 	 Easy to operate 	 Low power consumption 	 Low voltage indicator 	 Long endurance life  

Wireless Alarm Kit

  Passive Infrared Sensor  
An alternative to sensor pads in bed monitoring. The PIR alarm has a thin, curtain-like motion detector beam, which monitors a narrow area beside the bed. When the beam is interrupted, the sensor detects motion and triggers the alarm. As with all contactless devices there are no infection control issue. The PIR sensor can be set up as an stand-alone alarm unit, or forward signals to a fall monitor or caregiver pager to remove&nbsp;in-room&nbsp;alarm noise.

  Features :  &nbsp; 	 LED status indicator (Red - Alarm / Blinking Red - Low Battery / Green - Pause) 	 Can be set up as an stand-alone alarm unit (Internal alarm) 	 Wireless works with a fall monitor, pager or central panel. Range up to 200m (600 feet)&nbsp;&nbsp; 	 Pause mode allows caregiver to tend the patient without triggering an alarm 	 Automatically re-arms if no movement is detected in 15 sec. 	 Easy reset button 	 Adjustable detection range 	 Horizontal or vertical detection options 	 3xAA type battery operated 	 Low battery alert 	 DC (6V) input option  

PIR Sensor

 	 It can be installed in kitchens to detect the increase in temperature from a fire. 	 Packaged  

Heat Alarm

HA-268-CS is the 6 zone compact alarm kit with auto-dialer. Featuers: One stop shopping gets a perfectly matched alarm system.The alarm kit is prepared for people to get an alarm system with the perfectly matched components in one stop shopping for home and office protections. The HA-266-CS is a 6-Zone system with built-in auto-dialer and communicator. The system kit consists of the following components andit is expandable.One HA-266 standard alarm control panel.One PIR-2712 passive infrared motion detector.One ES-12W electronic siren.Five MC-01 magnetic contacts.One PB-01 panic button.One AP-960 12VDC/1.5A power adaptor.The size of the package: 320(W) x 146(D) x 300(H)mm.

Alarm Kit

 	 GUARDMAN&reg; Fall Management Monitoring System is an ideal product for elderly or patient care. 	 It provides an early alert signal to the caregivers or family members when the elderly or patient to call for help easily. 	 The wireless transmission range is up to 300m / 1,000ft (direct line of sight). 	 Chair Sensor Pad: 15&quot; x 10&quot;, Bed Sensor Pad: 30&quot; x 20&quot;.  

Fall Management Monitoring System

無線呼叫按鈕照顧員套裝是尋求幫助的便捷工具。當患者需要協助時，只需按下按鈕，便可向接收器發送無線信號以提醒護理人員。 SUB-1G射頻頻率，無線傳輸範圍高達300m / 1,000ft（直接視線）簡單易用，按下按鈕便可將無線信號發送到接收器附有掛繩的無線呼叫按鈕，可以手持、掛於頸上或貼在床頭上。便攜接收器內置皮帶夾，可讓護理人員隨身攜帶接收器最多能配對4個不同的感應器

無線呼叫按鈕照顧員套裝

Under-Mattress Sensor Pad is our new generation of sensor bed pad series which provides a comfortable, reliable &amp; invisible option for non-intrusive bed monitoring. Coupled with our wireless / wired bed monitors, it detects patient's presence on the mattress &amp; alerts caregiver when a patient gets off from bed. The sensor pad is placed under the mattress. Fits onto the center panel of most elderly care beds. It functions unnoticeably under the mattress with low hygiene risk &amp; less body contact problem. Designed for the care of elderly, disabled, and handicapped persons. Sensorpad triggers an alert when patient exits their bed, works beneath most foam mattresses. USB connection for transmitter or cable Features : • Triggers alarm when patient exits their bed• Usable with either cable or transmitter• Eyelets for securing to a bed frame. Works best under foam mattresses 14-16cm inches thick• Durable and long-lasting - 18 month warranty• Care instructions written on pad• 100% latex free Technical Specifications Standards Cable:2m with RJ10 plug (NO) and USB break point Material: PVC &amp; PET Dimensions: 83 x 26cm Net weight: 620g Operating temp.: 5°C to 40°C Operating weight:30 - 200kg Internal resistance: &lt; 1200 Ω Recommended cleaning: 1:100 solution of household bleach (5.25 - 6.15% sodium hypochlorite) 

Cordless Under Mattress Bed Sensor Pad

  Cordless Floor Sensor Mat&nbsp;(CMAT-02)  
The cordless non-slip floor mat for fall management will send an alarm signal when pressure is applied by stepping upon it. It reduces injuries from falls and alerts caregiver when resident needs help.&nbsp;

  Features :   	 Trigger alarm when pressure is applied&nbsp; 	 Cordless to remove a tripping hazard 	 Size : 48&rdquo; x 24&rdquo; (122 x 61cm) 	 Heavy duty &amp; non-slip material&nbsp; 	 Constructed with durable vinyl cover, latex free 	 Must work with our wireless transmitter (TM-11)  

Floor Sensor Mat (Cordless)

  LED Indicator Light   are the nurse call system&rsquo;s basic device for visually signaling the patient calls to medical personnel in corridors. It is mounted above (or next to) the doorway of each patient room or installed at corridor intersections to denote a zone of rooms, the indicator light will produce a bright light and tone that is easily seen and heard both at great distances. As a result, nurses and staff members are quickly directed to the source of a call.&nbsp;

  Features :   	 Dual colored (Red &amp; White) light indication&nbsp; 	 Distinctive appearance &amp; sound, no confuse with fire alarm 	 Adjustable volume 	 Re-transmit wireless signal to extend range to pager or central monitor unit 	 Night light option to illuminate path to toilet 	 Memory for up to 15 wireless devices 	 Battery back-up in case of power loss 	 Low battery indication  

Indicator Light

 	 Chair / Bed Sensor Pad 	 Foldable Air Ventilation Pipe  

Sensor Mat

 	 GUARDMAN&reg; Anti-Wandering System is a DIY set of product to alert family members or caregivers live with elderly who has Dementia / Alzheimer&#39;s disease to run away the wireless indoor motion detector, wireless door / window alarm, wireless entry mat. 	 Any of sensors being triggered with transmit a signal to the receiver to deliver an alert sound and vibration. 	 The alert signal can notify the caregiver or family member to check the elderly immediately. Once walked out the house, the caregiver or family member can run out to bring the elderly back.  

Wandering Prevention System

 The anti-tamper car alarm is equipped with a rubberized housing for protection against damage caused by dropping onto hard floors. The compact design allows efficient use of space. The &quot;suspend&quot; mode allows patient repositioning with adjustable stand-by time.  	 Versions for sensor pads only. 	 Tamper-free resetting and suspension by infrared remote control. 	 Nurse-call versions will connect to other systems for remote alarm signaling. 	 &quot;Reset&quot; mode puts the alarm into stand-by situation until re-activation by next use. 	 2 alarm sounds and low or high volume settings. 	 &quot;Silent&quot; mode for use with remote alarm signaling nurse-call systems. 	 4-digit ID code to match remote control to alarm and eliminate interference. 	 Easy cleaning of pull cord. 	 Versatile mounting bass and hanger included.  

Anti-Tamper Care Alarm

HA-268 is an auto-dialer alarm control panel with 8 hardware protection zones and 2 software zones for panic and duress alarms, which is designed for home and office protections. The system gives local alarm warnings as like the traditional alarm systems as well as sending voice message to 4 telephones of pre-set numbers when alarm occurs. The auto dialer is compatible with all the public telephone systems. The control panel comes with one control console for ready installation. Each HA-268 comes with one alarm control panel and one full feature master control console. Auxiliary control consoles can be purchased separately. Both types of consoles are back lighting and have the same function except the built-in microphone for message recording is not available on the auxiliary control console. FEATURES FOR ALARM 8 Zones, Programmable for Instant, Delay (2 delay time available), 24 Hour Instant or 24 Hour Silent Alarm ReportingProgrammable Master Code and 8 User CodesAll User Codes with Duress FunctionProtection Zones are Programmable for Single or Multiple TriggeringProgrammable Time for Exit, Entry (2 timings) and Alarm DurationArm-Disarm Control from Keypad or Remotely from Any DTMF Telephone mobile PhoneEach Protection Zone is Programmable for Response TimeExit and Entry Warning Beeps On-Off OptionsArm-Disarm Ring Back Indication On-Off OptionsInstant Arming Codes for Home and Away OperationsBuilt-in Dynamic Battery Charger and Tester with Auto or Manual Testing OptionsTwo On Board Software Zone for Panic and Duress AlarmsMaximum 4 Control Keypads Can Be ConnectedHome or Away OperationForced to Arm or Arm Prohibited OptionsHandover Option for The Instant ZonesFacilities for Driving Siren/Bell, Satellite Siren and Strobe LightPower Low Watchdog Resets SystemNon-Volatile MemoryCan be Arm-Disarmed by Conventional Key SwitchFull Feature Default Values in System for Ready Use12V / 6.5Ah Back-up Battery (Not Included)16.5VAC Operation FEATURES FOR AUTO-DIALER Four 32 Digit Telephone Numbers for Auto-DialerTwo 32 Digit Telephone Numbers for CommunicatorCommunicator Data in DTMF Format with Check-sumTone or Pulse DialingProgrammable Pause Time between Any DigitsVoice Message and Numeric Message are Possible20 Seconds Non-Volatile User Programmable Voice MessageControllable Listen-in DurationBack-up or Non-back-up Dialing for Alarm ReportingAutomatic Telephone Line Fault DetectionProgrammable Dialing Attempts, 8 MaximumProgrammable Message Repeats, 8 MaximumTelephone Numbers can be Tested Individually

Alarm Control Panel

MEINOE INDUSTRIAL (HK) COMPANY LIMITED

 	 Size: 41 x 30 x 9mm 	 Product weight: 40g 	 QTY:100pcs 	 MEAS: 37 x 35 x 32cm 	 G.W/N.W:7kgs/6.5kgs  

我的採購

確定要取消關注此供應商？

確定要取消關注此供應商？