電子產品

搜羅全球頂尖電子產品公司提供的電子產品資訊。您可在貿發網採購平台即時諮詢可靠和專業的產品供應商，以獲取詳盡的資料及報價。

電子產品供應商和製造商

Electronics

零件，組件和原材料

elec

搜羅全球頂尖零件，組件和原材料公司提供的零件，組件和原材料資訊。您可在貿發網採購平台即時諮詢可靠和專業的產品供應商，以獲取詳盡的資料及報價。

零件，組件和原材料供應商和製造商

Parts, Components & Raw Materials

Shenzhen Mingyuda Electronics Limited Company

T-shape filter is featured with small volume. High inductance and resistance coefficient. Low magnetic leakage. Large load current and good heat dissipation 

T-Shape Filter

UNIVERSAL (CHANGZHOU) ELECTRONICS CO.,LTD.

This magnetic transducer is compact in size. It is used for transforming mechanical energy into electrical energy, which consists of a magnetic field including a variable-reluctance path and a coil surrounding all or a part of this path, so that variation in reluctance leads to a variation in the magnetic flux through the coil and a corresponding induced electromotive force.
 
  Rated voltage: 3V. 
  Rated frequency: 2,731Hz. 
  Coil resistance: 15&plusmn;3&Omega;. 
  Operating temperature: -20℃ to +70℃. 
  Housing material: LCP. 
 

Magnetic Transducer

Huizhou Yongjin Electric Co., Ltd

This transformer coil features excellent wiring. It flaunts stable and reliable energy resistance. The lightweight transformer coil makes the best element for transformers. 

 
  Available in other types. 
  Long lifespan. 
 

Transformer Coil

威海震宇智能科技股份有限公司

PT1000 Temperature Sensor For Heat Meter

TSC household type temperature sensor pair are connected at one end to the temperature ball valve/pipe and the other end directly to the heat meter. Cable length of the paired temperature sensor can not be cut.&nbsp;

Technical Parameter
Heat meter RTD&nbsp;
Fitted with connection cable, PTB certification

For temperature range 0~105, direct short (DS) type
Approved to calibration regulations EN1434 as interchangeable temperature probes according to AGFW regulation FW202
Paired and with certification

Heat meter RTD is specially used for temperature measurement in closed pipe system. It is mounted in protection sleeve or ball valves and can be replaced without emptying the system after the end of the certification period.&nbsp;
The temperature sensor usually adopts a 2-wire PT100 RTD according to EN60751, Class B. PT500 and PT1000 also can be offered.&nbsp;

Remark: The certification conforms to Federal Legal Document No. 28 of 1st, August, 1996.&nbsp;

PT1000 temperature sensor instructions:&nbsp;
1. Temperature sensor of ultrasonic heat meter has two pieces (inlet and outlet). The one with red label should be mounted on inlet pipe, while the other one with blue label should be mounted on outlet pipe. Mounting position of the temperature probe should be in the center of the pipeline cross-section.&nbsp;
2. Standard wire length of temperature sensor is 1.5m, and it can be lengthened according to actual length in case of special situation when mounting, but the manufacture must be informed before ordering, and the leading wire can not be casually increased or decreased.

PT 1000 Temperature Sensor

Dongguang Chang Tai Er Electronics Co., Ltd.

Displayed is an electrical encoder that is designed to convert electrical code and signal. The built-in rotational stopper offers great endurance and exceptional durability. Enhance the stability and reliability of different types of electrical appliances with this encoder.



 
  Rotational torque: 10-80gf.cm. 
  Push-pull strength&nbsp;10Kgf.cm for 15 seconds.&nbsp; 
  Total rotational angle 300&deg;. 
  Angle of throw: 9&deg; x 40 channels.&nbsp; 
  Total resistance tolerance: 10%. 
  Contact resistance: 1&Omega;. 
  Insulation resistance:&nbsp;100M&Omega;. 
  Rotational life:&nbsp;10,000 cycles. 
  Soldering heat resistance: 350℃ at 3 seconds. 
  Operating temperature range: -30 to 60℃. 
  Voltage: 250V DC. 
 

Electrical Encoder

Benetek Limited

Wireless Temperature &amp; Humidity Sensor is based on ZigBee/SmartRoom protocol and is used to detect the indooror outdoor temperature and humidity. It will send current temperature and humidity to your smart phones and can link with Wireless IR Transmitter to control the air conditioning or humidifier to adjust the temperature or humidity to a comfortable level.

Smart Temperature & Humidity Sensor 

General Tools & Instruments Co., LLC.

Proprietary sensor with lifetime of more than 300 hours of operation (ten years of normal use) Detects all commercially available HFC, HFO, HC, HCFC and CFC refrigerants as well as blends and newly approved replacements such as R-22 and R-1234yf Triple-redundant leak indication (loud fast beep, bright flashing LED, digital leak size reading) True mechanical pump draws in samples, increasing sensitivity Three sensitivity levels Fast warmup Comfortable neoprene grip Automatic calibration and reset to ambient levels Mutable beeper Garage-durable construction Made in U.S.A. SAE J2791 and J2913 certified Complies with European standard EN 14624 CE, RoHS, WEEE approved

Digital Refrigerant Leak Detector

深圳市海駿電子科技有限公司

   This sensor is for the external installation. To attach to the outside of fixture (aluminum Louvre blocks and interfere microwave detection.).   The sensor can switch on/off halogen transformer, non-dimmable fluorescent ballast, non-dimmable LED drivers. However there is a limit of max. load due to the inrush current.  Technical data:
   Operating voltage: 220-240V+/-10%; 120-277V+/-10%.   Switched power: HC001S&mdash;400W; HC401S&mdash;800/1200W.   Standby power: 0.6W (standby), 1.2W (operation).   Detection area: 10/30/50/75/100%, can be customized.   Hold time: 5s/30s/180s/300s/15min/25min, can be customized.   Daylight threshold: 2-500 lux, daylight/twilight/darkness, can be customized.   Sensor principle: microwave motion detector.   Microwave frequency: 5.8GHz+/-75MHz.   Microwave power: &lt;1mW.   Detection range: max. (diameter, height) 8m, 10m.   Detection angle: 30&mdash;150 degree.   Motion detection: 1-20km/h (&lt;3m mounting height); 1-200km/h (&gt;5m height).   Mounting height: 0.5~100m.   Operating temperature: -35~70 degree.   IP rating: IP 20 (mounting inside a lamp); IP65 (mounting in Hytronik special box).  

Attachable Version Microwave Motion Sensor Detector

   This sensor has exactly the same function as the standard version. It is a simplified economy model to the standard version and it is designed for built-in compact lighting fixtures for indoor application.  Technical data:
   Operating voltage: HC008S&mdash;220-240V; HC108S&mdash;120V.   Switched power: HC008S&mdash;400W; HC108S&mdash;200W.   Standby power: 0.6W (standby), 1.2W (operation).   Detection area: 10/30/50/75/100%, can be customized.   Hold time: 5s/30s/180s/300s/15min/25min, can be customized.   Daylight threshold: 2-500 lux, daylight/twilight/darkness, can be customized.   Sensor principle: microwave motion detector.   Microwave frequency: 5.8GHz+/-75MHz.   Microwave power: &lt;1mW.   Detection range: max. (diameter, height) 8m, 5m.   Detection angle: 30&mdash;150 degree.   Motion detection: 1-20km/h (&lt;3m mounting height); 1-200km/h (&gt;5m height).   Mounting height: 0.5~5m.   Operating temperature: -10~60 degree.   IP rating: IP 20 (mounting inside a lamp); IP65 (mounting in Hytronik special box).  

Economy Version Microwave Motion Sensor Detector

   This sensor has exactly the same function as the economy version. It is a simplified cost effective model to the standard version and it is designed for built-in compact lighting fixtures for consumer home lighting application.  Technical data: 
   Operating voltage: HC004S&mdash;220-240V; HC104S&mdash;120V.   Switched power: HC004S&mdash;400W; HC104S&mdash;200W.   Standby power: 0.6W (standby), 1.2W (operation).   Detection area: 10/50/100%, can be customized.   Hold time: 5s/45s/1min/3min/5min, can be customized.   Daylight threshold: 5-50 lux, daylight/twilight/darkness, can be customized.   Sensor principle: microwave motion detector.   Microwave frequency: 5.8GHz+/-75MHz.   Microwave power: &lt;1mW.   Detection range: max. (diameter, height) 20m, 3m.   Detection angle: 30&mdash;170 degree.   Motion detection: 1-20km/h (&lt;3m mounting height); 1-200km/h (&gt;5m height).   Mounting height: 0.5~5m.   Operating temperature: -10~60 degree.   IP rating: IP 20 (mounting inside a lamp); IP65 (mounting in Hytronik special box).  

Domestic Version Microwave Motion Sensor Detector

   The sensor can switch on/off halogen transformer non-dimmable fluorescent ballast, non-dimmable LED drivers. However there is a limit of max. load due to the inrush current.  Technical data:
   Operating voltage: 220-240V+/-10%; 120V-277V+/-10%.   Switched power: HC001S&mdash;400W; HC401S&mdash;800/1200W.   Standby power: 0.6W (standby), 1.2W (operation).   Detection area: 10/30/50/75/100%, can be customized.   Hold time: 5s/30s/180s/300s/15min/25min, can be customized.   Daylight threshold: 2-500 lux, daylight/twilight/darkness, can be customized.   Sensor principle: microwave motion detector.   Microwave frequency: 5.8GHz +/-75MHz.   Microwave power: &lt;1mW.   Detection range: max. (diameter, height) 8m, 10m.   Detection angle: 30&mdash;150 degree.   Motion detection: 1-20km/h (&lt;3m mounting height); 1-200km/h (&gt;5m height).   Mounting height: 0.5~10m.   Operating temperature: -35~70 degree.   IP rating: IP 20 (mounting inside a lamp); IP65 (mounting in Hytronik special box).  

Standard Version Microwave Motion Sensor Detector

Xiamen Kehao Automation Co., Ltd

This is a wireless temperature and humidity sensor which is widely used for air temperature and humidity monitoring in medicine, food, meteorological environment, libraries, warehouses or storehouses, equipment rooms and so on. It can also be applied for industrial automation process monitoring and researching area.
 
  High safety: safe guider built-in to ensure system safety. 
  Transmission type: wire or wireless type (option). 
  Installation type: wall and duct type (option) 
  Digitalized sensor: adopts original imported digital type temperature and humidity sensor for high measuring accuracy and high stability 
  Wire transmission type: standard RS485 communication port: only two signal wires needed, can build a multi-dot distributed network, based on the standard MODBUS-RTU protocol, can easily communicate with modern DCS, HMI, PLC, and other intelligent equipment. 
  Wireless transmission type: wireless communication networks can be achieved through current 220V electricity network, supporting standard MODBUS-RTU protocol. 
  Transmitting distance can be up to 1,500m without obstacle in an open area, with 433MHZ carrier frequency, without application for ISM frequency bands, supporting multi-signals, without interferes with multi-modules transmission. 
  Certification: CE, ROHS 
 

Wireless Temperature and Humidity Sensor

Netvox Technology Co Ltd

  &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Z716 is a temperature and humidity display. The data can be sent to a data center wirelessly.  Z716A detects temperature and humidity  Z716B detects temperature only.  &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Z716 is designed based on ZigBee Home Automation profile and utilizes ZigBee wireless transmission without the need of cabling. Z716 uses 2 AA batteries.  
 Main Features   &bull;Device type：Temperature Sensor  &bull;Protocol based on ZigBee HA  &bull;High accuracy +/- 0.5 ℃,&nbsp; +/- 4.5%RH  &bull;Compact size  &bull;Low power consumption  &bull;Low battery alert  &bull;CE/FCC certified    

深圳市敏杰電子科技有限公司

   MinJie Group is a large-scale company , R &amp; D and production of single-ended closure glass NTC thermistor temperature sensor business, the only high-volume production thermistor sealed glass enterprises in China, it produces 1,200,000 thermistor per day,is foreign investment, multinational corporations , The preferred choice of domestic industry giant, the product is widely used in multi-temperature, high reliability, high demand places.  

 MJL NTC temperature sensor

Touch International

 The projected capacitive sensor offers outstanding performance with the multi-touch technology. It comes with a glass cover for enhanced durability. This sensitive projected capacitive touch sensor is a great choice for your electronic designs. 
 
  Waterproof design. 
  Wide range of working temperatures. 
  Long lifespan. 
  Glass cover size: 3mm. 
  Suitable for digital products. 
 

Projected Capacitive Touch Sensor

Microwave Solutions Ltd

The MDU6220 motion detector unit is an X-band microwave transceiver that utilizes the Doppler shift phenomenon to the &quot;sense&quot; motion. The unit is supplied with a high gain/narrow beam antenna array and an integral microwave amplifier between the antenna and the receiver making it suitable for long range focused detection within security and energy management applications. The unit, with a lightweight plastic housing, features a dielectric resonator stabilized FET oscillator, which provides stable operation over a broad temperature range in an either CW or low duty cycle pulse mode, a low noise RF amplifier and a pair of orthogonal balanced mixers for enhanced sensitivity and direction sensing capability.
 
  High quality. 
  Available in other designs. 
 

Microwave Motion Detection Module

The MDU2000 motion detector unit is a miniature X-band microwave transceiver that utilizes the Doppler shift phenomenon to the &quot;sense&quot; motion. In fact, it is small enough to fit into a light switch for remote sensing of room occupancy. The unit, housed in a metal can, features a dielectric resonator stabilized oscillator, which provides stable operation over a broad temperature range in an either CW or low duty cycle pulse mode and an integrated homodyne receiver for enhanced sensitivity and reliability. This module family is available with either a +5V or +3V supply voltage.
 
  High quality. 
  Available in other designs. 
 

Miniature Microwave Module

Egston Eggenburger System Elektronik

  Automotive application is designed for keyless go  It is keyless entry  It contains tyre pressure sensor antennas, ABS sensors and revolution sensors  It is in black with wire winding  It is suitable for manufacturing and factory use  

Automotive Solutions

Bliss Electronic Co Ltd

  Switches and sensors: push switch, pull switch, proximity sensor, light sensor, shake switch, etc...  Customize voice or sound: available with voice ROM IC (3~320s) or OTP voice IC (10~60 s) solutions.  Housing: different sizes of standard plastic box available or custom made.  LED and EL panel: available in different flashing pattern, fade effect and size.  LED and EL panel: available in different color brigtness with colors alternation based on requests.  Power: choice of battery box for different operation time up to 3 months.  Button cells, AAA, AA, C and D type batteries.  Optional DC jack for continuing usage.  

Motion Module With Motion Sensor

Zytronic Displays Ltd

  Featured here is a projected capacitive technology (PCTtm)-based touch sensor  A fully laminated glass sensor is embedded, which encompasses the sensing medium  A highly durable, vandal-and scratch-resistant is its properties  The touch sensor has a 20ms response time  Sensor can be embedded up to 25mm from the touch surface  No recalibration is required, which makes this a drift-free operation  The touch screen features an excellent light transmission  Touchscreen can be supplied with options of anti-glare or anti-reflection coatings  Thermal-toughening or chemical-strengthening and privacy or contrast enhancement filters are added  Its sealable designs can comply with NEMA 12 or NEMA 4  The touch sensor can be operated with gloved or ungloved hand  Harsh cleaning fluids, grease and dirt cannot affect the performance of the touch sensor  

Zytouch-Projocted Capacitive Technolgy (PCTtm) Sensor

  Featured here is a projected capacitive tecnology (PCTtm)-based 50-inch rear projection product  The projection product is fully flexible, touch interactive, and captures remotely projected image  Sensor is fully flexible and can be formed around curved surfaces  Sensor thickness is 600 microns  No display is required  It can sense the touch of a finger through applications with glass surfaces up to 20mm thick  No recalibration is required, which makes this a drift-free operation  The sensor supports various thickness of front panels made of different materlals  It can take a variety of toughened glasses, including sacrificial panels  Unit of up to 100-inches is also available  

Zyprofilm-Projected Capacitive Technology (PCTtm) Sensor

Solteam Opto. Inc.

  Light sensor IC, photo reflective interrupter, turbidity sensor module, LED driver IC are offered  There is also tilt sensors available for optic signals transmit for telecom or AV  They may be used for electrical appliances at home, office, factory, phone and computer centers  

Opto-electronic Components And Sensors

APEX MATERIAL TECHNOLOGY CORP.

This projected capacitive input (PCI) touch sensor comes in a rectangular shape. The robust structure is durable and helps offer an extra-long serving time. This touch sensor is an excellent choice for making tablet computers.
 
  Easy to install. 
  Available in different designs. 
 

Projected Capacitive Input (PCI) Touch Sensor

Huizhou Greetech Electronics Co.,Ltd

This is an electronic encoder made of high-quality material for durability. It is manufactured under strict QC to promise quality you can rely on. This electronic unit also boasts a long electrical life and an extended mechanical life.
 
  24 clicks and 12 pulses. 
  Different designs are available. 
 

我的採購