電子產品

elec

搜羅全球頂尖電子產品公司提供的電子產品資訊。您可在貿發網採購平台即時諮詢可靠和專業的產品供應商，以獲取詳盡的資料及報價。

電子產品供應商和製造商

Electronics

聯益電器製品廠有限公司

2 Way switching controlMinimum dimming level adjustable switch availableFor Tungsten Lamp: Min.10W to Max.200WFor Halogen Lamp: Min.10W to Max.200WFor Dimmable LED Lamp: Min.5W to Max.100WNote: To operate LED, Tungsten and Halogen Lamp must be in Dimmable Version.Manufactured to BS StandardCE, EMC and RoHS certifiedMeets all UK and EU RegulationsDimensions: 87.5mm (W) x 87.5mm(H)Polished Brass, Premium Steel,Pure copper front plate available  Features: Classic Georgian designUltra slim flat plate made with premium steel materialThis dimmer is protected against overload and auto reset after the overload is removed and the dimmer switched off and back on.Noise free operationInclude mounting screws for easy installationFits easily and quickly into 25mm to 47mm back boxesFull fitting instructions for simple installationPolish brass and Satin brass finishes with black or white inserts available   #pushbuttonswitch, #stainlesssteeldimmerswitch, #metaldimmerswitch, #dimmerswitch, #on/offswitch, #rotarypushswitch, #lightdimmerswitch 

Georgian Profile Universal LED – 1G 2 Way 200W Dimmer

Wanlida Group Co., Limited

The wall switch occupancy sensor(SK901IE),is designed to replace the normal ON/OFF wall switch.It will detect motion from any heat-emitting source(such as a person) within its field-of-view(the area of surveillance).After the primary detector(PIR) senses presence and engages then microphonics(the sound detection system) comes into operation to keep the status of the detector as &quot;Occupied&quot; even though there is no detected motion but if any sound.The controlled lights will remain ON until no motion/sound is detected and the pre-set time-delay has expired. ELECTRICAL Line Voltage 120/277VAC Operational Frequenciea 60Hz Wire Designation Line-Black, Load-Blue Ground-Green,Neutral-White Load Rating Fluorescent:1200VA-10A/120V 2700VA-10a/277v Incandescent:800W-6.67A/120V Inductive Load:1/4hp(185W)-5.8A/120V Minimum Load 10mA ENVIRONMENTAL Operating Temperature Rang 0&deg;C to 50&deg;C Storage Temperature Range -10&deg;C to 85&deg;C Relative Humidity 20% to 90% non-condensing Agency Approval ETL/UL Listed/CSA Certified Complies with California Title 24 Energy Code Complies with FCC Regulations ORDERING INFORMATION SK901IE PIR sensor+microphonics Earth required SK901IN PIR sensor+microphonics, Neutral required SK901UN Ultr sonics+microphonics, Neutral required

UL Dual Technology Infrared Sensor Price, Occupancy Sensor

Zhuhai Ltech Electronic Technology Co., Ltd

 	 DMX Controller DX63 Input Voltage: AC100 to 240V Output Signal: RF2.4G and DMX512 Control system: 30m  

DMX Controller DX63

Our Pull Cord Dimmer Switch is designed to provide you with convenient and versatile control over your lighting. With its pull cord design, this switch allows you to turn your lights on and off, as well as adjust their brightness level, all with a simple pull of the cord. This makes it ideal for use in bathrooms, utility rooms, or any other area where you want to be able to adjust your lighting easily.  1 way 250W Pull cord dimmer switch Polycarbonate Base Available with Urea White, Polished Chrome, Stainless Steel and Polished Brass finishes Durable, practical and exceptional valueClear terminals for easy wiring and installationManufactured from quality material and componentsCeiling roses and pull cord switches available with standard urea white and metal finishesMeets BS Safety Standards  #ceilingswitch, #pullcordswitch, #ceilingpullchainswitch, #pullchainlightswitch, #lampswitch, #lightswitch, #lightceilingfixture, #easyinstall, #ceilinglight, #highquality 

Ceiling Dimmer Switch 250W 1way – Urea White

2 Way switching controlMinimum dimming level adjustable switch availableFor Tungsten Lamp: Min.10W to Max.200WFor Halogen Lamp: Min.10W to Max.200WFor Dimmable LED Lamp : Min.5W to Max.100WNote: To operate LED, Tungsten and Halogen Lamp must be in Dimmable Version.Manufactured to BS StandardCE, EMC and RoHS certifiedMeets all UK and EU RegulationsDimensions: 87.5mm (W) x 87.5mm(H)Dimensions: 147.9mm (W) x 87.5mm(H)Stainless Steel Features: Modern and sleek screwless designUltra slim metal front plate made with premium grade materialIntegral gasket for moisture protectionThis dimmer is protected against overload and auto reset after the overload is removed and the dimmer switched off and back on.Noise free operationIncludes mounting screws for easy installationFits easily and quickly into 25mm to 47mm back boxesFull fitting instructions for simple installationAvailable with 1G, 2G,3G &amp; 4G 2 Way 200W Dimmer - Rotary PushAvailable with Stainless Steel, Polished Chrome, Black Nickel, Matt Black and Chrome, Matt White &amp; Polished Brass finishes  #dimmerswitch, #leddimmerswitch, #lightdimmer,#metaldimmerswitch, #dimmableledswitch, #stainlesssteeldimmerswitch, #pushbuttonswitch, #rotarydimmer, #rotatingdimmer, #rotatingswitch 

Screwless Flat Profile Universal LED – 1G 2 Way 200W Dimmer Switch

150W Press button trailing edge dimmer moduleCE and RoHS certifiedMeets all UK and EU RegulationsStainless Steel Features: A full range of front loading grid switches and outlets modulesEasy to upgrade or replace without the need to remove the mounting frameAvailable from 1 gang to 12 gang metal front plates with Stainless Steel, Polished Chrome, Molded white and Metal Clad finishesPre-printed switch covers replaceableIdeal for domestic, industrial and commercial installationsAvailable with Matt White (MW), Chrome (CR) and Molded white (UR)  #gridsystem, #modularsystem, #powerswitch, #switchoutlet, #multifunctionswitch, #switchmodule, #pressswitch, #dimmerswitch, #freematch, easyinstall 

Press Button Dimmer Module - Stainless Steel

150W Press button trailing edge dimmer moduleCE and RoHS certifiedMeets all UK and EU RegulationsMolded white Features: A full range of front loading grid switches and outlets modulesEasy to upgrade or replace without the need to remove the mounting frameAvailable from 1 gang to 12 gang metal front plates with Stainless Steel, Polished Chrome, Molded white and Metal Clad finishesPre-printed switch covers replaceableIdeal for domestic, industrial and commercial installationsAvailable with metal finishes in Stainless(SS), Chrome(CR) &amp; Matt White(MW)  #gridsystem, #modularsystem, #powerswitch, #switchoutlet, #multifunctionswitch, #switchmodule, #dimmer, #pressswitch, #freematch, #easyinstall 

Press Button Dimmer Module - Molded White

60W to 400W 2 Way (Mains Halogen &amp; Tungsten, not suitable for LED or CFL)Manufactured to BS StandardCE and RoHS certifiedMeets all UK and EU RegulationsDimensions: 87.5mm (W) x 87.5mm(H)White Features: Standard Square Profile designHigh quality UREA thermoset materialInclude mounting screws for easy installationFits easily and quickly into 16mm to 47mm back boxesHigh quality copper contactsFull fitting instructions for simple installation  #dimmerswitch, #lightdimmer, #pushbuttonswitch, #rotarypushswitch, #dimmer, #squareprofile, #walloutlets, #thermosetmaterial, #lightadjustableswitch 

Molded White Square Profile 1G 2 Way 400W Dimmer – Rotary Push

深圳市金流明光電技術有限公司

The LEDGEAR® Digital Universal Dimmer F92001-40028301 can be used with many common, dimmable, line voltage LED lamps, high voltage halogen and incandescent lamps, electronic transformers and Kinglumi Trailing tunable white(TTW®) LED lamps. The dimmer equipped with microcontroller and suitable for use in special applications where you need to dim off. Suitable for use in both commercial and residential lighting control in flush mounted(both screw and claws) that can control a maximum load of 400 W at 230 V. With safety to EN60669, EN55015 and providing protection from over temperature, short-circuit and overload, this is a high quality product that will give you reliable protection and service. Its standby power consumption is 0.5 W and EU EcoDesign compliant. The 4in1 universal dimming allowing to works with Resistive, Capacitive, Inductive and Kinglumi TTW® lamps. It helps to reduce the inventory.  •  Device works according to the leading edge, trailing edge phase control principle; also Kinglumi Trailing TW principle •   Manual setting of the dimming principle suitable for the load •   Allows extension push-button on dimming / switching •   Dim to OFF with most LED light sources •   Switch-on with last brightness or saved switch-on brightness •   Switch-on brightness can be saved permanently •   Suitable for both retrofit and new installations •   Soft start* for customization(factory preset) only •   Permissible AC cable 0.75-2.5mm² wire gauge •   Built--in with permanent memory •   85°C Maximum case operation temperature(tc-point ¹) •   Operating temperature ¹: -20°C ~ +45°C, the humidity: 20% ~ 85% •   Five-year factory guarantee and lifetime technical support •   Switching •   Dimming •   Colour temperature tuning* (only works with Kinglumi TTW® lamps) •   Memory •   Leading &amp; trailing selectable The device provides the following protective functions: •   Inrush current limitation through soft start •   Electronic overload, over temperature protection •   Electronic short-circuit protection •   Integrated thermal fuse •  Electronic over voltage  More details, please refer to: http://www.kinglumi.com/product-1863.html Unboxing of dimmer: https://youtu.be/zUDx61SCw5c SUBSCRIBE to Kinglumi: https://www.youtube.com/channel/UCPY3y9WvRkeWiJOXYUgv2Pw  

Digital Universal 4in1(RCL) Rotary Dimmer with Tunable White

偉盈國際實業有限公司

DIM: 30.5 X 4.3CM AUTO LIGHT SENSOR CONTINUE LIGHT ON SELECTION GREEN LED BACKLIGHT AC-DC ADAPTOR 3.V (OPTIONAL) 4PCS AA SIZE BATTERIES 

LIGHT SENSOR WALL CLOCK MODEL NO.: WS692SP 

寧波海曙浩然燈具有限公司

 	  Item no.:  HL-B11-5012A, HL-B11-5012B, HL-B11-5013A, HL-B11-5013B 	  Input voltage:  DC12V 	  Rated Current:  4.16A 	  Rated load:  Max 50W 	  Material:  ABS 	  Size:  44X33mm 	  Certificate:  CE 	  IP:  20   Function:   	 Touch switch for wood,on/off&nbsp; wood thickness 30-40mm (Item no.:HL-B11-5012A, HL-B11-5012B) 	 Touch switch for mirror,on/off +Dimming (Item no.: HL-B11-5013A, HL-B11-5013B)  

Wood & Mirror Switch 

 	 Input Voltage : 12V/24V 	 Wattage :12V 3A 36W,24V 3A 72W 	 Function /Feature : ON/OFF Dimming 	 Size : 54.5 x 22.5mm  

Dimmable Switch 

 	 Input : 12V/24V 	 Output : 12DC 	 Power: 36W 	 Function : on/off Dimmiing 	 Size : &Phi;18&times;15mm  

Surmountor Lighting Co Ltd

Internal IR Hand Sensor Switch + dimming + memory &gt; Size 55mm x 10mm, Drill Hole Φ8MM &gt; 12VDC- 24VDC &gt; Max Current 8A. &gt;Power: 96W for 12V, 192W for 24V &gt;Detection Distance 0.5~10CM Light will turn on/off when hand is passing over the sensor, dimmable when keeping covering 

IR012D Internal IR Hand Sensor Switch ,dimming ,memory for light switch

(touch wood/glass panel, max 25mm thickness) Touch switch on/off +free dimming+memory &gt; Size: L41*W31*H9MM &gt; Voltage &amp; Current: 12-24VDC, 4A Max. &gt; Input cable: 5521 DC Female connector with 15CM wire &gt; Output cable: 5521 DC Male connector with 15CM wire 

TD006  Touch Sensor Switch 12-24V DC Dimming Sensor

Touch switch ON/OFF + Free Dimming+Memory &gt; Input Voltage: 12-24VDC, Current: 2A max. &gt;Size: H15MM*D19MM &gt;Cable length: 1m with mini connector. &gt;Quick touching: Switch ON/OF; Holding touching: Dimming. &gt; Input cable: L813 connector with 1meter wire &gt; Output cable: L815 connector with 1meter wire 

TD008  Touch Sensor Switch ON/OFF, Free Dimming, Memory sensor

Siqi Technologies (Shenzhen) Co.,Ltd

The D1 Deconstruction series switch balances complexity and simplicity. Inspired by the Soviet Constructivism style, it breaks down and scatters its overall integrity to create an asymmetrical but proportionally harmonious form. This coincides with the popular deconstruction of the 20th century and is named ‘Deconstruction’ in tribute to it. It cleverly uses white space, various materials and colors, to make the panel and space achieve a seamless harmony of function and aesthetics. The wireless remote scene switch is battery powered and no wiring required. It has a built-in magnet that can be attached to ferrous metal surfaces (such as refrigerators, iron cabinets, etc.), or it can use a magnetic backplate to attach the switch to glass, wood veneer, wall surfaces and other media surfaces.The knob design can be used as a control panel for a single scene, such as controlling the brightness, color temperature and color of lights in different zones. It can also be used as a multi-in-one comprehensive control panel (supporting up to three devices simultaneously for linkage control, such as temperature control, lighting and curtains), increasing the richness and convenience of local control. This eliminates the cumbersome experience of using a mobile phone to control it and makes interaction more intuitive. 

D1 Series

Zhongshan Gonghua Lighting Electrical Appliances Co.. Ltd.

501switch wire/Dimmer/Color temperature regulator

Jiangsu Barep Smart Technology CO.;Ltd

This product is an in-wall non-intelligent single fire dual-control dimmer switch. The two dimmer buttons support brightness plus and brightness minus dimming respectively, and the dimmer button has gear dimming and infinitely dimming. The power button can switch on and off the dimmer light. This product has a device reset function, by long-pressing the reset button for 3 seconds to reset the product. No neutral wire required. It can be used as a single control dimmer switch or a dual control dimmer switch. This product is mainly used in lighting places, such as basements, offices, homes, and other places. It is compatible with incandescent, fluorescent, halogen and LED lights. 

Dimmer switch 

麗光科技股份有限公司

0-10V Dimmable &amp; TunableConnect Fixture to BLTC NetworkSPECPart NumberInput VoltageTransmission RangeOperating EnvironmentBLI-ET-V12-BT0112V AC/DC15-30M-20°C~45°C 5~80%RH 

0-10V Dimmable & Tunable Adapter

Kin Yuan Enterprise Co Ltd

FeaturesModular dimming mechanismSoft start function to protect the lampOver-temperature, over current protectionProvide optimised dimming of LED based lamps and driversImmune to high frequency (ripple) signal injection on mains supplyWith Min. and Max. brightness adjustment, to achieve the optimum dimming range for a particular loadRated Voltage   AC 220-240 V / 50Hz Connected Load  5VA - 400VA (1 - 15 LEDs, 150W max.) Minimum Load  5VA Dimming Method   Trailing edge phase control ﻿Push button and ON/OFF switch Type of Loads  Dimmable LED Light 220 - 240V AC Incandescent lamps Connection   Screw terminals 

我的採購