電子產品

elec

搜羅全球頂尖電子產品公司提供的電子產品資訊。您可在貿發網採購平台即時諮詢可靠和專業的產品供應商，以獲取詳盡的資料及報價。

電子產品供應商和製造商

Electronics

深圳市鴻偉高能科技有限公司

 This emergency module can transform your LED lights into reliable emergency lighting sources. This versatile device can work with tubes, panel lights and downlights. With great practicality, this module is great for most settings. 
 
  Voltage: AC 100-265V 50-60Hz.   
  Self consume power: 5W.   
  Battery charging: 24 hours.   
  Discharge current: 2A.   
  Suitable light source: LED tube, LED panel, LED downlight.   
  Battery specification: high temp NiCD/NiMH battery.   
  Environment temperature: -10+55&deg;C.   
  Highest surface temperature: 70&deg;C.   
  Battery protection device equipped. 
 

LED Tube Emergency Module

Antron Electronics Co., Ltd.

Antron constant power emergency LED driver provide10W output powerwith15-55V output voltage. The EMB pack maintains the same output wattage level during emergency mode. Moreover, the LED emergency battery pack can work with any AC drivers with maximum 5 amp output current. The benefit of delivering constant power is to keep the same level of lighting illumination. The LED emergency backup driver contains high quality LiFePO4 battery and DC inverter. Under most emergency situation, the power shuts off. This will automatically trigger the constant power EMB unit switching to emergency mode. During emergency mode, the battery enclosed in the EMB will start providing power to the DC inverter. It transfers to constant power output and maintains at 10W to 20W output power under emergency mode. Antron emergency LED pack series provide power to your LED lighting fixture that will last forat least 90 mins. Last but not least, Antron emergency battery backup LED driver isUL listed &amp;BC certified. It also meetsCEC title 20 approval. Providing safety and high quality emergency driver is our mission! 

Constant Power Emergency LED Driver

深圳邁睿智能科技有限公司

 	 The MC054V&nbsp; RC sensor is an innovative and active motion detectors with HF system 5.8 GHz. Motion can be detected through plastic, glass and thin non-metal materials. And the higher mounting height 15m Max. 	 The infrared remote controller design makes the customer to adjust the parameters of the sensors easily. 	 When used in combination with 0-10V dimmable LED drivers or ballasts, they can achieve 3-step dimming function,which is perfect for use in some areas that requires a light change notice before totally switch off.  

Microwave Motion Sensor

朗怡國際有限公司

Gaming Mouse Pad with LED Light up Edge Black 13 Colors RGB Gaming Mousepad Input: 5V/1A7 Kind of Monochromatic lights6 Kind of RGB running lampAnti-slip functionWeight: 145gProduct Size: 220*320*3mmPackage: 1*Mouse Pad1*USB Charging Cable1*User Manual1*Color Box (Normal CMYK print)

Gaming Mouse Pad with LED Light up Edge Black

弘欣光電企業股份有限公司

This power supply is specially designed for high-power LED loads. The low profile and light weight allows easy portability. With the short circuit and overload protection, it provides complete safety for usage.
This functional power supply is UL and CE approved. 	 Functional and easy to operate. 	 Available in different designs. 	 our M series is available from 9W to 38W  

High Power Constant Current / Voltage LED Driver with ELV Dimmer

優源科技股份有限公司

AC I/P : 100-240V DC O/P : 12V ~24V / 0.25A ~ 0.5A  Protection  Over Circuit Protection  Over Voltage Protection  Over Current Protection  * Safety : PSE, FCC , CE  * 60950-1 / 61347-1 / 62368-1  * Corresponding CV mode, we support customized for C.C. &amp; C.V. mode &amp; C.C. model only.   * Please contact us to get details information. 

5W ,12W , 18W, 24W &  32W Adaptor for LED Lights Use, Switching Power Supply for most of LED Lighting

明緯香港控股有限公司

Matter over thread, Matter 1.3 specificationConstant power mode output with multiple stage selectable by DlP switch (H-type)Constant voltage mode output(12/24/48V)Plastic housing with class ll and PFC designFlicker free, complying with CE ErP directiveMeet emergency lighting (EL)applicationMinimum dimming level 0.1%(12/24/48V) / 0.5% (H-type)Built-in antenna design for easy installation5 years warrantyENEC/CCC/EAC/UKCA/CB/CE 

XLC-MA Series: 25W~60W Matter Wireless Dimmable LED Drivers 

·DAL1-2 DT6(Dimming) or DT8 (Tunable white/RGBW) control available ·Constant voltage PWM style output with 1 or 4 channels ·Standby power consumption &lt;0.5W ·Function options:3 in 1dimming/DALl-2+PUSH Dimming ·Slim and Linear housing Design, terminal block wiring ·Built-in active PFC function·Class Ⅱpower unit，no F.G. ·Protections: Short circuit / Overload /Over voltage / Over Temp. ·Minimum dimming level 0.1%·Cooling by free air convection ·5 years warranty The series is expected to be launched by the end of December. 

Slim Constant-Voltage Dimmable/Tunable White & RGBW Control LED Driver

50~150WConstant voltage+ constant current mode output·Universal Ac input:110~305VAC.Built-in active PFC function.Plastic housing with Class ll designClass 2 power unit (Except for SLD-80-12)Slim and linear housing design·Meet with BS EN61347/EN60335 regulations.No load power consumption&lt;0.5WProtections: Short Circuit/Over Current /Over Voltage / Over Temp.3 years warranty(SLD-50/80)5 years warranty(SLD-150)UL/ENEC/CCC/EAC/UKCA/CB/CE

Slim type low profile Switching Power Supply / LED Driver - SLD series

Constant power mode output with multiple stage selectable by ETS databaseFlicker free, complying with CE ErP directiveKNX/ElB protocol, support KNX data secureMeet emergency lighting (EL) applicationMinimum dimming level 0.5%Built-in constant illuminance output function (ETS provides three presets L70/L80/L90 and customization)Built-in independent KNX push dimming interface5 years warrantyENEC/CCC/EAC/UKCA/CB/CE

XLC-KN Series: KNX Data Secure Constant Current LED Driver

· Constant power mode output (XLG-20~320)· Constant current mode（XLG-20 only）·Full power at 70~100% current·Universal AC input: 100~305VAC·Metal case with IP67·Built-in active PFC function·Class 2 power unit (XLG-20~100)·Surge protection with 6KV/4KV (10KV/6KV available)·India (EESL) version with input over voltage protection;can survive input voltage stress of 440Vac for 48 hours·Multiple models for choice, see P.33 for more details·Protections: Short Circuit / Over Current / Over Voltage / Over Temp.·5 years warranty 

XLG series Constant Power Mode LED Driver

佛山市順德區冠宇達電源有限公司

Shown here is a 12W LED driver coming with a universal AC input, making it suitable to be used in most places of the world. The adapter also flaunts a built-in constant current limiting circuit, ensuring a consistent electricity flow throughout the charging time. This LED driver is perfect for various kinds of LED lighting such as street lighting and moving signs. 	 Universal AC input/full range. 	 Protections against short circuit/over load/over voltage/over temp. 	 Built-in active PFC function, PF&gt;0.96. 	 IP67/IP65 design for indoor or outdoor installations. 	 Cooling by free air convection. 	 Suitable for all kinds of LED lighting, street lighting and moving sign applications. 	 Built-in constant current limiting circuit (C.C.+C.V. mode). 	 Meet 4kV surge immunity level (IEC 6100-4-5). 	 3 years warranty. 	 Environmental specification/EMC. 	 Operation temp: -40-50℃ (refer to output derating curve). 	 Storage temp: -40-85℃. 	 Humidity: 10-90%RH. 	 MTBF calculation: up to 50,000 hours lifetime. 	 Safety approval: meet UL8750 (UL60950), EN61347, CCC.  

12W LED Driver

UFO LED Driver with Protections and MoreOur UFO high bay LED drivers havePFC, ficker free andisolated design that protect your lighting fixtures and make the lighting environments more pleasant and comfortable without harm. Moreover, they are suitable for UL dry and damp location withIP67 rating and 5 years warranty. All of our drivers haveopen/short/over-voltage/over-temperature protection. Moreover,2kV to 6kV surge protection that protection your high bay dimmable LED lights with long-last lifespan. And secure a safe and comfortable working/living environment for all walks of life. Also, most models can meetType HL,UL class 2&amp;class Ppower supply for LED lighting applications with higher safety concern. All of our LED drivers have below 20% THD and over 0.9 power factor that give high efficiency up to 90%. Theoperation temperature ranges from-40℃ to 50℃, and the maximum T-case temperature is 90℃. 

UFO High Bay LED Driver

泉州斯瑪斯電子科技有限公司

ModelSMT-DI020W070-DMXP-TCertificateUL/FCC/CE /ClassP/Class2/TYPE HL/SELV/ RoHS / Reach/ENEC/ICES/UKCAOutputOn-load voltage range12-54VOutput Current Setting(loset)70-700mARangeOutput Current Setting Range370-700mAwith Constant PowerRated power20W(Max)No Load Output Voltage60V(Max)Current Tolerance700mA±5%Total Output Current Ripple20mA(Imax)Startup Overshoot Current9%(Max)LineRegulation&lt;0.5%Load Regulation&lt;0.5%InputVoltage Range100-277VACFrequency Range47 - 63HzStandby Power≤0.5WPower Factor(Typ.)@ full load0.99@120VAC  0.97@230VAC  0.93@277VACTHD(Typ. ) @ full load&lt;10%@100-277VACEfficiency(Typ.)@ full load82%@120VAC  82%@230VAC  82%@277VACAC Current(Max.)&lt;0.3A@120VAC  &lt;0.22A@230VAC  &lt;0.15A@277VACStandby power≤0.5WInrush Current (Typ.)17.5A, 50%, 29.1us @120VAC;  33.6A, 50% 864us @277VAC  40.4A, 50% 26us @277VACLeakage current&lt;0.5mAProtectionShort CircuitConstant current mode, recovers automatically after fault condition is removedOver Load≥110% Constant current mode,recovers automatically after fault condition is removedOver temperatureAmbient temperature over 55℃±5℃ to reduce output to 50%;The ambient temperature drops to 45℃±5℃and automatically recovers.Ambient temperature over 75℃±5℃ to reduce output to 0%;The ambient temperature drops to 45℃±5℃and automatically recovers.EnvironmentWorking TEMP.-40~+50℃ (see below derating curve)Working Humidity20 - 90%RH non-condensingStorage TEM.,Humidity-40 - +80℃,10 - 95%RHnon-condensingTEMP.coefficient±0.03%/℃(0 - 50℃)Vibration10~500Hz, 2G 12min./1 cycle, period for 72min. each along X,Y,Z axes10~500Hz, 5G 12min./1 cycle, period for 72min. each along X,Y,Z axesSafety &amp; EMCSafety standardsUL8750;EN61347-1Withstand voltageI/P-O/P:1.88KVAC(MAX 3.75KVAC)Isolation resistanceI/P-O/P: 100MΩ/500VDC/25℃/70%RHEMC ImmunityIEC/EN61000-4-2,3,4,5,6,8,11; EN/EN61547EMC EmissionEN55015 EN61000-3-2,3、FCC Part15 Subpart B；ANSI C63.4:2014Surge Immunity TestAC Power Line:Differential Mode 2 kVOthersNet Weight215gDimension251.9*31*22.5mm(L*W*H)Packing290*225*215mm  50pcs /CTNNotes1. All parameters NOT specially mentioned are measured at 100VAC input, rated load and 25℃of ambient temperature.2. Default states:Output Current Settingis Maximum value.The dimming curve is a logarithmic curve.3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again4. To extend the driver's using life ,please reduce the loading at lower input voltage.5. Dimming electrical circuit:Notice: This control circuit is isolated,but didn't evaluate Class 2.Please refer to the installation manual to connect the dimmer.CAUTlON: More than one power supply present.ATTENTION: presence de plusieurs alimentations électriques.

UL CE ROHS Constant Current Led Transformer 20w 700mA DMX Dimmable Led Driver

E-Power Co., Ltd

E-POWER CO., LTD LED POWER SUPPLY / LED DRIVER MANUFACTURER IN KOREA IP20 - WATERPROOF CONSTANT VOLTAGE AND CONSTANT CURRENT HIGH EFFICIENCY, ULTRA SLIM TYPE, TARGET TO ZERO DEFECT,  CERTIFICATE: CE, CB, UL, BIS, KC, KS, TER   

LED DRIVER  35W~350W / IP20

Rayrun Technology Co., Ltd.

HDC50CB driveris a Casambi ready constant current LED driver. It’s also a fully software configurable driver based on the advanced features of Casambi platform. The output channel, rated current, fading speed and trim level features are all adjustable from the Casambi app. These features allow customer to apply in various application with rich options. It also implements the advanced full DC dimming scheme. These’s no PWM modulation and it’s 100% physically flicker free in whole dimming range.It also has very good low brightness performance, to build elegant low brightness environment and on/off dimming experience.  

HDC50CB Casambi 50W Programmable LED Driver

英飛特電子（杭州）股份有限公司

The NFM-1K2SxxxMT series is a 1200W, constant-current, programmable and IP66/IP67 rated LED driver that operates from 180-528Vac input with excellent power factor. Created for many lighting applications including high mast, sports, UV-LED and horticulture, etc. It provides an auxiliary voltage and dim-to-off functionality for powering low voltage, wireless controls. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, overpower protection, input under voltage, input over voltage, output over voltage, short circuit, and over temperature.  

NFM-1K2SxxxMG

Shenzhen MicroNature Innovation Technology Co Ltd

MicroNature Smart LED Driveris an AC/DC intelligent dimmable power supply that adopts latest generation PLC-IoT communication technology and is equipped with a SaaS cloud platform. It has advantages such asfast networking,wireless installation,long communication distance, andeasy maintenance. Through the collection, uploading, and analysis of big data, and the application of cloud technology, it enables remote management and operation of user devices. It comprehensively enhances energy utilization efficiency and the level of intelligence, greatly reducing manual maintenance costs.  1.   Industrial-grade quality:The body is made of full aluminum alloy, compact in size, with an IP66 protection rating, and isolated power supply. 2.   Dual-function design:Built-in power line carrier module, supports remote control, integrates single lamp controller and dimmable power supply functions. 3.   Safety protection:Supports active protection functions such as overcurrent and overload, supports active warning and fault reporting. 4.   Precise measurement:Accurately collects current, voltage, power, energy consumption, temperature, etc., with an error rate of less than 2‰. 5.   Suitable scenarios:Municipal Road lighting, tunnel lighting, industrial lighting.                         Model NO. P8-060E048 Output Power 60W Working Temperature -40℃~50℃ Storage Temperature -40℃~80℃ IP Rating IP67 Input Voltage 90-274 V Rated crossflow voltage 30-48 V Input Voltage Frequency 50/60 Hz Safety Certification Designed in compliance with IEC/EN 61347-1, EN 61347-2-13, and UL 1310 standard requirements. Operation Life 5 Years                        Shenzhen MicroNature Innovation Technology Co., Ltd.is a national high-tech enterprise specializing in PLC-IoT smart industrial lighting solutions. The company integrates design, research and development, manufacturing, and marketing. We haveleading High Speed Power Line Communication (HPLC) technology, anopen SAAS platform,well-established smart hardware systemandabundant experiencein industrial-grade smart lighting solutions such as Municipal Road lighting, tunnel lighting, and factory lighting...   If you are interested in our products, please feel free to contact us. We look forward to hearing from you.  Thank you for watching.         

MicroNature 60 Watts Smart LED Driver Constant Power Output Voltage Cover 30-48V Build-in PLC Module Remote Control, Dimmable

MicroNature Smart LED Driveris an AC/DC intelligent dimmable power supply that adopts latest generation PLC-IoT communication technology and is equipped with a SaaS cloud platform. It has advantages such asfast networking,wireless installation,long communication distance, andeasy maintenance. Through the collection, uploading, and analysis of big data, and the application of cloud technology, it enables remote management and operation of user devices. It comprehensively enhances energy utilization efficiency and the level of intelligence, greatly reducing manual maintenance costs.  1.   Industrial-grade quality:The body is made of full aluminum alloy, compact in size, with an IP66 protection rating, and isolated power supply. 2.   Dual-function design:Built-in power line carrier module, supports remote control, integrates single lamp controller and dimmable power supply functions. 3.   Safety protection:Supports active protection functions such as overcurrent and overload, supports active warning and fault reporting. 4.   Precise measurement:Accurately collects current, voltage, power, energy consumption, temperature, etc., with an error rate of less than 2‰. 5.   Suitable scenarios:Municipal Road lighting, tunnel lighting, industrial lighting.                         Model NO. P8-030E048 Output Power 30 W Working Temperature -40℃~50℃ Storage Temperature -40℃~80℃ IP Rating IP67 Input Voltage 90-274 V Rated crossflow voltage 30-48 V Input Voltage Frequency 50/60 Hz Safety Certification Designed in compliance with IEC/EN 61347-1, EN 61347-2-13, and UL 1310 standard requirements. Operation Life 5 Years        Shenzhen MicroNature Innovation Technology Co., Ltd.is a national high-tech enterprise specializing in PLC-IoT smart industrial lighting solutions. The company integrates design, research and development, manufacturing, and marketing. We haveleading High Speed Power Line Communication (HPLC) technology, anopen SAAS platform,well-established smart hardware systemandabundant experiencein industrial-grade smart lighting solutions such as Municipal Road lighting, tunnel lighting, and factory lighting...   If you are interested in our products, please feel free to contact us. We look forward to hearing from you.  Thank you for watching.         

 MicroNature 30 Watts Smart LED Driver Constant Power Output Voltage Cover 30-48V Build-in PLC Module Remote Control, Dimmable

Antron provides constant voltage LED driver series from 12W to 200W. The LED driver output voltage is typically 12V/24V/36V/48V. Most of our constant voltage LED drivers are with high power factor, flicker free, isolated design, IP65 waterproof rating and certified with UL/cUL recognized. Our constant voltage drivers are with “3-in-1 dimming” function, which is compatible with PWM, 0-10V and resistor dimming methodology. Universal input voltage 120-277VacConstant voltage options 12/24/36/48VPFC, Flicker Free, Isolated design3-in-1 Dimming (PWM, 0-10V, Resistance)Open/Short/Over-Voltage/Over Temp. protection2kV to 6kV surge protectionSuitable for UL dry and damp location5 years warranty 

Constant Voltage LED Driver

Antron self-diagnostic emergency LED driver is perfect for smart testing solution. As the name suggests, the EMB driver will automatically operate a30 seconds short-term test each month, and a90 minutes duration test every 12 months. Testing can also be done manually by pressing the test switch. Or simply toggle the emergency circuit breaker. Our self-diagnostic EMB series vary from10W,14Wand20W. It is compatible with any AC drivers that have maximum 5 amp output current. Universal input voltage 120-277VacAt least 90 minutes in emergency modeautomatically operate a 30 seconds short‐term test each monthautomatically operate a 90 minutes duration test every 12 monthsOpen/Short/Over-Voltage/Over Temp. protectionSuitable for UL dry and damp locationUL listed and CEC title 20 approval5 years warranty 

Self-Diagnostic Emergency LED Driver

Antron offers programmable LED driver series vary from25W to 149W. It allows you to adjust any output current/power that you prefer. The LED driver power supply can be programmed simply by aprogramming wandor any mobile smart device viaNFC signal. The output current/output wattage has50mA accuracywhen programming via NFC. The lowest dimming levels aredim-to-1%,dim-to-10%ordim-to-off. Universal input voltage 120-277, 347VacPFC, Flicker Free, Isolated designProgramming output current step with 50mA precision10-100% Dimming3-in-1 Dimming (PWM, 0-10V, Resistance)Open/Short/Over-Voltage/Over Temp. protection2kV to 6kV surge protectionSuitable for UL dry and damp location5 years warranty 

Programmable LED Driver

SDN Lighting Company

LED Linear light 17W Material: Aluminum housing+lens Dimension: 270*48.2*37.8mm Color：white/black/silver Votalge: DC48V Power：17W LED chip: Lumileds TX Driver: Tridonic 350-700mA 20-42V 3 levels CCT:2700K,4000K,5700K Warranty: 3 years 

LED linear light 

LED Linear light 10W 310mm Material: Aluminum housing+lens Dimension: 310*48.2*37.8mm Color：white/black/silver Votalge: DC48V Power：10W LED chip: Lumileds 2835 Driver: Tridonic 350-700mA 3-20V 3 levels CCT:2700K,4000K,5700K Warranty: 3 years  

我的採購