電子產品

elec

搜羅全球頂尖電子產品公司提供的電子產品資訊。您可在貿發網採購平台即時諮詢可靠和專業的產品供應商，以獲取詳盡的資料及報價。

電子產品供應商和製造商

Electronics

Shenzhen Everbest Machinery Industry Co., Ltd. (CEM)

 	 Safe CAT IV-1000V rating and toolbox tough with rubber reinforced case and buttons and low-profile detection tip Vibration and red LED alarms alert users to the presence of voltage in noisy areas Versatile High/Low sensitivity modes detect voltage on industrial equipment and low-voltage installations Powerful LED worklight always ready to illuminate poorly lit locations Inspection light at the probe tip facilitates testing in dark areas IP67 Waterproo  

Voltage Testers

Aerotek Innovations Ltd.

    DMI extender 60 m single cable (EKL-HE)     HDMI-CAT-HDMI Extender signal transmission of up to 50-60 meters     HDMI-CAT-HDMI Extender via CAT5 or CAT6 single line&nbsp;     (recommended) alternative to HDMI cable, and can extend the&nbsp;     HDMI signal transmission 50-60 meters.     HDMI Extender, use AWG26 cable specifications, signal&nbsp;     transmission of up to 50-60 meters     No loss of     Easy to install   
 Parameters:     Support HDMI1.3     HDCP 1.3 protocol compliant     Video input: 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i&nbsp;     Signal transmission: two cat6 cable (recommended) to replace the HDMI cable, the cable between the receiver and transmitter up to 55-60 meters     Support video output:&nbsp;     24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i CEC-     Supported audio format: DTS-HD/Dolby-     trueHD/LPCM7.1/DTS/Dolby-AC3/DSD     LED indicator lights: When the power supply or extenders work, the associated LED lights are lit     External DC5V power adapter&nbsp;   

HDMI Extender (By Cat-5E cable)

廣州市銥泰電子科技有限公司

 Presented is a phase detector which is manufactured for positive and negative phase detection. The phase detector is designed to perform phase sequence checks and live line checks of a 3-phase circuit using a static induction voltage clip. The main console features a LED display for showing test status.    Function: phase detection positive/negative.   Display: LED.   Weight (g): 270.   Continuously using 200 hours.   The static induction voltage clips are used to be able to clip on a clayed wire.   Meets IEC-10101 (EN61010), CAT Ⅲ (600V) safety requirement.   Red LED lamps are used to make the indication visible in dimly lit areas.   The direction of phase sequence can be checked easily using the LED lamps, which blink in order.   Technical functions: phase detection (normal phase, reverse phase and phase deficiency), live wire examination, simple power detection, breakpoint location and line maintenance.   Power supply: DC 3V AA Mn batteries (R6P) x 2pcs, continuously working for 200 hours.   Live voltage range: AC0~600V, 40~70Hz (Sine Wave Continuous Input)   Clamp wire size: diameter &oslash;18mm, insulated wire available (equivalent to wire cross-sectional area 120mm&sup2;).   LED display.   Positive phase: four lights of phase detection rotate in clockwise direction, with intermittent short beeps.   Reverse phase: four lights of phase detection rotate in counterclockwise direction, continuous beep.   Live power: R-S and S-T lights on within voltage setting range.   Phase deficiency: R-S, S-T lights do not flash.   Open circuit: R-S, S-T lights do not flash.   Boot indication: boot indication light turns on after booting.   Auto power off after 3 minutes, the meter automatically cut off power supply.   Clamp lead length: 0.5m.   Meter weight: 180g (with battery).   Working temperature and humidity: -10℃~55℃; below 80% RH.   Storage temperature and humidity: -20℃~60℃; below 90% RH.   Maximum measured voltage: AC 600V.   Dielectric strength: 5.4kVrms.   Maximum rated power: 100mVA.   Safety provisions: EN61010-1: 2001, EN61010-031: 2002, pollution level 2, CAT III (600V), transient over-voltage 6000V.   Meter: 1 piece.   Carrying case; 1 piece.  

我的採購