電子產品

elec

搜羅全球頂尖電子產品公司提供的電子產品資訊。您可在貿發網採購平台即時諮詢可靠和專業的產品供應商，以獲取詳盡的資料及報價。

電子產品供應商和製造商

Electronics

深圳市鴻偉高能科技有限公司

 This emergency module can transform your LED lights into reliable emergency lighting sources. This versatile device can work with tubes, panel lights and downlights. With great practicality, this module is great for most settings. 
 
  Voltage: AC 100-265V 50-60Hz.   
  Self consume power: 5W.   
  Battery charging: 24 hours.   
  Discharge current: 2A.   
  Suitable light source: LED tube, LED panel, LED downlight.   
  Battery specification: high temp NiCD/NiMH battery.   
  Environment temperature: -10+55&deg;C.   
  Highest surface temperature: 70&deg;C.   
  Battery protection device equipped. 
 

LED Tube Emergency Module

Shenzhen Keyingtong Electronic Technology Co., Ltd

100W Rainproof Power Supply

深圳邁睿智能科技有限公司

 	 The MC054V&nbsp; RC sensor is an innovative and active motion detectors with HF system 5.8 GHz. Motion can be detected through plastic, glass and thin non-metal materials. And the higher mounting height 15m Max. 	 The infrared remote controller design makes the customer to adjust the parameters of the sensors easily. 	 When used in combination with 0-10V dimmable LED drivers or ballasts, they can achieve 3-step dimming function,which is perfect for use in some areas that requires a light change notice before totally switch off.  

Microwave Motion Sensor

明緯香港控股有限公司

·DAL1-2 DT6(Dimming) or DT8 (Tunable white/RGBW) control available ·Constant voltage PWM style output with 1 or 4 channels ·Standby power consumption &lt;0.5W ·Function options:3 in 1dimming/DALl-2+PUSH Dimming ·Slim and Linear housing Design, terminal block wiring ·Built-in active PFC function·Class Ⅱpower unit，no F.G. ·Protections: Short circuit / Overload /Over voltage / Over Temp. ·Minimum dimming level 0.1%·Cooling by free air convection ·5 years warranty The series is expected to be launched by the end of December. 

Slim Constant-Voltage Dimmable/Tunable White & RGBW Control LED Driver

Matter over thread, Matter 1.3 specificationConstant power mode output with multiple stage selectable by DlP switch (H-type)Constant voltage mode output(12/24/48V)Plastic housing with class ll and PFC designFlicker free, complying with CE ErP directiveMeet emergency lighting (EL)applicationMinimum dimming level 0.1%(12/24/48V) / 0.5% (H-type)Built-in antenna design for easy installation5 years warrantyENEC/CCC/EAC/UKCA/CB/CE 

XLC-MA Series: 25W~60W Matter Wireless Dimmable LED Drivers 

· Constant power mode output (XLG-20~320)· Constant current mode（XLG-20 only）·Full power at 70~100% current·Universal AC input: 100~305VAC·Metal case with IP67·Built-in active PFC function·Class 2 power unit (XLG-20~100)·Surge protection with 6KV/4KV (10KV/6KV available)·India (EESL) version with input over voltage protection;can survive input voltage stress of 440Vac for 48 hours·Multiple models for choice, see P.33 for more details·Protections: Short Circuit / Over Current / Over Voltage / Over Temp.·5 years warranty 

XLG series Constant Power Mode LED Driver

Constant power mode output with multiple stage selectable by ETS databaseFlicker free, complying with CE ErP directiveKNX/ElB protocol, support KNX data secureMeet emergency lighting (EL) applicationMinimum dimming level 0.5%Built-in constant illuminance output function (ETS provides three presets L70/L80/L90 and customization)Built-in independent KNX push dimming interface5 years warrantyENEC/CCC/EAC/UKCA/CB/CE

XLC-KN Series: KNX Data Secure Constant Current LED Driver

Rayrun Technology Co., Ltd.

HDC50CB driveris a Casambi ready constant current LED driver. It’s also a fully software configurable driver based on the advanced features of Casambi platform. The output channel, rated current, fading speed and trim level features are all adjustable from the Casambi app. These features allow customer to apply in various application with rich options. It also implements the advanced full DC dimming scheme. These’s no PWM modulation and it’s 100% physically flicker free in whole dimming range.It also has very good low brightness performance, to build elegant low brightness environment and on/off dimming experience.  

HDC50CB Casambi 50W Programmable LED Driver

廣東新創電源科技有限公司

SCP seriesIsolated street light LED driversClass I type for insulationIsolation, constant current mode outputEfficiency up to 90.5%（Typ.）,measured at full load and 230Vac inputSurge protection: 6/10KV IP65Protection: SCP/OVP/OTPGlobal certifications: CB (Compliant with SASO2927 street lamp standard)Dimming function: 3 in 1 dimming(dim-to-off): 0-10V dimming/PWM dimming/resistance dimming, 12/0.25A AUX powerWorking temperature: -40 ~ +60℃ (Typ.: 25℃)Maximum case temperature: 90℃Storagetemperature: -40~85℃(Typ.: 25℃)Warranty: 5 years

SCP series-Isolated street light LED drivers

Antron Electronics Co., Ltd.

UFO LED Driver with Protections and MoreOur UFO high bay LED drivers havePFC, ficker free andisolated design that protect your lighting fixtures and make the lighting environments more pleasant and comfortable without harm. Moreover, they are suitable for UL dry and damp location withIP67 rating and 5 years warranty. All of our drivers haveopen/short/over-voltage/over-temperature protection. Moreover,2kV to 6kV surge protection that protection your high bay dimmable LED lights with long-last lifespan. And secure a safe and comfortable working/living environment for all walks of life. Also, most models can meetType HL,UL class 2&amp;class Ppower supply for LED lighting applications with higher safety concern. All of our LED drivers have below 20% THD and over 0.9 power factor that give high efficiency up to 90%. Theoperation temperature ranges from-40℃ to 50℃, and the maximum T-case temperature is 90℃. 

UFO High Bay LED Driver

香港錦億照明有限公司

TheSDE10 series emergency driver is a versatile emergency conversion kit designed to transform standard lighting fixtures into reliable emergency lighting systems. Its universal design allows it to be compatible with a wide range of lighting fixtures (excluding those with specific waterproof requirements), making it a flexible solution for various markets and applications. The product is certified withCB, CE, and ENEC, ensuring it meets stringent safety and performance standards across different regions.Key FeaturesUniversal Compatibility: Adaptable to nearly all types of lighting fixtures, enhancing its usability across diverse lighting systems. Maximum Output of 400VDC: Supports high-voltage requirements, making it suitable for a broad spectrum of LED and fluorescent fixtures. Built-In Battery: Simplifies installation and maintenance by eliminating the need for an external battery pack. Certifications: Holds CB, CE, and ENEC certifications, ensuring compliance with global safety and quality standards. Flexible Connection Options: Can be connected to either the driver input or directly to the lamp board, offering installation flexibility.ParametersOutput Voltage:Up to 400VDC, accommodating high-voltage lighting systems. Input Voltage:Typically 220–240V AC, 50/60Hz (universal input range may apply). Emergency Duration:Minimum of 3 hours, compliant with emergency lighting standards. Battery Type:Integrated, likely LiFePO4 for longevity and reliability. Certifications: CB, CE, ENEC. IP Rating:Standard indoor rating (e.g., IP20), not suitable for waterproof applications. MaintenanceBattery Longevity: The built-in battery requires minimal upkeep, with a typical lifespan of 5–10 years. Testing: Manual or automatic testing options may be available, depending on the model, to ensure readiness. Inspection: Periodic checks of wiring and battery status are recommended to maintain optimal performance.Compatible Lighting FixturesThe SDE10 series is compatible with a wide range of lighting fixtures, including: LED panels Downlights Troffers Linear fixtures Any fixture without waterproof requirements, as long as the voltage and current specifications align.Wiring AdvantagesFlexible Connections: Can be wired to the driver input or directly to the lamp board, simplifying retrofits. Pre-Wired Options: May include pre-attached cables or connectors for quick installation. Universal Input: Supports a broad input voltage range, reducing compatibility issues.Application RangeThe SDE10 series is ideal for: Commercial spaces (offices, retail) Public buildings (schools, hospitals) Industrial settings (warehouses, factories) Any indoor environment requiring compliant emergency lighting.  

Emergency Conversion Kits

E-Power Co., Ltd

E-POWER CO., LTD LED POWER SUPPLY / LED DRIVER MANUFACTURER IN KOREA IP20 - WATERPROOF CONSTANT VOLTAGE AND CONSTANT CURRENT HIGH EFFICIENCY, ULTRA SLIM TYPE, TARGET TO ZERO DEFECT,  CERTIFICATE: CE, CB, UL, BIS, KC, KS, TER   

LED DRIVER  35W~350W / IP20

佛山市順德區冠宇達電源有限公司

Shown here is a 12W LED driver coming with a universal AC input, making it suitable to be used in most places of the world. The adapter also flaunts a built-in constant current limiting circuit, ensuring a consistent electricity flow throughout the charging time. This LED driver is perfect for various kinds of LED lighting such as street lighting and moving signs. 	 Universal AC input/full range. 	 Protections against short circuit/over load/over voltage/over temp. 	 Built-in active PFC function, PF&gt;0.96. 	 IP67/IP65 design for indoor or outdoor installations. 	 Cooling by free air convection. 	 Suitable for all kinds of LED lighting, street lighting and moving sign applications. 	 Built-in constant current limiting circuit (C.C.+C.V. mode). 	 Meet 4kV surge immunity level (IEC 6100-4-5). 	 3 years warranty. 	 Environmental specification/EMC. 	 Operation temp: -40-50℃ (refer to output derating curve). 	 Storage temp: -40-85℃. 	 Humidity: 10-90%RH. 	 MTBF calculation: up to 50,000 hours lifetime. 	 Safety approval: meet UL8750 (UL60950), EN61347, CCC.  

12W LED Driver

英飛特電子（杭州）股份有限公司

The NFM-1K2SxxxMT series is a 1200W, constant-current, programmable and IP66/IP67 rated LED driver that operates from 180-528Vac input with excellent power factor. Created for many lighting applications including high mast, sports, UV-LED and horticulture, etc. It provides an auxiliary voltage and dim-to-off functionality for powering low voltage, wireless controls. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, overpower protection, input under voltage, input over voltage, output over voltage, short circuit, and over temperature.  

NFM-1K2SxxxMG

泉州斯瑪斯電子科技有限公司

ModelSMT-DI020W070-DMXP-TCertificateUL/FCC/CE /ClassP/Class2/TYPE HL/SELV/ RoHS / Reach/ENEC/ICES/UKCAOutputOn-load voltage range12-54VOutput Current Setting(loset)70-700mARangeOutput Current Setting Range370-700mAwith Constant PowerRated power20W(Max)No Load Output Voltage60V(Max)Current Tolerance700mA±5%Total Output Current Ripple20mA(Imax)Startup Overshoot Current9%(Max)LineRegulation&lt;0.5%Load Regulation&lt;0.5%InputVoltage Range100-277VACFrequency Range47 - 63HzStandby Power≤0.5WPower Factor(Typ.)@ full load0.99@120VAC  0.97@230VAC  0.93@277VACTHD(Typ. ) @ full load&lt;10%@100-277VACEfficiency(Typ.)@ full load82%@120VAC  82%@230VAC  82%@277VACAC Current(Max.)&lt;0.3A@120VAC  &lt;0.22A@230VAC  &lt;0.15A@277VACStandby power≤0.5WInrush Current (Typ.)17.5A, 50%, 29.1us @120VAC;  33.6A, 50% 864us @277VAC  40.4A, 50% 26us @277VACLeakage current&lt;0.5mAProtectionShort CircuitConstant current mode, recovers automatically after fault condition is removedOver Load≥110% Constant current mode,recovers automatically after fault condition is removedOver temperatureAmbient temperature over 55℃±5℃ to reduce output to 50%;The ambient temperature drops to 45℃±5℃and automatically recovers.Ambient temperature over 75℃±5℃ to reduce output to 0%;The ambient temperature drops to 45℃±5℃and automatically recovers.EnvironmentWorking TEMP.-40~+50℃ (see below derating curve)Working Humidity20 - 90%RH non-condensingStorage TEM.,Humidity-40 - +80℃,10 - 95%RHnon-condensingTEMP.coefficient±0.03%/℃(0 - 50℃)Vibration10~500Hz, 2G 12min./1 cycle, period for 72min. each along X,Y,Z axes10~500Hz, 5G 12min./1 cycle, period for 72min. each along X,Y,Z axesSafety &amp; EMCSafety standardsUL8750;EN61347-1Withstand voltageI/P-O/P:1.88KVAC(MAX 3.75KVAC)Isolation resistanceI/P-O/P: 100MΩ/500VDC/25℃/70%RHEMC ImmunityIEC/EN61000-4-2,3,4,5,6,8,11; EN/EN61547EMC EmissionEN55015 EN61000-3-2,3、FCC Part15 Subpart B；ANSI C63.4:2014Surge Immunity TestAC Power Line:Differential Mode 2 kVOthersNet Weight215gDimension251.9*31*22.5mm(L*W*H)Packing290*225*215mm  50pcs /CTNNotes1. All parameters NOT specially mentioned are measured at 100VAC input, rated load and 25℃of ambient temperature.2. Default states:Output Current Settingis Maximum value.The dimming curve is a logarithmic curve.3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again4. To extend the driver's using life ,please reduce the loading at lower input voltage.5. Dimming electrical circuit:Notice: This control circuit is isolated,but didn't evaluate Class 2.Please refer to the installation manual to connect the dimmer.CAUTlON: More than one power supply present.ATTENTION: presence de plusieurs alimentations électriques.

UL CE ROHS Constant Current Led Transformer 20w 700mA DMX Dimmable Led Driver

Shenzhen MicroNature Innovation Technology Co Ltd

MicroNature Smart LED Driveris an AC/DC intelligent dimmable power supply that adopts latest generation PLC-IoT communication technology and is equipped with a SaaS cloud platform. It has advantages such asfast networking,wireless installation,long communication distance, andeasy maintenance. Through the collection, uploading, and analysis of big data, and the application of cloud technology, it enables remote management and operation of user devices. It comprehensively enhances energy utilization efficiency and the level of intelligence, greatly reducing manual maintenance costs.  1.   Industrial-grade quality:The body is made of full aluminum alloy, compact in size, with an IP66 protection rating, and isolated power supply. 2.   Dual-function design:Built-in power line carrier module, supports remote control, integrates single lamp controller and dimmable power supply functions. 3.   Safety protection:Supports active protection functions such as overcurrent and overload, supports active warning and fault reporting. 4.   Precise measurement:Accurately collects current, voltage, power, energy consumption, temperature, etc., with an error rate of less than 2‰. 5.   Suitable scenarios:Municipal Road lighting, tunnel lighting, industrial lighting.                         Model NO. P8-060E048 Output Power 60W Working Temperature -40℃~50℃ Storage Temperature -40℃~80℃ IP Rating IP67 Input Voltage 90-274 V Rated crossflow voltage 30-48 V Input Voltage Frequency 50/60 Hz Safety Certification Designed in compliance with IEC/EN 61347-1, EN 61347-2-13, and UL 1310 standard requirements. Operation Life 5 Years                        Shenzhen MicroNature Innovation Technology Co., Ltd.is a national high-tech enterprise specializing in PLC-IoT smart industrial lighting solutions. The company integrates design, research and development, manufacturing, and marketing. We haveleading High Speed Power Line Communication (HPLC) technology, anopen SAAS platform,well-established smart hardware systemandabundant experiencein industrial-grade smart lighting solutions such as Municipal Road lighting, tunnel lighting, and factory lighting...   If you are interested in our products, please feel free to contact us. We look forward to hearing from you.  Thank you for watching.         

MicroNature 60 Watts Smart LED Driver Constant Power Output Voltage Cover 30-48V Build-in PLC Module Remote Control, Dimmable

MicroNature Smart LED Driveris an AC/DC intelligent dimmable power supply that adopts latest generation PLC-IoT communication technology and is equipped with a SaaS cloud platform. It has advantages such asfast networking,wireless installation,long communication distance, andeasy maintenance. Through the collection, uploading, and analysis of big data, and the application of cloud technology, it enables remote management and operation of user devices. It comprehensively enhances energy utilization efficiency and the level of intelligence, greatly reducing manual maintenance costs.  1.   Industrial-grade quality:The body is made of full aluminum alloy, compact in size, with an IP66 protection rating, and isolated power supply. 2.   Dual-function design:Built-in power line carrier module, supports remote control, integrates single lamp controller and dimmable power supply functions. 3.   Safety protection:Supports active protection functions such as overcurrent and overload, supports active warning and fault reporting. 4.   Precise measurement:Accurately collects current, voltage, power, energy consumption, temperature, etc., with an error rate of less than 2‰. 5.   Suitable scenarios:Municipal Road lighting, tunnel lighting, industrial lighting.                         Model NO. P8-030E048 Output Power 30 W Working Temperature -40℃~50℃ Storage Temperature -40℃~80℃ IP Rating IP67 Input Voltage 90-274 V Rated crossflow voltage 30-48 V Input Voltage Frequency 50/60 Hz Safety Certification Designed in compliance with IEC/EN 61347-1, EN 61347-2-13, and UL 1310 standard requirements. Operation Life 5 Years        Shenzhen MicroNature Innovation Technology Co., Ltd.is a national high-tech enterprise specializing in PLC-IoT smart industrial lighting solutions. The company integrates design, research and development, manufacturing, and marketing. We haveleading High Speed Power Line Communication (HPLC) technology, anopen SAAS platform,well-established smart hardware systemandabundant experiencein industrial-grade smart lighting solutions such as Municipal Road lighting, tunnel lighting, and factory lighting...   If you are interested in our products, please feel free to contact us. We look forward to hearing from you.  Thank you for watching.         

 MicroNature 30 Watts Smart LED Driver Constant Power Output Voltage Cover 30-48V Build-in PLC Module Remote Control, Dimmable

DALI Alliance

The global certified APD Series is a dual stage high efficiency smart LED driver. 10kV surge protection level, 100khour long life and 7-year warranty provide high confidence to luminaire users. It supports not only traditional 0-10V control, but also D4i smart protocols with NFC programmability. All around protections including digital OTP (internal and external by NTC) with auto-recovery secure 24hour non-stop operation for luminaires. 

uPowerTek APD Series D4i Smart LED Driver

Non-isolated Flicker Free UFO LED Driver Input voltage:100-277VOutput voltage:100-180V/180-260VTHD＜10%/PF＞0.95 Surge protection: L-N :6KV; L/N- E:10KVEfficiency:≧93%at 230Vac input, full loadIP grade: IP65Protections:UVP/SCP/OVP/OTPGlobal certifications: ENEC-CE/SAA/CCC/CUL/UL（C version is compliant with new ERP directive）Dimming function: 3 in 1 dimming(0-10V dimming/PWM dimming/resistance dimming), AUX power: 12V/0.25AWorking temperature: -40 ~ 65℃(Typ.: 25℃)Maximum case temperature: 90℃Storage temperature: -40 ~ 85℃(Typ.: 25℃)Warranty: 5 years

LVS series:Non-isolated Flicker Free UFO LED Drivers

Smar LED Lighting Guangzhou Co., Ltd

DOWNLIGHT, TRACKLIGHT, SPOTLIGHT COB 1)Meet EMC standard. 2)Dimmable IC. 3)Surge protection 2KV. 4)OTP, OVP, OCP.     Directly connect to the city power supply, without the need for an external driver. High-voltage linear IC. Dimmable. Power factor greater than 0.9. Has over-temperature protection, over-voltage protection, and over-current protection functions. E-mail: dale@smarledlighting.com www.smar-ledlighting.com 

Driver on board COB, driverless COB, Dimmable COB, COB Module, LED COB

廣東省科泰照明有限公司

—Simple design enjoys great popularity                 —DALI control system is optional               —Full range of sizes can meet different customers' requirements 

3 PHASE LED DIMMABLE TRACK LIGHT WITH DRIVER BUILD IN

REPLACE THE HALOGEN LIGHT SOURCE 1)Driver on board design. 2)Sapphire technology, 360° illumination. Model No.PowerDimensionInput VoltageEfficacyRaPFColor TemperatureR7S78-5W5Wφ16*78mm180V-270V100Lm/W&gt;80&gt;0.93000K/4000K/6000KR7S118-10W10Wφ14*118mm180V-270V100Lm/W&gt;80&gt;0.93000K/4000K/6000K 

10W Light Source, LED COB,  Driverless COB, Driver on board COB, COB Module

Input voltage: 200-277 THD&lt;10%, PF&gt;0.95 Class I type for insulationConstant current output ,with power limitation for control modeEfficiency: 90%（Typ.）Surge protection: 6/10KV Metal material case,IP67Protection: UVP/SCP/OVP/OTPGlobal certifications: CCC/CE/CBDimming function: 3-in-1 dimming (1-10V dimming, resistance dimming, PWM dimming) Output current is dimmed by external potentiometer (Only Type A)Output current is dimmed by Isolated 3 in 1 dimmer（Only Type B）Working temperature: -40 ~ 55℃ Safety case temperature: -40 ~ 90℃Storage temperature:-40 ~ 80℃Warranty: 5 years

HVE series:Isolated Street Light LED Drivers

Model: RK-DALINFC1-V1 Supported Protocols: IEC62386-101, IEC62386-102, IEC62386-207,IEC62386-250,IEC62386-251, IEC62386-252, IEC62386-253. Supported Functions: DALI-2 DT6 dimming, DT8 color temperature adjustment, D4i, PushDim; it adopts the ISO15693 international standard and features NFC settings, current reading, and various configurable parameters of DALI-2. Power Supply: DC 5V, higher than 20mA. DALI Interface: 9.5V-22.5V, 1.9mA, Protected against accidental connection to 220V. Output PWM: 1 channel PWM, dimming range from 0.1% to 100% (frequency and minimum brightness can be customized, minimum dimming depth is 0.1%). Working Temperature: -40~85 °C. Board Size: 51X17.5X6mm. Installation Method: Gold finger/Pin header. DALI Certification: Compliant with DALI-2 and D4i certification standards, and we can assist customers in completing DALI-2 and D4i certifications. 

我的採購