電視遊戲設備

Foshan Shunde Advante Electron Ltd.

·▶【KINDLY NOTE】- This wireless switch needs to work withAdventremote receiver to control lights on/off. ·▶【Easy to Install】- Simply install the receiver between the devices to be controlled and the power supply. You can switch your lights on and off from anywhere via the remote control panel. Expand your lighting system freely but not affect the existing system. ·▶【Safety and Strong Signal】- IP44waterproof, thus use safely even in damp places. Strong signal through the walls and remote control your bulbs, halogen lamps, fluorescent lamps, CFLs, LED lights, fans and other electrical switchboards, etc. Before install, we advise testing the work distance. · ▶【Create Multi-location Switching Applications】- One receiver can hold up to 4 control switches. You can control your lights in the house from multi-location. Such as multi-way switch for staircase, basement, garage, outdoor, attic, hallway, loft, kitchen lighting, etc. 

Wireless Lighting Control

深圳市金流明光電技術有限公司

The LEDGEAR® Digital Universal Dimmer F92001-40028301 can be used with many common, dimmable, line voltage LED lamps, high voltage halogen and incandescent lamps, electronic transformers and Kinglumi Trailing tunable white(TTW®) LED lamps. The dimmer equipped with microcontroller and suitable for use in special applications where you need to dim off. Suitable for use in both commercial and residential lighting control in flush mounted(both screw and claws) that can control a maximum load of 400 W at 230 V. With safety to EN60669, EN55015 and providing protection from over temperature, short-circuit and overload, this is a high quality product that will give you reliable protection and service. Its standby power consumption is 0.5 W and EU EcoDesign compliant. The 4in1 universal dimming allowing to works with Resistive, Capacitive, Inductive and Kinglumi TTW® lamps. It helps to reduce the inventory.  •  Device works according to the leading edge, trailing edge phase control principle; also Kinglumi Trailing TW principle •   Manual setting of the dimming principle suitable for the load •   Allows extension push-button on dimming / switching •   Dim to OFF with most LED light sources •   Switch-on with last brightness or saved switch-on brightness •   Switch-on brightness can be saved permanently •   Suitable for both retrofit and new installations •   Soft start* for customization(factory preset) only •   Permissible AC cable 0.75-2.5mm² wire gauge •   Built--in with permanent memory •   85°C Maximum case operation temperature(tc-point ¹) •   Operating temperature ¹: -20°C ~ +45°C, the humidity: 20% ~ 85% •   Five-year factory guarantee and lifetime technical support •   Switching •   Dimming •   Colour temperature tuning* (only works with Kinglumi TTW® lamps) •   Memory •   Leading &amp; trailing selectable The device provides the following protective functions: •   Inrush current limitation through soft start •   Electronic overload, over temperature protection •   Electronic short-circuit protection •   Integrated thermal fuse •  Electronic over voltage  More details, please refer to: http://www.kinglumi.com/product-1863.html Unboxing of dimmer: https://youtu.be/zUDx61SCw5c SUBSCRIBE to Kinglumi: https://www.youtube.com/channel/UCPY3y9WvRkeWiJOXYUgv2Pw  

Digital Universal 4in1(RCL) Rotary Dimmer with Tunable White

FREE LIGHTING LIMITED

Spec:
Dimming Mode:Trailing edge
Input voltage: 200-240V
Input Frequency:50Hz
Minimum Load:2W
LED Load: 175W
Incandescent Load:350W
Halogen Load:350W
Over load protect
Short Circuit protect
Colorful LED Indicator

Feature:
1.Minimum load 2W, compatible incandescent bulb and dimmable LED lamps.
2.No Neutral required, easy for installation.
3.Compatible with most of well-know brand wall plate.
4.Colorful LED indicator design will guide user to find out problems easily.
5.Built in Short-circuit, overload and over temperature protection, make sure the connection safe when wrong wiring or failure load
6.Resettable electronic circuit protection design replace the traditional fuse design, resettable protection make the dimmer will survive in wrong wiring or failure load. when problem is fixed and reset, the dimmer will keep working as normal

LED and Halogen Dimmer 2-350 Watt

wenzhou weituo precision mould co.,ltd

Wireless Smart Street Light Controller Base Saving Energy smart lighting Nema 5pin 7 pin controller base plug

Zhuhai Ltech Electronic Technology Co., Ltd

 	 RGBW LED Touch Panel (Work with commercial wifi lighting control system) 	 EX8S RGBW Touch Panel (4 zones) 	 Input Voltage:: 100-240Vac 	 Output Signal: RF 2.4GHz, DMX512 	 Control mode: Synchronous control 	 Working Temp.: -30--55 degree centigrade 	 Dimensions: L86&times;W86&times;H36(mm) 	 Package Size: L113&times;W112&times;H50(mm) 	 Weight(G.W.): 225g  

RGBW LED Touch Panel

Shenzhen Futlight Optoelectronics Co.,Ltd

LED Strip Controller

江門市立大照明有限公司

Feature of this LED controller：

This multi-functions controller which has digital indicating is specially designed to be used exclusively with LED lighting; its output has four wires three channels (common-anode)： 	 Touching Panel, easy for operating and safe. 	 Aluminum alloy housing is good for heat spreading directly. 	 DMX digital addresses setting and power off protecting 	 Working style: (master and slaver connecting mode, DMX mode, Independent mode） 	 Gray glass 10 scale adjustable. 	 Built in 10 set program 	 Compatible with DMX512 signal, such as DMX 512 control. 	 DMX dimmable and independent dimmable by pressing key  Specification: 	 Input Voltage:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; AC110V-240V 50HZ/60HZ 	 Output Voltage:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; DC110-240V 	 Output power rate:&nbsp;&nbsp; 1000W/120V&nbsp; 2000W/230V 	 Output current:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &le;3A&nbsp;&nbsp;&nbsp; 	 Output Connector:&nbsp;&nbsp; 4&nbsp; channels.&nbsp;&nbsp; 4-pin cables 	 Communication port:DMX512 communicate port (1:earth, 2:Data-, 3:Data+) 	 Working temperature:&nbsp;&nbsp; 0&deg;C~+35&deg;C (0&deg;F ~ +104&deg;F) 	 Net Weight:&nbsp;&nbsp; 0.7Kg 	 Dimension:&nbsp; L160 mm * W147 mm * H42 mm 	 Housing material:&nbsp; Silvery aluminum alloy 	 Metal Casting Process: Die Casting (Low Pressure)  

110-240V DMX Decoder and Controller

Entity Elettronica s.r.l.

 	 Wi-Fi interface for Google Assistant /&nbsp;Amazon Alexa. 	 The Wi-Fi controller, through simple commands given to the vocal assistant, allows&nbsp;to control LED lamps through simple voice commands (on/off, light intensity, RGB,&nbsp;RGBW, tunable white, scenario, etc.).  For more information:&nbsp; 	 https://www.entityel.com/index.php/en/component/zoo/led/controllers-for-lights/wireless-solutions/en1612-2  

EN1650 DOMOVOICE

A-Z Star Electrical (Hong Kong) Limited

 	 Works with Alexa for voice control 	 Using app to remote control your lights and appliances from anywhere or at any time 	 Dimmable or non-dimmable working modes can be selectable 	 Easily set schedules and timers for your lights which can create different lighting scenes and adjust brightness 	 Automatically turns lights on and off randomly when you are away or traveling 	 Full-range dimming (no dead route) 	 Low-level startup (1%-2% range)  

Smart Plug-in Dimmer

	Full-range dimming (no dead route)	Low-level startup ( 1%-2% range)

UK Dimmer

 	 Works with Alexa for voice control 	 Using App to remote control your lights and appliances from anywhere or at any time 	 Dimmable or Non-dimmable working modes can be selectable. 	 Easily set schedules and timers for your lights which can create different lighting scenes and adjust brightness. 	 Automatically turns lights on and off randomly when you are away or traveling 	 Full-range dimming ( no dead route) 	 Low-level start up ( 1%-2% range )  

Full-range dimming ( no dead route)Low-level start up ( 1%-2% range )Max load: Incan.：600W / LED：200W

American Dimmer

Spec:
Dimming Mode:Trailing edge
Input voltage: 200-240V
Input Frequency:50Hz
Minimum Load:2W
LED Load: 100W
Incandescent Load:150W
Halogen Load:150W
Over load protect
Short Circuit protect
Colorful LED Indicator

Feature:
1.Minimum load 2W, compatible incandescent bulb and dimmable LED lamps.
2.No Neutral required, easy for installation.
3.Compatible with most of well-know brand wall plate.
4.Colorful LED indicator design will guide user to find out problems easily.
5.Built in Short-circuit, overload and over temperature protection, make sure the connection safe when wrong wiring or failure load
6.Resettable electronic circuit protection design replace the traditional fuse design, resettable protection make the dimmer will survive in wrong wiring or failure load. when problem is fixed and reset, the dimmer will keep working as normal

LED and Halogen Cord Dimmer 2-150 Watt

Spec:
Dimming Mode:Trailing edge
Input voltage: 200-240V
Input Frequency:50Hz
Minimum Load:2W
LED Load: 100W
Incandescent Load:200W
Halogen Load:200W
Over load protect
Short Circuit protect
Colorful LED Indicator

Feature:
1.Minimum load 2W, compatible incandescent bulb and dimmable LED lamps.
2.No Neutral required, easy for installation.
3.Compatible with most of well-know brand wall plate.
4.Colorful LED indicator design will guide user to find out problems easily.
5.Built in Short-circuit, overload and over temperature protection, make sure the connection safe when wrong wiring or failure load
6.Resettable electronic circuit protection design replace the traditional fuse design, resettable protection make the dimmer will survive in wrong wiring or failure load. when problem is fixed and reset, the dimmer will keep working as normal

LED and Halogen Bell Press Dimmer 2-200 Watt

Spec:
Dimming Mode:Trailing edge
Input voltage: 200-240V
Input Frequency:50Hz
Minimum Load:2W
LED Load: 2*110W
Incandescent Load:2*150W
Halogen Load:2*150W
Over load protect
Short Circuit protect
Colorful LED Indicator

Feature:
1.Minimum load 2W, compatible incandescent bulb and dimmable LED lamps.
2.No Neutral required, easy for installation.
3.Compatible with most of well-know brand wall plate.
4.Colorful LED indicator design will guide user to find out problems easily.
5.Built in Short-circuit, overload and over temperature protection, make sure the connection safe when wrong wiring or failure load.
6.Resettable electronic circuit protection design replace the traditional fuse design, resettable protection make the dimmer will survive in wrong wiring or failure load. when problem is fixed and reset, the dimmer will keep working as normal.

LED and Halogen Dimmer switch 2*150 Watt

Spec:
Dimming Mode:Trailing edge
Input voltage: 200-240V
Input Frequency:50Hz
Minimum Load:2W
LED Load: 100W
Incandescent Load:200W
Halogen Load:200W
Over load protect
Short Circuit protect

Feature:
1.Minimum load 2W, compatible incandescent bulb and dimmable LED lamps.
2.No Neutral required, easy for installation.
3.Compatible with most of well-know brand wall plate.
4.Built in Short-circuit, overload and over temperature protection, make sure the connection safe when wrong wiring or failure load
5.Resettable electronic circuit protection design replace the traditional fuse design, resettable protection make the dimmer will survive in wrong wiring or failure load. when problem is fixed and reset, the dimmer will keep working as normal

LED and Halogen Dimmer 2-200 Watt

Spec:
Dimming Mode:Trailing edge
Input voltage: 200-240V
Input Frequency:50Hz
Minimum Load:2W
LED Load: 75W
Incandescent Load:150W
Halogen Load:150W
Over load protect
Short Circuit protect
Colorful LED Indicator

Feature:
1.Minimum load 2W, compatible incandescent bulb and dimmable LED lamps.
2.No Neutral required, easy for installation.
3.Compatible with most of well-know brand wall plate.
4.Colorful LED indicator design will guide user to find out problems easily.
5.Built in Short-circuit, overload and over temperature protection, make sure the connection safe when wrong wiring or failure load
6.Resettable electronic circuit protection design replace the traditional fuse design, resettable protection make the dimmer will survive in wrong wiring or failure load. when problem is fixed and reset, the dimmer will keep working as normal

Spec:
Dimming Mode:Trailing edge
Input voltage: 200-240V
Input Frequency:50Hz
Minimum Load:2W
LED Load: 75W
Incandescent Load:150W
Halogen Load:150W
Over load protect
Short Circuit protect
LED Indicator

Feature:
1.Minimum load 2W, compatible incandescent bulb and dimmable LED lamps.
2.No Neutral required, easy for installation.
3.Compatible with most of well-know brand wall plate.
4.Colorful LED indicator design will guide user to find out problems easily.
5.Built in Short-circuit, overload and over temperature protection, make sure the connection safe when wrong wiring or failure load
6.Resettable electronic circuit protection design replace the traditional fuse design, resettable protection make the dimmer will survive in wrong wiring or failure load. when problem is fixed and reset, the dimmer will keep working as normal

LED and Halogen Plug-in Dimmer Switch 2-150 Watt

SHANGHAI LIPU LIGHTING CO., LTD.

Photocell

Pencil Swivel Control

 	 Entity designed several solutions with integrated Bluetooth CASAMBI and XICATO modules to realize cost-effective systems: 	 EN1612 BLUETOOTH (CASAMBI &amp; XICATO) &ndash; DALI BRIDGE (Vin=24-48Vdc, 4 channels): through a DALI compatible protocol it is possible to control up to 4 independent channels (4 lamps or 4 groups of lamps) 	 EN1652 XICATO BRIDGE (Vin=Vout 12-48Vdc, 1 channel) / EN1651 XICATO BRIDGE (Vin=Vout 12-48Vdc, 4 channels): depending on the version, it is possible to control 1 PWM voltage channel (EN1652) or 4 independent PWM voltage channels (EN1651). 	 For more information:&nbsp;https://www.entityel.com/index.php/en/products-2/led-2/led/controllers-for-lights/sistemi-bluetooth  

我的採購

確定要取消關注此供應商？

確定要取消關注此供應商？