廣州市奧迪詩音響科技有限公司

The speaker woofer in this picture features a set of quality voice coils to make crystal-clear sound. The cone is rubberized to improve durability. This speaker woofer is a great enhancement to be applied in speaker boxes.
 
  With an injection V-cone. 
  Big round type rubber edges. 
  Dual 4-Ohm heavy-duty voice coils. 
  Dual large-amplitude and high-power magnets. 
 

Speaker Woofer

This Class D power amplifier is professionally manufactured for guaranteed performance. It features variable low-pass and high-pass crossover filters, a tri-mode output configuration, a high-efficiency power supply, 2-ohm stable circuits, and anti-radio-interference capabilities. The built-in protection against short circuits, overloading and over-voltage&nbsp;ensures ultimate user safety.&nbsp;

 
  Polished finish. 
  Compact and lightweight design. 
 

Class D Power Amplifier

朗怡國際有限公司

►&nbsp;FM radio PLL with preset stations
► 1.8&rsquo;&rsquo; White LED display with dimmer
►&nbsp;12-hr or 24-hr clock
►&nbsp;Dual alarm, wake by radio or buzzer
►&nbsp;Snooze, sleep and NAP function
►&nbsp;1A USB port for charging smartphone and/or tablet
►&nbsp; Aux-in jack
►&nbsp;Wooden case
►&nbsp; 2 x 2 Inch speaker, output power 2 x 1W (10% THD)
►&nbsp; AC operated

Speaker

► Stream music from another compatible Bluetooth device such as smart phone, computer or tablet ...
► FM PLL radio with preset stations
► 1.2 Inch white LED display
► 12Hrs or 24Hrs clock
► Dual alarm, wake to buzzer or Bluetooth or radio
► Snooze and sleep function
► 1 speaker, 2W output power (10% THD)
► 1A USB charging
► Aux-in jack
► AC operated (built-in transformer 100-240V, 50/60Hz)

This car amplifier features a uniquely designed housing, making it a smart car decoration as well. The amplifier comes with a variable low-pass and high-pass crossover, offering the best sound quality. Impress your car passengers with music through&nbsp;this high-performance amplifier. 

 
  Power efficiency: RMS 4ohm. 
  Power: 120W x 4. 
  Tri-mode output configurations. 
  2ohm stable circuits 
  Treble and bass boost. 
  Thermal, short-circuit, overloading and over-voltage protection. 
 

Car Amplifier

This car audio equalizer showcases a robustly constructed housing, promising a long lifespan. The front panel features easy-to-operate rotary knobs. The equalizer allows adjustment at five bands. With audio and video input support, the car equalizer makes a convenient entertainment tool. 

 
  Five equalization bands (at 55Hz, 250Hz, 500Hz, 2KHz and 10KHz). 
  Adjustable from -18dB to +18dB. 
  Supports USB, SD, MMC and&nbsp;MS input. 
  Supports MP4, JPEG, DIVX, AVI, WMA, AAC and&nbsp;MP3 decoding. 
  Supports CVBS video output. 
 

Car Audio Equalizer

This is a 4-channel power amplifier utilizing the high-efficiency MOSFET power supply. It is meticulously designed for excellent performance. This outlined power amplifier is designed for car use.
 
  Variable low pass and high pass crossover. 
  Tri-mode output configurations. 
  2Ohm stable circuits. 
  Thermal, short-circuit and overloading protection. 
 

4-Channel MOSFET Power Amplifier

This is a car amplifier with a 3,000-watt power design. It comes with an extra-heavy heat sink for better heat dissipation. This highlighted car amplifier is compatible with different car brands.
 
  1-channel class D power amplifier class D technology remote subwoofer level control. 
  Military spec audiophile grade components. 
  Variable low pass and high pass crossover 1 ohm stable circuits. 
  Thermal, short-circuit, overloading and over-voltage protection. 
 

This 4-band equalizer is specifically designed in a standard size for cars. It is professionally engineered with a built-in subwoofer to produce powerful sound effects. It allows you to listen to music with depth and clarity.
 
  With level and frequency controls. 
  One-half DIN-size chassis. 
  DC-DC switching power supply. 
 

4-Band Equalizer

   The is a car amplifier which is electronical   The color of the car amplifier is black, with silver ventilated accessories   This car amplifier is rectangular in shape  

   This is a electronical car equalizer with 4 band parametric characteristics   This electronical car equalizer comes with subwoofer output   Its rated power of right and left of this car amplifier are both 90w   Its frequency response of this car amplifier is 20-20 kHZs   475x400x215 mm  

Car Equalizer

This high-performance car equalizer features seven equalization bands that are adjustable from -12 decibels&nbsp;to 12 decibels. It is professionally manufactured for guaranteed quality. Equip your car with this sophisticated equalizer.&nbsp;

 
  7&nbsp;equalization bands at 63Hz, 250Hz, 500Hz, 1KHz, 2.5KHz, 6.3KHz, and 10KHz. 
  User-friendly design. 
 

 	 1.Material: aluminium 	 2.Style: mini amplifier 	 3.Power: 300Wx1ch, 80Wx4ch, 60Wx4ch+200Wx1ch 	 4.Type: class D 	 5.MOQ: 300pcs  

Mini Car Amplifier 

瑞揚電子有限公司

 	 MINI Tabletop Stereo Amplifier with WIFI/BT function Multi-Room Function &quot;MUZO&quot; App 4.0 Bluetooth  

Amplifier

科泰實業有限公司

Highlighted here is an AV receiver with an aluminum panel and VFD display. It is equipped with a high power transistor inside to ensure high performance. This AV receiver flaunts a classy and professional design and is great for upgrading your entertainment system.

Features: 	 Aluminum panel, VFD display.&nbsp; 	 Use high power transistor inside amplifier to ensure high performance. 	 100W x 7 CH (RMS, THD 0.7%@8 ohm). 	 HDMI/4K (2160 x 3840). 	 On screen display (OSD). 	 32 bit DSP (TI) decoding: Dolby TrueHD / Dolby Digital Plus / Dolby Digital /DTS-HD Master Audio / DTS ES.&nbsp;&nbsp;&nbsp; 	 Level adjustment for each channel. 	 Bass management. 	 Speaker distance/level auto-setup. 	 Each channel has 10 band to adjust PEQ. 	 Each band can adjust frequency/level/QL. 	 L/R channel balance adjustment.&nbsp;&nbsp;&nbsp; 	 Input sensitivity: 250 mV.&nbsp; 	 Input impedance: 47k ohm.&nbsp; 	 Dolby high performance Class A. 	 Full function remote control. 	 Power consumption during standby mode: &lt;0.5 W and auto power down (comply with EUP standard).&nbsp; 	 Classy and professional design. 	 Great for upgrading your entertainment system.  

Specifications: 	 100W x 7 CH (RMS, THD 0.7%@8 ohm). 	 Signal / noise ratio: 100 dB / 1K (A weighted). 	 Total harmonic distortion: &lt;0.009% (V in=200 mV, 1 W output). 	 Frequency range: 20 Hz &ndash; 60 kHz (stereo direct mode). 	 Audio analogue input sensitivity. 	 Impedance: 250mV / 47k ohm. 	 Video input sensitivity / impedance: 1Vp-p / 75 ohm.  
Terminals: 	 HDMI: 6 in, 2 out.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 	 Analogue composite: 3 in, 1 out. 	 SPDIF in: optical 2, coaxial 2. 	 Bluetooth digital: 1. 	 Internal build in or external module (optional). 	 Speaker output: 7 CH. 	 7.2 pre out, 2 subwoofer out (after Dolby DTS decoded).&nbsp;&nbsp; 	 Analogue audio input: 4 sets (RCA).&nbsp; 	 Record out L/R: 1 set. 	 &Phi;6.5mm headphone out: 1 . 	 &Phi;3.5mm MIC IN speaker (auto-setup).  
Tuning range: 	 FM 87.5 MHz - 108 MHz.&nbsp; 	 Auto or manual station search.&nbsp; 	 Auto preset search.&nbsp; 	 FM preset 20 stations.&nbsp; 	 Sensitivity: 1 &mu;V (30dB S/N).&nbsp; 	 THD: FM 0.7%. 	 Signal / noise ratio: FM 65 dB.&nbsp; 	 Antenna input: FM 75 ohm unbalance. 	 Main voltage: 220-240V~ 50Hz.  

AV Receiver

Shenzhen Music Way Technology Co.,Ltd.

M6 6-Channel Class D Amplifier with 8-Channel DSP · 630 Watts RMS  Features • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP (ADAU1452) • 32bit, 295 MHz DSP technology, controllable via new V3 PC software or Tunest App • Soft-Clipping (power attenuation) in 2 Ohm operation • Signal-to-noise Ratio ≥90dB • Frequency Response 15 Hz – 22 kHz (-3dB) • THD ≤0,1% (1 kHz, 4Ω, 90% Power) • Separately controllable input sensitivity (Channel 1-4, Channel 5-6), Clipping LEDs • Plug+Play with vehicle-specific cable sets • External Bluetooth® USB-Dongles BTS, BTS-HD &amp; BTA2 for Audio Streaming &amp; App Control (optional) • Digital remote control DRC1 with OLED display for controlling various DSP functions (optional)  Specification Power output(RMS) @ 13.8 VDC, 1% THD: 6 x 70/105 Watts RMS @ 4/2 Ohms or 3 x 210 Watts RMS @ 4 Ohms bridged 6 x High Level Input 8 – 20 V RMS 6 x RCA Low Level Input* (RCA) 2 – 6 V RMS 1 x AUX Input/Stereo (RCA) 2 – 6 V RMS 1 x Optical Input/Stereo (PCM, 96 kHz / 24 bit) 6 x Loudspeaker Output amplified 2 x Pre-Amplifier Output (RCA) 4 V RMS (configurable via DSP) Dimensions: 150 x 44 x 220 mm * only with optional MPK-RCA6/MPK-RCA6-PP cable set 

DSP Amplifier

廣州笙達電器有限公司

   音箱類型：2.0有源箱   喇叭單元：2x1&quot;/2x4'   額定阻抗/靈敏度：8ohm/82&plusmn;2dB   額定/最大功率：2x30W/2x50W   功放類型：D類功放   輸出功率：2x30W @ 8ohm   箱体：中縴板   表面處理：PVC  

揚聲器

 This stereo amplifier is rectangular shaped and comes in a classy black toned design. It is equipped with a super bass system and offers surround sound, echo (karaoke) effects. The stereo amplifier is controlled via an 18-key remote and is suitable for amplifying any type of audio.

Features:  	 Main voltage: 120V~60Hz or 220-240V~50Hz. 	 Continuous power output: 30W+30W (RMS) (8ohms, THD=0.05%). 	 5 inputs. 	 Surround sound, echo (Karaoke) effect. 	 Super bass system. 	 Independent bass and treble control. 	 Balance control motor driven volume. 	 MIC input. 	 18-key remote control. 	 Rectangular shape. 	 Classy design in a black tone. 	 With knob switches for operation. 	 With connection ports in the front. 	 Green function indicator lights. 	 Sleek and compact design. 	 Durable construction. 	 Ideal for amplifying any type of audio.  

Stereo Amplifier 

A101 2.0 Amplifier Metal case + black/silver painting 

A101 2.0 Amplifier

   音箱類型：2.0有源箱   喇叭單元：2x3''有源+2x3''無源   額定阻抗/靈敏度：4ohm/85&plusmn;2dB   額定/最大功率：2x15W/2x30W   功放類型：D類功放   輸出功率：2x15W @ 4ohm   箱体：中縴板   表面處理：牛仔布  

PA Amplifier with 5 Mic inputs, Mic talk-over function USB/SD Card Readder 4ohm/8Ohm/70V/100V Outputs LCD ith ID3 Tag Readout

Public Address Amplifier

10-Channel Class D Amplifier with 14-Channel DSP   Features • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP (ADAU1466) • 32bit, 295 MHz DSP technology, controllable via new V3 PC software or Tunest App • Signal-to-noise Ratio ≥95dB • Frequency Response 15 Hz – 22 kHz (-3dB) • THD ≤0,05% (1 kHz, 4Ω, 90% Power) • Separately controllable input sensitivity (Channel 1-8, Channel 9-10, AUX), Clipping LEDs • External Bluetooth® USB-Dongles BTS, BTS-HD &amp; BTA2 for Audio Streaming &amp; App Control (optional) • Digital remote control DRC1 with OLED display for controlling various DSP functions (optional)  Specification Output Power @ 13,8 VDC, 1% THD: 8 x 155 Watts RMS @ 2 Ω (Channel 1 - 8 DHR*) + 2 x 220 Watts RMS @ 2 Ω (Channel 9 / 10) 8 x 80/135 Watts RMS @ 4/2 Ω (Channel 1 - 8) + 2 x 120/220 Watts RMS @ 4/2 Ω (Channel 9 / 10) Output Power bridged @ 13,8 VDC, 1% THD: 4 x 310 Watts RMS @ 4 Ω (Channel 1 - 8 DHR*) + 1 x 440 Watts RMS @ 4 Ω (Channel 9 / 10) 4 x 270 Watts RMS @ 4 Ω (Channel 1 - 8) + 1 x 440 Watts RMS @ 4 Ω (Channel 9 / 10) 12 x High Level Input with EPS（CH 1-8: 8 - 24 V/RMS , CH 9-10: 8 - 32 V/RMS) 6 x RCA Low Level Input (RCA) 2 – 6 V RMS 1 x RCA AUX Input/Stereo 2 – 8 V RMS 1 x Optical Input/Stereo (PCM, 192 kHz / 24 bit) 4 x RCA Pre-Amplifier Output (configurable via DSP) 12 x Loudspeaker Output amplified Dimensions: 280 x 45.5 x 166 mm   

我的採購

確定要取消關注此供應商？

確定要取消關注此供應商？