宏オ拓展有限公司

This Signal Repeater is a power device to extend the transmission distance. SUB-1G RF frequency 868MHz or 915MHz wireless transmissionExtend the transmission distance up to 300m / 1000ft from transmitter(s) to receiver(s)Place the Signal Repeater in the middle of the transmitter and receiverThe LED indication will lit when receive a valid signal from the transmitter and the receiver will then receive the signal from the repeaterCan be wall mounted or table standSimple operation, just place and usePower On / Off button 

Wireless Signal Repeater

進達電子製品有限公司

- 802.11b/802.11g/802.11n/802.11ac
- IPv4 / IPv6
- 300MHz + 450MHz
- 2.4GHz &amp; 5GHz
- Transmit Power : 20dBm
- AP Modes : Repeater A.P. Bridge WDS
- Wired Speed : 10Mbps / 100Mbps / 1Gbps
- WAN LAN : WAN x 1 LAN x 4
- Antenna : 5dBi High Gain Antenna x 4
- Concurrent Sessions : +3,500
- Priority Control : QoS
- File Server Functionality : FTP server / SAMBA server/ BT client Security : 64/128 bit WEP / WPA-PSK / WPA2-PSK
- Wireless Connectivity : WPS supported
- DHCP Server : DHCPv4 / DPCHPv6
- Port Forwarding : Supported
- TR068 TR069 : Supported
- DLNA uPnP : DLNA media server built-in
- VPN : PPTP / L2TP / IPSEC
- USB connectivity : For external storage

Wi-Fi AC Router

 	 Hardware Features 	 Interface 	 10/100/1000Mbps LAN Ports x 4 	 10/100/1000Mbps WAN Port x 1Button 	 WPS/Reset Button 	 Wi-Fi On/Off cap-sense ButtonExternal Power Supply 	 100-240VAC, 9VDC 1000mA Euro Type (Default power adaptor, please specified at order placement)Antenna 	 detachable Antenna x 4 	 un-detachable antenna x 2USB Connectivity 	 USB 3.0 port x 1Wireless Standards 	 IEEE 802.11ac, IEEE 802.11n, IEEE 802.11g, IEEE 802.11bFrequency 	 2.4GHz 	 5GHzSignal Rate 	 5GHz: Up to 1800Mbps 	 2.4GHz: Up to 600MbpsReception Sensitivity 	 5GHz: 	 11a 6Mbps: -91dBm 	 11a 54Mbps: -73dBm 	 11ac HT20: -66dBm 	 11ac HT40: -67dBm 	 11ac HT80: -58dBm2.4GHz 	 11g 54M: -76dBm 	 11n HT20: -73dBm 	 11n HT40: -71dBmTransmit Power: 	 CE: &lt;20dBm(2.4GHz) 	 CE: &lt;23dBm(5GHz)Wireless Functions 	 Repeater and Access Points (A.P.)Wireless Security 	 64/128 bit WEP / WPA-PSK / WPA2-PSKNetwork Features 	 WAN Type 	 Dynamic IP / Static IPManagement 	 Access Control 	 Local Management 	 Remote ManagementDHCP 	 DHCPv4Protocols 	 Support IPv4  

A.C. Wi-Fi Router Repeater

警報城市有限公司

  Cordless Expander With Interchangeable Plug (CMEX-21)  
The&nbsp;CMEX-21&nbsp;is an multiport interface unit that plugs into the bed head of many common nurse call systems making them able to carry&nbsp;up&nbsp;to 5 wireless fall-prevention sensors and nurse call points.&nbsp;The CMEX-21 comes with a separate cable with plug because there will be&nbsp;some cases where&nbsp;6.3mm (1/4&quot;) plug connection may not fit the existing nurse call system socket.&nbsp;The&nbsp;interchangeable cable plug design allows the flexibility to change the connector types that used by nurse call providers.&nbsp; &nbsp;&nbsp;

  Features :   	 Interchangeable cable plug (NC-03) allows the flexibility for different connector types nurse call systems 	 433MHz receiver&nbsp;allows use of floor mats, bed / chair pad, call cord, wristband transmitter, bathroom alarm, motion sensor &amp; door alarm, up to 5 wireless devices 	 1 x 6.3mm (&frac14;&rdquo;) mono mic jack port for&nbsp;call cord 	 1 x RJ10 port for wired floor mat&nbsp; 	 Cord removal alert (with on/off switch to disable this function) 	 Compatible with normally open or normally closed systems 	 LEDs to indicate the alarm status &amp; error types 	 Button on the top for clearing alarm or pause function under no alarm condition 	 Pause function allows patient removal from bed 	 3 x AAA batteries or 5V DC adapter 	 A hanger clip &amp; a wall mount brcket is included  

Expander - Nurse Call Splitter for Cordless Devices

Guangdong Konix Technology Co.,Ltd

1，无线收发器2，发射电源：小于25 mW 3，接收灵敏度：-95dB 4，系统频率响应：30Hz-18kHz 5，延迟：小于3ms 6，抽样率：48kHz 7，信噪比：90dB 8，失真：小于0.5 TDH 9，动态范围：大于90dB 10，工作电流：发射器：小于90mA，接收器：小于110mA 11，变速箱距离：直线距离50m 12，适用于各种仪器，例如：电吉他，电钢琴，电动贝斯和电气风乐器 

Wireless Transceiver 

SHENZHEN ZEYUTONG ELECTRONICS CO.,LTD

(1) FHSS extender - Up to 1600 Sq.ft. (2) Compatible with all ZYS's baby monitoring devices 

ZRP300 2.4G Repeater Amplifier

麗光科技股份有限公司

Strengthen Bluetooth Signal PowerEnlarge the control areaSPECPart NumberPower Supply eTransmission RangeOperating EnvironmentBLI-ER-MU05-BT01Micro USB30-50M-20°C~45°C 5~80%RH 

Indoor Repeater

Bridge Between Internet and BLTC Mesh networkWifi Range: 10MBT Mesh Range: 50-70MSPECPart NumberInput VoltagePower ConsumptionOperation ConditionBLI-GW-MU05-M015V DC2.5W-20°C~45°C, 5~80%RH

GATEWAY (Desk Type /Ceiling Type)

Bridge Between Internet and BLTC Mesh networkWifi Range: 10MBT Mesh Range: 50-70MSPECPart NumberInput VoltageBT RangeWifi RangeOperating EnvironmentBLI-GW-V12-BT0112V DC/AC30-50M10-15M-20°C~45°C 5~80%RH

Gateway Wire Type

Hanri lighting Co.,Ltd.

DESCRIPTIONWhen distance between gateway and light is too long(eg, greater than 200 feet), Range Extenders can be added between Gateway and lights, They amplify and reinforce the signals between all system devices, functioning as a ''mesh network''. Signal quality can be weakened by obstacles (walls, terrain, trees, etc,), temporary interference (other signals,static, electrical noise, magnetic fields, etc,), climate factors and more. For a stable setup, you must prevent sections of your bt network from losing connection by establishing a robust chain of range extenders (RE). Each extender is tied to one network only. When several networks exist on the same property, independent groups of extenders will be required for each network.   Hanri SMRESurface mounted range extender ideal for use in hardscape areas or on the exterior walls of structures. Installed where spacing between fixtures is significant, where elevation or obstructions might interupt signal and simply to strengthen the overall network. Mounting ears for attachment to vertical surfaces.5' wire lead.Add removable ½" threaded base to attach to RMB canopy mount or another base.Indicator light displays green when RE is active in a network.I watt.TypeRange ExtenderInput Voltage12V AC/DCControlWireless data transmission, app controlledOperating Frequency2403MHz x 2480MHzTransmission Range230 Ft. Max.HousingPolycarbonateWire5 inch ,18 AWG SPT-2WUsageFor lamps ONLYWarrantyFive year warrantyIP65 

Range Extenders BLE

Strengthen Bluetooth Signal PowerEnlarge the control areaIP65SPECPart NumberInput VoltagePower ConsumptionTransmission RangeOperation ConditionBLI-ERO-V12-BT0112V DC/AC0.5W50-70M-20°C~45°C, 5~80%RH

Outdoor Repeater

智略企業有限公司

***HUAWEI WiFi Mesh 7 WS8800 AX6600 Router Wi-Fi 6+ 6600Mbps 2.4GHz&amp;5GHz By FedEx*** Free Fed-ex Shipping to USA,Canada,UK,Germany,Australia,Japan !!! BrandHUAWEIFrequency band classTribandFrequency5GHzIncluded ComponentsGetting Started Guide and Safety Information, Power Adapter, Router, Network AdapterConnectivity technologyEthernet, Wi-FiColorWhiteControl methodApplicationController typeControl by applicationInstalled RAM size512MBDescriptionReport ItemHuawei WiFi Mesh 7 Router AX6600 Whole Home Coverage Bandwidth Signal Repeater One-Touch Connect HarmonyOS Mesh Wi-Fi AmplifierHUAWEI WiFi Mesh 7AX6600 Whole Home Coverage | HarmonyOS Mesh+ | One-Touch Connect 

HUAWEI WiFi Mesh 7 WS8800 AX6600 Router Wi-Fi 6+ 6600Mbps 2.4GHz&5GHz By FedEx

Uwin Technologies Co., Ltd

This wireless repeater comes with a robust structure offering an extra-long serving time. The antenna is sturdily attached offering a sensitive response. This DECT device is an excellent choice for homes, offices and so on.
 
  Easy to install. 
  Available in different designs. 
 

Wireless Repeater

泉州寶捷電子有限公司

UHF Repeater with BJ-851 16 Memory Channels 
1.10MHz frequency spacing in 400-470MHz 
2.16 memory channels 
3.For Walkie Talkie
Small Power UHF Repeater with 16 Memory Channels BJ-851 BJ-851 Repeater for Walkie Talkie 
Current:
Standby current: 0.3A
Rx current: 0.8A
Tx current: 3.0A
Frequency stability: &ge;2.5PPM
Channel spacing: 25/12.5kHz
Weight: 3kg
Output power: 10W (maximum)
Receiving end insertion loss: &le;2dB
Transmitting end insertion loss: &lt;1.5dB
Transmitting/receiving end isolation: &ge;60dB
VSWR: 1.5 (maximum)
Operating temperature range: -30 to 60&deg;C
Frequency stability: 2.5PPM/&deg;C
Matched impedance: 50&Omega;
Receiver: 
Simplex sensitivity: &ge;0.3uV (12dB SINAD)
Duplex sensitivity: &lt;3dB
Squelch sensitivity: &ge;0.2uV
Selectivity: -70dB
Spurious radiation: -75dB
Inter modulation rejection: -75dB
Residual noise: -45dB
DEMP FO: 6 &plusmn; 3dB
Audio output power: 4.0W
Audio distortion: &lt;5%
Working mode: receiving
Transmitter: 
Output power: 5 to 10W
Spurious radiation: &le;80dB
Residual modulation: -45dB
Audio distortion: &lt;5%
Modulation: 5kHz (maximum)
Pre-emphasis frequency: 6 &plusmn; 3dB
Working mode: transmitting
CPU controller:
Receiving/transmitting frequency setting
Automatic repeater setting
PC programming
CTCSS and DCS General
Frequency Range:
400-470 MHZ
Frequency Spacing:
10MHz
Duplex Band Width:
1MHz
Modulation Type:
FM 16F3
Operating Voltage:
12-14V
Current:
standby current : 0.3A Rx current : 0.8A Tx current :3.0A
Frequency Stability:
&ge;2.5 PPM
Channel spacing:
25kHz
Weight:
Approx 3kg
Specification of Duplexer
Frequency Spacing (MHz):
10MHz
Max Output Power (W):
10W
Receiving End Insertion loss (dB):
&le;2dB
Transmitting End Insertion loss (dB):
&lt;1.5dB
Transmitting-Receiving End Isolation (dB)
&ge;60dB
Max VSWR:
1.5
Operating Temperature Range:
-30-----+60&deg;C
Frequency Stability:
Approx 2.5PPM/&deg;C
Matched Impedance:
50&Omega;
Receiver
Simplex Sensitivity:
&ge;0.3uV(12dB SINAD)
Duplex Sensitivity:
&lt;3dB
Squelch Sensitivity
&ge;0.2uv
Selectivity:
-70dB
Spurious Radiation:
-75dB
Intermodulation Rejection:
-75dB
Residual Noise:
-45dB
DEMP FO:
6&plusmn;3dB
Audio Output Power:
4.0W
Audio Distortion:
&lt;5%
Working Mode:
receiving mode
Transmitter
Output Power:
5-10W
Spurious Radiation:
&le;80dB
Residual Modulation:
-45dB
Audio Distortion:
&lt;5%
Max Modulation:
5kHz
Pre-emphasis Frequencies:
6&plusmn;3dB
Working Mode:
Transmitting Mode
CPU Controller
Receiving-Transmitting Frequency Setting
Automatic Repeater Setting
PC Programming
CTCSS and DCS

UHF Spacing 10MHz 10W Repeater BJ-851

World Class Intelligence Limited

Infrared Repeater

佛山市禪信通科技有限公司

Features:   Provide quick coverage solution for weak and blind mobile signal zones.   Reduce drop/off calls and improve communication quality.   Compact size, elegant design, easy installation and operation.   High gain, low consumption, low interference to BTS.   Reduce cellphone transmit power and radiation, extend cellphone battery life.   LED light working and signal condition indicators.   ALC (adaptive logic circuit) can limit stable output power to ensure steady signal coverage.   MGC (manual gain control) function design to ensure the GSM 900MHz mobile signal coverage more flexible.   Apply to approximate 200~500 square meters coverage.   Effective device for boosting mobile phone signals.  Technical parameters:    Uplink: 890-915MHz, downlink: 935-960MHz.   Gain: 65&plusmn;3dB.   Output power: 17&plusmn;2dBm.   Power consumption &le;4W.   DC: +5V.   RF connector: N-female.   Weight: &le;0.5kg.   Size: 142 x 90 x 21mm.  

Single Wide Band Mini GSM Repeater

 Features:    Offer convenient signal amplification for weak and blind 2100MHz mobile signal zones.   Reduce drop/off calls and improve communication quality.   Sleek size.   Stylish design.   Easy installation and operation.   High gain, low consumption, low interference to BTS.   Reduce cellphone transmit power and radiation, extend cellphone battery life.   LED light working and signal condition indicators.   Works in all countries 2100MHz is in use.   Apply to approximate 200~500 square meters mobile signal coverage.   To amplify both 2100MHz mobile signal frequency.   Perfect indoor repeater solution of 2100MHz mobile signal extender.  Technical parameters:    Frequency: WCDMA: uplink (1920-1980MHz). Downlink (2110-2170MHz);   Gain: uplink (55&plusmn;2dB). Downlink (60&plusmn;2dB).   Output power: &ge;15dBm.   Power consumption: &lt;15W.   Power supply: DC: 9V/2A.   RF connector: SMA-female.   Weight: &le;1kg.   Size: 183 x 127 x 50mm.  

Single Wide Band WCDMA Repeater

Features:   For covering weak and blind mobile signal zones.   Reduce drop/off calls and improve communication quality effectively.   Compact size.   Elegant design.   Easy to install and maintain.   High gain, low consumption, low interference to BTS.   Reduce cellphone transmit power and radiation, extend cellphone battery life.   LED light working and signal condition indicators.   ALC (adaptive logic circuit) can limit stable output power to ensure steady signal coverage.   Apply to approximate 200~500 square meters coverage.   Convenient device for amplification of cell phone signals.  Technical parameters:    Gain: 65&plusmn;2dB.   Output power: 10&plusmn;2dBm.   Power consumption &le;4W.   DC: +5V.   RF connector: N-female.   Weight: &le;0.5kg.   Size: 142 x 90 x 21mm.  

Single Wide Band Mini PCS Repeater

泉州市新世紀電子通訊有限公司

 	 Land mobile transceiver and vehicle radio. 	 RF power output: 60W/40W. 	 Frequency range: VHF: 136-174MHz, 245-260MHz; UHF: 400-440MHz, 440-480MHz. 	 Channel: 200. 	 Channel scan. 	 VOX. 	 107 DCS. 	 50 CTCSS. 	 Priority scan. 	 Ani code. 	 DTMF code. 	 Hi/Lo power. 	 Time-out timer. 	 PC programmable. 	 Busy channel lockout. 	 Selectable squelch level. 	 CO/TO/SE scan switchable. 	 PLL channel spacing: 5/6.25/10/12.5/25kHz. 	 Programmable 25kHz (wide)/12.5kHz (narrow) channel spacing. 	 Battery voltage: 13.8V. 	 Antenna impedance: 50&Omega;. 	 Trade terms: FOBXiamen or FOBShenzhen. 	 Operating temperature: -20 to +60&deg;C. 	 Frequency stability: &plusmn;2.5PPM. 	 Compatible with American military standard (MIL-STD-810C/D/E). 	 Weight (without antenna): 11g. 	 Packaging: one main unit with standard accessories in a gift box.  

Intercom Repeater

普捷科技有限公司

   DCS mini cellphone indoor repeater 1710-1880MHz 40dB (MD-40)   The ClearCast mini indoor repeater is ideally suitable for providing and/or improving cellular reception not only voice, also high data rate communication like HSPA/HSPA+ (mobile internet).   Its superior amplification and high quality, intuit installation makes DIY easily by the end user which is suitable for home, house, office, coffee shop ...  Features:   DIY kit, all accessories included   Coverage: 70m2-150m2 (or more)   OEM/ODM negotiable  

DCS Repeater

   Small site CDMA repeater 824-894 MHz 45dB (SC-45).&nbsp;   The small site wireless reception repeater is ideally suited for providing and/or improving cellular reception in residential homes, workshops, small-sized parking garages, basements and small office areas.   It is end-user orientation-easy Installation, DIY kit, adequate accessories for installation, unique 5 color LED level indicators.   Easy to find base station.   15m coaxial cable with pre-installed connectors.   Just with install TV antenna experience, customer may easily complete the small site indoor repeater installation.  Features:   Improve indoor cellphone communication, coverage area 60-300m2   Reduce radiation from cellphone, helpful for human health   Built-in AGC circuit, free of interference   Unique LED level indicators, easy to find base station   Extand lifespan of cellular phone battery   DIY kit, adequate accessories inculded, easy to install  

CDMA Repeater

   Small site DCS Repeater 1710-1880 MHz 50dB(SD-50).   The small site wireless reception repeater is ideally suited for providing and/or improving cellular reception in residential homes, workshops, small-sized parking garages, basements and small office areas.   It is end-user orientation-easy installation, DIY kit, adequate accessories for installation, unique 5 color LED level indicators,&nbsp;easy to find base station.   15m coaxial cable with pre-installed connectors.   Just with install TV antenna experience, customer may easily complete the small site indoor repeater installation.  Features:   Improve indoor cellphone communication, coverage area 60-200m2   Reduce radiation from cellphone, helpful for human health   Built-in AGC circuit, free of interference   Unique LED level indicators, easy to find base station   Extand lifespan of cellular phone battery   DIY kit, adequate accessories inculded, easy to install  

   Small Site GSM repeater 890-960MHz 45dB(SG-45).   The small site wireless reception repeater is ideally suited for providing and/or improving cellular reception in residential homes, workshops, small-sized parking garages, basements and small office areas.   It is end-user orientation-easy Installation, DIY kit, adequate accessories for installation, unique 5 color LED level indicators.   Easy to find base station.   15m coaxial cable with pre-installed connectors.   Just with install TV antenna experience, customer may easily complete the small site indoor repeater installation.  Features:
   Improve indoor cellphone communication, coverage area 60-200m2   Reduce radiation from cellphone, helpful for human health   Built-in AGC circuit, free of interference   Unique LED level indicators, easy to find base station   Extand lifespan of cellular phone battery   DIY kit, adequate accessories inculded, easy to install  

GSM Repeater 

   Dual band indoor repeater SGU-5055   The ClearCast Dual Band Indoor Repeater is capable of providing and improving cellular reception not only audio, also supporting high data rate communication like HSPA / HSPA+ (mobile internet).   Its superior amplification and high quality design, together with the hassle-free DIY installation made it suitable for home , house , office , coffee shop or any indoor location.  Features:   Improve/provide indoor cellphone reception.   2G, 3G, HSPA, HSPA+ full dual band operation   Coverage area: 3000 ft2 (300 m2), 5000ft2(500m2)(by using optional antenna).   Loop oscillation alarm indication.   User-orientated design.   DIY kit with essential accessories included.   Simple installation process.  

我的採購

確定要取消關注此供應商？

確定要取消關注此供應商？