成都微敦信財貿易有限公司

产品介绍： Weidun®LQ006聚氨酯无溶剂液体防水膜，系一款即用型液态聚氨酯防水塗層 。采用无溶剂配方，具有永久弹性、可常温施工、常温固化，单组份设计，提供持久高效嘅防水保护。  适用地方： Weidun®LQ06 本产品专为对卫生要求高嘅场所防水而设计，例如饮用水设施、食品工业厂房，同埋其他潮湿或具腐蚀性环境。  产品优点：  单组份设计——开罐即用，可喷涂或辊涂，施工简便可长期浸水使用，防水性能持久抵挡水同各类水性化学物质无溶剂配方——安全环保，适合饮用水池等接触水体嘅防水工程 储存同处理:  请存放喺清洁、干爽、通风嘅地方，避免日光直射同极端温度。使用前后要盖好罐口，防止杂物同潮气进入。施工同储存期间，请注意环境条件，确保安全。  尺寸参数: Pail Size* 20L Pail Height 340.0mm Pail Diameter 270mm Pail Weight 20.0 kg Pails per Pallet 64 Full Pallet Weight 1.6 ton 产品技术参数Property Standard Minimum Value Weidun Value Solid content (%) 85 86.2 Surface dry time (%) 12 7 Through dry time (hours) 24 12 Tensile Strength at 23°C (N/50mm) 2.0 2.1 Elongation at 23°C +/-2°C, (%) 500% 580 Adhesive strength at 23°C(N/50mm) 1.5 1.5 Low temperature flexibility, at -35°C No crack No crack Water absorption (%) 5 3.3 Shore A hardness after 7 days 65 65 Crack bridging ability under standard conditions (mm) 4 4.22 Water penetration (Maintain a water pressure of 1.5bar for 7 days) Non-penetration Non-penetration  

聚氨酯防水塗層

Canton Refined Gifts Manufacture Co., Limited

 	 Capacity:230ml 	 Material:PVC Rubber  

PVC Rubber Mug

 	 Size:4.7*0.3*6.3cm 	 Material:PVC Rubber  

PVC Rubber Christmas Series Magnet

Shandong Xianglong New Materials Corp

 	 Our company mainly products--modified engineering plastics including glass fiber reinforced, flame retardant, super tough, anti-static, UV-resistant, plastics alloy, related to military, civil, industrial fields, such as automobiles, home appliances, electronics, textiles, medical equipment, industrial machinery, sports goods, construction materials, sheet, board, tubing, aerospace and so on.  

Modified Engineering Plastics

Vodapruf Sdn Bhd

LIGHTHERM is a lightweight aggregate specially treated with our patented VODAPRUF additive. LIGHTHERM when mixed with cement, becomes a lightweight screed (LIGHTHERM Screed) - density of only 250kg/m&sup3;. It achieved thermal conductivity - as low as 0.067 W/mk. LIGHTHERM Screed has acquired COC (Certificate of Conformity) issued by T&Uuml;V S&Uuml;D PSB Singapore. LIGHTHERM Screed is suitable for indoor and outdoor applications.

Lightherm

貴州航天實業有限公司

Silica Aerogel Powders 

High quality silica aerogel powder
1.Low thermal conductivity
2.Good thermal insulation property
3.Strong adsorptive


Silica Aerogel Powders 

深圳市紅葉杰科技有限公司

   Application&nbsp;for&nbsp;silicone&nbsp;rubber&nbsp;for&nbsp;insole&nbsp;making:&nbsp;   

silicone&nbsp;rubber&nbsp;for&nbsp;insole&nbsp;making&nbsp;is&nbsp;a&nbsp;kind&nbsp;of&nbsp;addition&nbsp;cure&nbsp;silicone&nbsp;rubber.&nbsp;It&nbsp;is&nbsp;primarily&nbsp;intended&nbsp;for&nbsp;silicone&nbsp;insole&nbsp;as&nbsp;a&nbsp;kind&nbsp;of&nbsp;foot&nbsp;care&nbsp;silicone&nbsp;rubber.&nbsp;With&nbsp;two&nbsp;component&nbsp;silicone&nbsp;rubber&nbsp;part&nbsp;A&nbsp;and&nbsp;part&nbsp;B,&nbsp;mixing&nbsp;ratio&nbsp;is&nbsp;1:1.&nbsp;Generally&nbsp;the&nbsp;color&nbsp;is&nbsp;translucent&nbsp;or&nbsp;transparent.
&nbsp;
   Operation&nbsp;for&nbsp;silicone&nbsp;rubber&nbsp;for&nbsp;insole&nbsp;making:&nbsp;   
&nbsp;
During&nbsp;operate&nbsp;the&nbsp;three&nbsp;impotant&nbsp;thing&nbsp;to&nbsp;pay&nbsp;attention&nbsp;:&nbsp;
1.&nbsp;weigh&nbsp;theliquid&nbsp;silicone&nbsp;rubber&nbsp;and&nbsp;curing&nbsp;agent&nbsp;exatly&nbsp;.&nbsp;
2.&nbsp;Stir&nbsp;theliquid&nbsp;silcone&nbsp;rubber&nbsp;and&nbsp;curing&nbsp;agent&nbsp;evenly&nbsp;.&nbsp;
3.we&nbsp;should&nbsp;choose&nbsp;the&nbsp;right&nbsp;hardness&nbsp;to&nbsp;making&nbsp;product.
&nbsp;
   Storage&nbsp;for&nbsp;silicone&nbsp;rubber&nbsp;for&nbsp;insole&nbsp;making:   

silicone&nbsp;rubber&nbsp;for&nbsp;insole&nbsp;making&nbsp;is&nbsp;an&nbsp;environmentally-friendly&nbsp;liquid&nbsp;silicone&nbsp;product,&nbsp;is&nbsp;not&nbsp;easy&nbsp;to&nbsp;burn&nbsp;and&nbsp;can&nbsp;be&nbsp;stored&nbsp;and&nbsp;transported&nbsp;as&nbsp;nonhazardous&nbsp;goods.&nbsp;The&nbsp;shelf&nbsp;life&nbsp;of&nbsp;the&nbsp;product&nbsp;is&nbsp;about&nbsp;12&nbsp;months&nbsp;from&nbsp;the&nbsp;date&nbsp;of&nbsp;production.&nbsp;Inspection&nbsp;is&nbsp;required&nbsp;when&nbsp;exceeding&nbsp;the&nbsp;time&nbsp;limited.&nbsp;It&nbsp;can&nbsp;continue&nbsp;to&nbsp;be&nbsp;used&nbsp;in&nbsp;case&nbsp;of&nbsp;neither&nbsp;thickening&nbsp;nor&nbsp;deterioration.&nbsp;&nbsp;
&nbsp;
   Certificate&nbsp;of&nbsp;silicone&nbsp;rubber&nbsp;for&nbsp;insole&nbsp;making:   

ISO9001:&nbsp;HK05/01358&nbsp;
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8
&nbsp;
   Package&nbsp;for&nbsp;silicone&nbsp;rubber&nbsp;for&nbsp;insole&nbsp;making:   
&nbsp;
5kg/drum,&nbsp;20kg/drum&nbsp;and&nbsp;200kg/drum
&nbsp;
&nbsp;

Silicone Rubber for Insole Making

   trademark&nbsp;silicone&nbsp;rubber,silicone&nbsp;rubber&nbsp;for&nbsp;trademark&nbsp;Application:   

trademark&nbsp;silicone&nbsp;rubber,silicone&nbsp;rubber&nbsp;for&nbsp;trademark&nbsp;is&nbsp;particu
arly&nbsp;suitable&nbsp;for&nbsp;the&nbsp;following&nbsp;elastomeric&nbsp;articles:&nbsp;baby&nbsp;nipples,medical&nbsp;tubs,&nbsp;cake&nbsp;molds,&nbsp;food&nbsp;molds,&nbsp;sealing&nbsp;elements,&nbsp;O-rings,&nbsp;stoppers,&nbsp;diaphragms,&nbsp;keypads,&nbsp;bellows,&nbsp;vibration&nbsp;dampers,&nbsp;air&nbsp;vent&nbsp;flaps,&nbsp;switch&nbsp;covers,&nbsp;pressure&nbsp;cookers&nbsp;parts,&nbsp;cable&nbsp;connectors&nbsp;s.o.

   trademark&nbsp;silicone&nbsp;rubber,silicone&nbsp;rubber&nbsp;for&nbsp;trademark&nbsp;Recommendations:   
&nbsp;
Readytouse&nbsp;mixtures&nbsp;(of&nbsp;the&nbsp;components&nbsp;A&nbsp;and&nbsp;B)&nbsp;are&nbsp;fed&nbsp;directly&nbsp;tothe&nbsp;injection&nbsp;molding&nbsp;machine&nbsp;from&nbsp;the&nbsp;original&nbsp;containers&nbsp;by&nbsp;meansof&nbsp;a&nbsp;metering&nbsp;and&nbsp;mixing&nbsp;unit.&nbsp;The&nbsp;mixture,&nbsp;consisting&nbsp;of&nbsp;the&nbsp;two&nbsp;components&nbsp;in&nbsp;the&nbsp;ratio&nbsp;1:1,&nbsp;is&nbsp;injected&nbsp;into&nbsp;the&nbsp;heated&nbsp;mould.&nbsp;Because&nbsp;of&nbsp;low&nbsp;viscosity,&nbsp;the&nbsp;injection&nbsp;daospeed&nbsp;and&nbsp;injection&nbsp;pressureneed&nbsp;to&nbsp;be&nbsp;carefully&nbsp;adjusted&nbsp;so&nbsp;that&nbsp;the&nbsp;injection&nbsp;time&nbsp;can&nbsp;be&nbsp;decreased.&nbsp;At&nbsp;mould&nbsp;temperatures&nbsp;of&nbsp;170&nbsp;-&nbsp;230&deg;C,&nbsp;the&nbsp;addition&nbsp;-crosslinking&nbsp;silicone&nbsp;rubber&nbsp;vulcanises&nbsp;free&nbsp;of&nbsp;dissociation&nbsp;products&nbsp;within&nbsp;a&nbsp;few&nbsp;seconds.&nbsp;Excellent&nbsp;flowability&nbsp;and&nbsp;easy&nbsp;demoulding&nbsp;permit&nbsp;fully&nbsp;automated&nbsp;production&nbsp;of&nbsp;large&nbsp;numbers&nbsp;of&nbsp;articles&nbsp;in&nbsp;shorter&nbsp;total&nbsp;cycle&nbsp;times.

   trademark&nbsp;silicone&nbsp;rubber,silicone&nbsp;rubber&nbsp;for&nbsp;trademark&nbsp;Package:   
&nbsp;
20kg/drum&nbsp;part&nbsp;A&nbsp;+&nbsp;20kg/drum&nbsp;part&nbsp;B&nbsp;and&nbsp;200kg/drum&nbsp;part&nbsp;A&nbsp;+&nbsp;200kg/drum&nbsp;part&nbsp;B.
&nbsp;
   trademark&nbsp;silicone&nbsp;rubber,silicone&nbsp;rubber&nbsp;for&nbsp;trademark&nbsp;Certification:   
&nbsp;
ISO9001:&nbsp;HK05/01358&nbsp;
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8
&nbsp;
&nbsp;
&nbsp;

Trademark Silicone Rubber, Silicone Rubber For Trademark

   silicone&nbsp;rubber&nbsp;for&nbsp;coating&nbsp;textile Application:   

silicone&nbsp;rubber&nbsp;for&nbsp;coating&nbsp;textile&nbsp;is&nbsp;specially&nbsp;used&nbsp;for
skidproof&nbsp;purpose&nbsp;of&nbsp;frilals,&nbsp;underclothes&nbsp;and&nbsp;widely&nbsp;applied&nbsp;for&nbsp;cotton&nbsp;fabric,&nbsp;polyestermixed&nbsp;cotton&nbsp;cloth,&nbsp;nylon&nbsp;cloth,&nbsp;flax,&nbsp;woolen,&nbsp;insulating&nbsp;cloth,&nbsp;etc.

   silicone&nbsp;rubber&nbsp;for&nbsp;coating&nbsp;textile&nbsp;Specification:   
&nbsp;
1)&nbsp;long&nbsp;working&nbsp;time&nbsp;during&nbsp;room&nbsp;temperature,
2)&nbsp;Vulcanizing&nbsp;quickly&nbsp;under&nbsp;high&nbsp;temperature,
3)&nbsp;Non&nbsp;heavy&nbsp;metal&nbsp;and&nbsp;solvent,&nbsp;non-toxic&nbsp;and&nbsp;innocuity&nbsp;to&nbsp;human&nbsp;body.
4)&nbsp;Excellent&nbsp;third&nbsp;dimension&nbsp;and&nbsp;softness&nbsp;after&nbsp;using&nbsp;the&nbsp;silicone&nbsp;rubber&nbsp;to&nbsp;the&nbsp;textile.
&nbsp;
   silicone&nbsp;rubber&nbsp;for&nbsp;coating&nbsp;textile&nbsp;Operation&nbsp;guideline:   
&nbsp;
1)&nbsp;Stirring&nbsp;A&nbsp;and&nbsp;B&nbsp;to&nbsp;uniformity&nbsp;before&nbsp;using.
2)&nbsp;Mixing&nbsp;A&nbsp;and&nbsp;B&nbsp;component&nbsp;according&nbsp;to&nbsp;A:&nbsp;B&nbsp;=&nbsp;1:1&nbsp;by&nbsp;weight&nbsp;or&nbsp;volume,&nbsp;coating&nbsp;the&nbsp;mixture&nbsp;on&nbsp;the&nbsp;textile&nbsp;or&nbsp;socks.&nbsp;
3)&nbsp;Baking&nbsp;the&nbsp;textile&nbsp;or&nbsp;socks&nbsp;in&nbsp;drying&nbsp;oven&nbsp;for&nbsp;1-3min.
&nbsp;
   silicone&nbsp;rubber&nbsp;for&nbsp;coating&nbsp;textile&nbsp;Shelf&nbsp;life:   
&nbsp;
8-10&nbsp;months&nbsp;when&nbsp;stored&nbsp;under&nbsp;24&deg;C&nbsp;in&nbsp;original&nbsp;unopened&nbsp;packages.
&nbsp;
   silicone&nbsp;rubber&nbsp;for&nbsp;coating&nbsp;textile&nbsp;Package:   
&nbsp;
20kg/drum,25kg/drum&nbsp;and&nbsp;200kg/drum

   silicone&nbsp;rubber&nbsp;for&nbsp;coating&nbsp;textile&nbsp;certification:   

ISO9001:&nbsp;HK05/01358&nbsp;
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8

   silicone&nbsp;rubber&nbsp;for&nbsp;coating&nbsp;textile&nbsp;package:   

20kg/drum,25kg/drum&nbsp;and&nbsp;200kg/drum
&nbsp;
&nbsp;
&nbsp;
&nbsp;
&nbsp;
&nbsp;
&nbsp;

Silicone Rubber for Coating Textile

貴州省羅甸縣明盛礦業有限公司

 	 Silicone is a chemical element with symbol Si and atomic number 554 . 	 It is a tetravalent metalloid, more reactive than germanium, the metalloid directly below it in the table.  

 554 Silicone

讚鴻企業有限公司

   Thermal conductive soft pads are specially designed for the purpose of high performance thermally conductivity to solve some of most difficult thermal problems.   The material is made to conform to the irregular surface under moderate application pressures.   The products are&nbsp; widely applied to electronic parts such as IC, CPU, LED, laptops, PC, DVD application and so on. It has also been used in memory modules, heat pipe assemblies, voltage regulators and automotive electronics.   Fiber glass carrier can be added for improved mechanical strength and also provides an adhesive for improved application performance.   Ranges from normal to high thermal conductivity.   High self-adhesion performance on surface to reduce contact resistance.   High temperature endurance with UL recognized flammability rating.   Available with and without PSA.   Customized die-cut service available upon customers' request.   Meet RoHS specification.  

Thermal Conductive Soft Pads

   Injection&nbsp;molding&nbsp;silicone&nbsp;rubber&nbsp;for&nbsp;jewelry&nbsp;casting Application:   
&nbsp;
1.&nbsp;Silicone&nbsp;Medical&nbsp;products
2.&nbsp;Silicone&nbsp;Food&nbsp;grade&nbsp;products
3.&nbsp;Silicone&nbsp;Baby&nbsp;product
4.&nbsp;Silicone&nbsp;Household&nbsp;product
5.&nbsp;Crafts&nbsp;and&nbsp;Gift&nbsp;product
6.&nbsp;Silicone&nbsp;Industries&nbsp;in&nbsp;all&nbsp;areas
&nbsp;
   Injection&nbsp;molding&nbsp;silicone&nbsp;rubber&nbsp;for&nbsp;jewelry&nbsp;casting recommendations:   
&nbsp;
Readytouse&nbsp;mixtures&nbsp;(of&nbsp;the&nbsp;components&nbsp;A&nbsp;and&nbsp;B)&nbsp;are&nbsp;fed&nbsp;directly&nbsp;tothe&nbsp;injectionmoulding&nbsp;machine&nbsp;from&nbsp;the&nbsp;original&nbsp;containers&nbsp;by&nbsp;meansof&nbsp;a&nbsp;metering&nbsp;and&nbsp;mixing&nbsp;unit.&nbsp;The&nbsp;mixture,&nbsp;consisting&nbsp;of&nbsp;the&nbsp;two&nbsp;components&nbsp;in&nbsp;the&nbsp;ratio&nbsp;10:1,&nbsp;is&nbsp;injected&nbsp;into&nbsp;the&nbsp;heated&nbsp;mould.&nbsp;Because&nbsp;of&nbsp;low&nbsp;viscosity,&nbsp;the&nbsp;injection&nbsp;daospeed&nbsp;and&nbsp;injection&nbsp;pressure&nbsp;need&nbsp;to&nbsp;be&nbsp;carefully&nbsp;adjusted&nbsp;so&nbsp;that&nbsp;the&nbsp;injection&nbsp;time&nbsp;can&nbsp;be&nbsp;decreased.&nbsp;At&nbsp;mould&nbsp;temperatures&nbsp;of&nbsp;170&nbsp;-&nbsp;230&deg;C,&nbsp;the&nbsp;addition&nbsp;-crosslinking&nbsp;silicone&nbsp;rubber&nbsp;vulcanises&nbsp;free&nbsp;of&nbsp;dissociation&nbsp;products&nbsp;within&nbsp;a&nbsp;few&nbsp;seconds.&nbsp;Excellent&nbsp;flowability&nbsp;and&nbsp;easy&nbsp;demoulding&nbsp;permit&nbsp;fully&nbsp;automated&nbsp;production&nbsp;of&nbsp;large&nbsp;numbers&nbsp;of&nbsp;articles&nbsp;in&nbsp;shorter&nbsp;total&nbsp;cycle&nbsp;times.
&nbsp;
   Injection&nbsp;molding&nbsp;silicone&nbsp;rubber&nbsp;for&nbsp;jewelry&nbsp;casting Shelf&nbsp;life:   

8-10&nbsp;months&nbsp;when&nbsp;stored&nbsp;under&nbsp;24&deg;C&nbsp;in&nbsp;original&nbsp;unopened&nbsp;packages.
&nbsp;
   Injection&nbsp;molding&nbsp;silicone&nbsp;rubber&nbsp;for&nbsp;jewelry&nbsp;casting Package:   
&nbsp;
Packed&nbsp;in&nbsp;20kg/pail&nbsp;+&nbsp;20kg/pail&nbsp;and&nbsp;200kg/pail&nbsp;+&nbsp;200kg/pail.
&nbsp;
   Injection&nbsp;molding&nbsp;silicone&nbsp;rubber&nbsp;for&nbsp;jewelry&nbsp;casting Certification:   
&nbsp;
ISO9001:&nbsp;HK05/01358&nbsp;
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8
&nbsp;
&nbsp;

Injection Molding Silicone Rubber For Jewelry Casting

鎬端新材料有限公司

Commodity Name: THEIC
Chemical Name: Tris (2-Hydroxyethyl) Isocyanurate
Molecular Formula： C9H15N3O6
Molecular Weight：261

Main Technical Specifications:
Appearance: White crystal powders or granules
Melting Point： 133.5-137℃
Hydroxyl Value：640&plusmn;10 (KOHmg/g)
Acidity：&le;1.0 (KOHmg/g)
pH ：6.5~7.3
Turbidity：&le;1.0PPM
Content of Water：&le;0.3%

Application：
Used as an important raw material for the production of heat &ndash; resistant wire enamels and lacquer with extremely good mechanical properties, water &ndash; based baking lacquer, unsaturated polyester resins, plasticizing agent, insecticide.&nbsp;

Packaging：
25kgs, 500kgs, 800kgs &amp; 1,000kgs plastic woven bag lined with plastic bag inside.

THEIC 賽克 Tris (2-Hydroxyethyl) Isocyanurate

三東洋行有限公司

   Pelprene is the commercial name of Toyobo' s thermoplastic polyester elastomers. Pelprene elastomers are widely used in automobiles, electrical and electronic equipment, industrial equipment, wire and cable covers, sporting goods, and many sectors.  

Resin Thermoplastic Polyester Elastomer X-168D (TPEE)

SHANTOU HAICHAOXING SCIENCE & TECHNOLOGY CO., LTD.

 	 RTV-2-102 is condensation curing type mould-making silicone rubber for craftwork. It is mix with 3~5% amount catalyst. Applied in making mould for pl (polyester resins), pu (polyurethane), exquisite pl, furniture decorations, lighting decoration, big statuary, candle, stationery &amp; duplication of cultural relic product. Hardness is 21&plusmn;1 Shore A.  

Condensation Curing Type Mould-Making Silicone Rubber

華文集團(香港)有限公司

&nbsp;Main applications include:
   DIN automobile wire   SAE automobile wire   UL insulation &amp; shealth   UL outdoor wire   Radiation cross-link compound   Molding PVC compound&nbsp;   LAN cable   Programmable switch board wire  

PVC Compound

深圳市盛嘉倫橡塑工業有限公司

型号系列：GP100/GP110/GP200/GP210/GP220
硬度范围：Shore 0A~60D

&nbsp;

热塑性弹性体（TPE/TPR）

Jiangsu Totus Technology Co Ltd

Direct Casting Resin -301C
&nbsp;
This is a very stable and reliable resin, which can be applied to all 3D Plus machines and can also be applied to machines for other manufacturers. It can be used by the engineer, designer and Jeweler to direct transfer the 3D design into great jewelry product.
&nbsp;
High definition, strength and precision
It can capture complicated details and has a strong adaptability, which is an ideal choice to embed gem, and it can also create challenging and unique model.
&nbsp;
Smooth surface quality
Before casting, the model printed by the machine has smooth surface, and perfect result can be realized with minimum polishing.

Direct Casting Resin - 301C

High Wax Contained Easy Casting Resin - ECR002
&nbsp;
The wax-contained casting resin can be placed in the furnace at low temperature and casted together with the wax. It burns very clean, ash-and residue-free, capturing clear and precise details. It also has a very smooth surface. Thick and letter-embedded models free can also be perfectly printed.
&nbsp;
High definition, strength and precision
Capturing complex details without worrying about thermal expansion, it also can create challenging and unique models.
&nbsp;
Smooth surface quality
Before casting, the printed model with a smooth surface can achieve perfection with minimal polishing.

High Wax Contained Easy Casting Resin

High-Strength Resin -305S
&nbsp;
The high-strength resin has higher hardness and strength, which also has very smooth surface. What you see is what you get. It can instantly transfer the designer&#39;s inspiration into an object that you can see, which can provide reference to the modification of design.
&nbsp;
Quick verification
It can capture complicated details, you don&#39;t need to worry that the feature is too small to print, which is an ideal choice for small holes and thin nails, and it can also create challenging and unique model.
&nbsp;
Perfect match
It does not need polishing, the model printed by the machine has smooth surface, and perfect result can be realized with minimum polishing.

High-Strength Resin - 305S

Direct Casting Resin -101W
&nbsp;
This is a really very easy casting resin. The resin has clean combustion, which does not have any ash or residual. It can capture clear and specific details, which also has very smooth surface, and it can be used by the engineer, designer and jeweller to direct transfer the 3D design into great jewelry product.
&nbsp;
High definition, strength and precis on!
It can capture complicated details, you don&#39;t need to worry about thermal expansion, which is an ideal choice to embed gem, and it can also create challenging and unique model. Great jewelry product.
&nbsp;
Smooth surface quality
Before casting, the model printed by the machine has smooth surface, and perfect result can be realized with minimum polishing.

Direct Casting Resin - 101W

東嶽集團有限公司

PTFE boasts excellent&nbsp;resistance to&nbsp;high temperature, high pressure, friction and aging.&nbsp;It is non-sticky and noncombustible.&nbsp;PTFE has been widely applied in aerospace, military, electronics, machinery, chemical industry and&nbsp;manufacturing fields.   Outstanding insulation.   Easy to apply.  

PTFE

泰嘉實業(香港)有限公司

 	 Color: Plain, White, Silicon Coating, Metalized 	 Can be used for: Packaging, Stamping Foil, Graphic Art, Electrical, Display, Industrial, Magnetic&amp;Recording media. 	 Various sizes  

PET Film

 	 Transparent plain BOPA film maintains good characteristic of polyamide 6 with puncture resistance delivering to be used in retort pouch, frozen food, printing and laminating application. 	 Color: Plain 	 Various sizes  

我的採購

確定要取消關注此供應商？

確定要取消關注此供應商？