漳州市東方智慧型儀器表有限公司

Featured here is a digital multimeter that combines five measurements in one unit. It comes with the ability to measure the voltage, current and resistance. This versatile multimeter is great for troubleshooting for a wide array of industrial or household devices.   Voltage: 400V.   Frequency: 10Hz.   Certification: CE, GS, CCC, UL.  

Digital Multimeter

The featured digital multimeter comes with voltage, current, ohm, diode and continuity testing function. It has a digital display on the side and is equipped with two probes in black and red. This pocket sized multimeter flaunts a high portability and is convenient to use. 	 Pocket size digital multimeter. 	 With voltage, current, ohm, diode and continuity testing function. 	 Digital display on the side. 	 Equipped with two probes in black and red. 	 Rectangular shaped case. 	 High portability. 	 Convenient to use.  

 This tester can measure grounding resistance and AC voltage up to 200V. 2mA current test signal permits grounding resistance tests without tripping current breakers in the circuit under test. It can be used in the grounding resistance measurements of power system, electrical device, lightning protection device, etc. It is easy to use and has a high precision.
SAFETY INFORMATION
This tester has been designed according to IEC-61010 concerning electronic measuring instruments with a measurement category (CAT III 200V). 

Multimeters

寧波嘉利光電科技有限公司

Applied in electronic medical beauty care jewellery 

 Magnifier Lamp

美特(中國)有限公司

 	 When connected through &lsquo;Bluetooth Integrated&rsquo; device transmit data to Smart phone / Tablet / PC using iOS APPS / Andriod APPS / PC software 	 Resistor measurement 	 Continuity 	 AC/DC current measurement 	 AC/DC voltage measurement 	 Anti-Burn Protect on full range 	 Backlight &amp; Low battery indication  

Wireless Connectivity Open Jaw AC/DC Clamp Meter

 	 When connected through External Bluetooth device transmit data to Smart phone / Tablet / PC using iOS APPS / Andriod APPS / PC sofware 	 True RMS 	 Count / Digit : 2000/3-1/2 	 Auto / Manual detection voltage 	 Diode check 	 Non-Contact AC Voltage Detector 	 Single Probe Test AC Voltage 	 Anti-Burn Protect on full range 	 Continuity 	 Capacitance 	 NCD 	 Low battery indication  

Wireless Connectivity Pocket Size Digital Multimeter 

 	 When connected through&lsquo;Bluetooth Integrated&#39; device transmit data to Smart phone / Tablet / PC using iOS APPS / Andriod APPS / PC software 	 CAT II, 1000V (AC/DC); CAT III, 600V (AC/DC) 	 True RMS 	 Count / Digit : 6000/3-3/4 	 Auto detection voltage 	 Diode check 	 Capacitance 	 Non-Contact AC Voltage Detector 	 Single Probe Test AC Voltage 	 Thermocouple available 	 Anti-Burn Protect on full range 	 Backlight &amp; Low battery indication  

Wireless Connectivity Digital Multimeter

- Non-trip RCD testing method
- Test lead nulling point
- Six insulation check levels (Plus correct output check)
- Five continuity check levels (Plus correct output check)
- Two loop impedance test points plus local loop
- Five checks covering 30mA and 100mA RCD&#39;s
- Checks RCD over current test
- Test leads for resistance and insulation checks
- Calibration certificate with measured values
- Tough drop-proof watertight case
- Operating voltage : 230V (Mains supply)

Professional Calibration Check Box

- Continuous tone for a good indication
- Warbling tone indicates a fall condition
- Advanced electronics allows clear indication even on noisy&nbsp;
&nbsp; &nbsp;circuits
- 3 colour LEDs show fault location
- Indicates goods and 17 fault conditions
- A built in self-test gives confidence of operation
- True Earth loop impedance test
- Simple loop results : LED colour GOOD, CHECK or URGENT
&nbsp; &nbsp;CHECK
- 30mA RCD operational check
- Tests for reversed Live / Neutral at DNO service cut out
- Incoming supply polarity test
- Simple true polarity test by touching on &#39;POLARITY CHECK&#39;
&nbsp; &nbsp;pad

Advanced Socket Tester

龍程實業(香港)有限公司

Our product lines have been certified by international standards. With accords to the latest EN 61010, EN 61326 standard have been certified by SGS and with TUV certificate.

Featured here is&nbsp;a high-quality handheld digital multimeter suitable for multiple testing purposes. Its high accuracy and easy operation make it an ideal choice for you. This reliable multimeter is also available in various models. 	 6000 counts LCD display 	 Auto range &amp; manual range 	 DC / AC voltage 	 DC / AC current 	 Resistance 	 Diode test 	 Audible continuity test 	 Capacitance 	 Frequency 	 Temperature 	 Duty cycle 	 Relative measurement 	 Back light 	 True RMS 	 Auto power off 	 Low battery indication 	 Overload protection  

Multimeter

Our product lines have been certified by international standards.With accords to the latest EN 61010, EN 61326 standard have been certified by SGS and with TUV certificate. 	 Smart digital multimeter 	 Auto-select and auto-range 	 DC/AC voltage 	 DC/AC current 	 Resistance 	 Diode test 	 Audible continuity test 	 Data hold 	 Max hold 	 Back light 	 Auto power off 	 Low battery indication 	 Overload protection 	 15A  

 Key Specifications/Special Features: 

- Contact ACV test : 70-250VAC&nbsp;
- Non-contact ACV test : from 100VAC (single wire)&nbsp;
- Continuity check, i.e. fuse, bulb and wiring etc.&nbsp;
- DC Voltage / Polarity check : 1.5V - 24VDC&nbsp;
- Proper connection check of electrical appliances&nbsp;
- Gound / Earthing check of electrical appliances&nbsp;
- Locate broken wire&nbsp;
- With vial for level measuring&nbsp;
- Wide viewing angle&nbsp;
- Super bright long lasting instant blinks LED&nbsp;
- Save energy more than 70% when normal operation&nbsp;
- With retractable driver blade for more safety when storage&nbsp;
- Battery powered :&nbsp;2 x 1.5V (L736 / LR41 / AG3)
- Dimension (LxWxD) mm : 138x20x20
- Worldwide patent pending
- Originated, designed and developed by MEET

&quot;FREE&quot; shipping cost arranged by &quot;First Come First Serve&quot;. Valid to 31 Mar 2018 for samples ordering only.

Digital Tester

 A MUST TROUBLE SHOOTING TOOLS FOR HOME BUILDING, RENOVATION AND CONSTRUCTION 

  Complete Testing Kit Set :   	 Transmitter 	 Receiver 	 Accessories : * Croc Clips&nbsp; * 13A Socet Adaptor x 2&nbsp; * E27 ES light Fitting Test Adaptor&nbsp; * 5m Extension Test Lead&nbsp; * Durable &amp; Portable tool box    Advance Features :  &nbsp;
 Transmitter :  	 Operate by 9V battery&nbsp; 	 8 levels transmit signal selection 	 Non-contact AC voltage detection &gt; 100V AC 	 Works on energized or de energized circuit 	 Transmit signal greater than 1Km 	 Works on signle pole application (0-2m) or double pole application (0-0.5m) 	 Anti-trip function when transmit between Live and Earth connection   Receiver :  	 Operate by 9V battery 	 Auto sensitivity adjust or manually &#39;REL&#39; adjust&nbsp; 	 Non-contact AC voltage detection &gt; 100V AC&nbsp; 	 With white LED torch / flash light 	 Audible with 7 levels signal strength indication 	 270 degree rotation with 6 positions selectable sensing arm   Trace :  	 Cable / Multi-core cable 	 Wire / Telephone cable 	 Coaxial cable 	 Shielded network cable 	 Armoured cable 	 Underground cable 	 Buried wire / cable 	 Wire inside PVC / metal conduit / duct / pipe 	 Metallic water pipe 	 Heating pipe 	 &nbsp;Buried gas pipe 	 Ground / Earth connection  


&nbsp;

Cable & Piper Tracer

  Kit Set include:   	 Wireless Connectivity Infrared Thermometer 	 Wireless Connectivity Clamp Meter 	 Wireless Connectivity Laser Distance Meter 30M 	 Advanced Socket Tester 	 Telescopic ACV Detector&nbsp; 	 All Weather Analogue Tester 	 External Module for Wireless Connectivity items 	 Thermo-couple for Wireless Connectivity Infrared Thermometer&nbsp; 	 Test Lead for Wireless Connectivity Clamp Meter  

Real Estate Kit Set

太平洋恆進實業有限公司

This electronic insect swatter with reliable performance is ideal for household use. The appliance is designed to kill flying insects like flies, mosquitoes, moths, bugs, wasps, gnats, etc. This electronic insect swatter comes with an ergonomic handle to guarantee a comfortable grip. 	 High quality. 	 Built-in Rechargeable battery  

Electronic Flying Insect Killer

菁盛企業有限公司

Available is the fiber optic tester and fusion splicing tool. They are constructed of quality materials to withstand long-term use. The tester is engineered to deliver accurate and reliable results.
 
  Easy-to-carry packaging box. 
  Other electrical utensils are available. 
 

Tester and Fusion Splicer

This electronic insect swatter with reliable performance is ideal for household use. The appliance is designed to kill flying insects like flies, mosquitoes, moths, bugs, wasps, gnats, etc. This electronic insect swatter comes with an ergonomic handle to guarantee a comfortable grip.   High quality.   Available in other designs.  

Electronic Insect Swatter

LISUN ELECTRONICS (SHANGHAI) CO., LTD

The LS9955/LS9956Automatic Safety Test System (electrical safety analyzer) combines the following functions: Withstand Voltage Test (AC / DC), Insulation Resistance Test (IR), Leakage Current Test (LLC), Grounding Resistance Test (GR) and Power Test (LS9956 includes Power Test, LS9955 does not include Power Test). The equipment is mainly used for lighting fixtures, household appliances and motor tools safety test on the production line or in the R&amp;D laboratory. Standard:IEC/EN 60335-1:2023/GB 4706.1-2024 “Household and similar electrical appliances – Safety – Part 1: General requirements”UL 60335:2022 “Standard for Safety of Household and Similar Appliances, Part 1: General Requirements”IEC 60598:2024/GB 7000-2023 “Luminaires – Part 1: General requirements and tests”IEC 60950:2020 “Information technology equipment Safety –Part 1: General requirements “IEC 62368-1:2023/GB 4943-2022 “Audio/video, information and communication technology equipment – Part 1: Safety requirements”IEC 60601-1 3.1:2012/ GB 9706.1-2020 “Medical Electrical Equipment – Part 1: General Requirements For Basic Safety And Essential Performance” Specification:• Remote control device and can control by software (Optional)• Display all setting parameters and testing results in the same big LCD screen• PASS/FAIL limit values can be set.If the object fails the test, there will be a light/sound alarm• Test mode is programmable; 50 groups settings are available, 8 test steps per group• Quick discharge. Support 50Hz and 60Hz frequency; Electric safety wall detecting feature• The LS9955 can test Withstand Voltage (AC/DC), Insulation Resistance (IR), Leakage Current (LLC) and Ground Resistance (GR)• The LS9956 can test Withstand Voltage (AC/DC), Insulation Resistance (IR), Leakage Current (LLC), Ground Resistance (GR) and Power Withstand Voltage Test (AC/DC)Insulation Resistance Test (IR)Voltage RangeAccuracyCurrent RangeIR RangeAccuracyVoltage Range100~4000V± (5%+3V)AC: 0.10~20.00mADC: 0.10~12.00mA1.00~2000MΩ5% + 0.5MΩDC100~1000VLeakage Current Test (LLC)Grounding Resistance Test (GR)LLC RangeAccuracyVoltage RangeGR RangeAccuracyOutput Current0.10~20mA± (0.3%+5uA)AC10.0~300.0V0~600mΩ± (5%+2mΩ)AC1.00~30.00APower TestVoltageCurrentPowerPFAccuracyTest Time10~300V0.010~20.00A1.0~6000.0W0.2~1.0Class 0.50~999.9sP.S. The LS9955/LS9956 of Leakage Current Test (LLC) needs to work with LISUNITEU-SP1KS or ITUS-SP1KS Isolation Transformer (The Output is 1.06times of the input). The LS9955/LS9956 of Leakage Current Test (LLC) and Power Test need to work with LISUNLSP-1KVARC orLSP-1KVAS AC Power Supply. 

Automatic Safety Test System

LSRF-3 Lamp start, Run-up time and Light Flickering Analyzer – Flicker Tester is equipped with Class A photo detector, so the sampling speed is up to 100kHz. It fully meets the requirement of BASIC,Energy Star V2.1,IEC TR 61547-1:2020 IEC-Pst, CA CEC, ASSIST,CIE TN006-2016 CIE SVM, IEEE Std 1789 standards, etc. It is professional for flicker test of LED lights and lamps, energy-saving lamps, etc. According to EU directives 1194/2012, 2009/125 / EC,SASO2902,COMMISSION DELEGATED REGULATION (EU) 2019/2015,COMMISSION REGULATION (EU) 2019/2020 and IEC60969 “Self-ballasted Lamps for General Lighting Services—Performance Requirements” and other requirements. The LSRF-3 can connects with PC via USB cable. The English version software can be run in Win7, Win8, Win10, Win11 (Microsoft certified driver) Standard:Energy Star V2.1 ” Lamps Program Requirements V2.1″IEC TR 61547-1:2020 “Equipment for general lighting purposes – EMC immunity requirements – Part 1: Objective light flickermeter and voltage fluctuation immunity test method “CIE TN006-2016 CIE SVM “Visual Aspects of Time-Modulated Lighting Systems – Definitions and Measurement Models”IEEE Std 1789 “IEEE Recommended Practices for Modulating Current in High-Brightness LEDs for Mitigating Health Risks to Viewers”IEC60969 “Self-ballasted Lamps for General Lighting Services—Performance Requirements” 1. Lamp Flicker test interface needs to work with LISUN Integrating Sphere, DC Power Source and Standard Light Source. It also can be added in LISUN LPCE-2 /LPCE-3 Integrating Sphere System or LSG-6000/LSG-1890B/LSG-1800A Goniophotometer system or LSG-6000CCD/LSG-1890BCCD/LSG-1800ACCD Goniospectroradiometer system, please click here to see the Lamp Flicker Test Report Sample: 2. Lamp Start and Run-up Test: Please click here to see the Lamp Start and Run-up Test Report Sample. The LSRF-3 needs to work with LISUN’s LSP-500VARC AC Power Source (With Trigger Function) or LSP-500VARC-Pst (IEC-Pst AC Power Source) to test the Start and Run-up time of lamps which is according to clause 11.4 Start Time Test Method &amp; clause 11.5 Run-Up Time Test Method in the US Standards of Energy Star V2.1,and SASO2902 Table 13: 3. According to IEC TR 61547-1:2020, the LSRF-3 can do the Light Pst V measurement on AC Stable as below Figure 1a , and also can do the Light Pst LM(I) measurement on AC Fluctuation as below Figure 1b. Note: The Light Pst LM(I) measurements need to work with LISUN’s LSP-500VARC-Pst (IEC-Pst AC Power Source) 

Lamp Start, Run-up Time and Flicker Test System

The ZRS-3H Glow-wire Test Apparatus is used to test the flammability of plastic sheets or other insulating materials. The specimen is exposed to a high temperature glow wire (nickel/chrome wire) through a standard test procedure. It is used to identify whether the insulating material does not reach a certain temperature or ignite to prevent fire hazards around it. What is glow wire test?The Glow wire tester ZRS-3H/ZRS-3HS is mainly used to test the ignition performance, ignition temperature, flammability and flammability index of lighting equipment, electronic products and household appliances. The equipment adopts high-temperature sprayed steel structure and imported instrument display, which is easy to operate and has stable test performance. This equipment is mainly used for flame retardancy testing by QC departments and related enterprises. Standard:IEC 60695-2-1:2021(VDE0471:2019) “Fire hazard testing – Part 2: Test methods – Section 1/sheet 1: Glow-wire end-product test and guidance”IEC 60695-2-11:2021(GB/T5169.10-2006)”Fire hazard testing – Part 2-11: Glowing/hot-wire based test methods – Glow-wire flammability test method for end products (GWEPT)”IEC60695-2-10:2000 “Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure”IEC 60695-2-12:2021 “Fire hazard testing – Part 2-12: Glowing/hot-wire based test methods – Glow-wire flammability index (GWFI) test method for materials”IEC 60695-2-13:2000 “Fire hazard testing – Part 2-13: Glowing/hot-wire based test methods – Glow-wire ignition temperature (GWIT) test method for materials”IEC 60335:2023 “Household and similar electrical appliances – Safety – Part 1: General requirements”UL 746A:2021 “Standard for Polymeric Materials – Short Term Property Evaluations”IEC 829 Specification:• Heating temperature: adjustable continuously within the range of 25~1100°C, the accuracy of temperature is 3°C, the resolution of temperature is ±1°C• Glow-wire time: 0.1-999.9s，±0.1s(time range is adjustable)• Ignition time: 0.1-999.9s (auto record, manual pause)• Flame-out time: 0.1-999.9s (auto record, manual pause)• Glow wire pressure on test specimen: 0.95±0.1N. Limiting pressure depth is 7mm.• Glow wire: φ4 nickel (80％) and chromium (20％). Made in specific dimensions.• Thermocouple: φ1 armored nickel-chromium/nickel-aluminum wire, K Type.• Automatic departure: While reaching specified glowing time, test specimen will depart from glow wire automatically. 

Glow-wire Test Apparatus

LS2090 LED Power Driver Test Instrument is the comprehensive test instrument for LED driver power which is according toGB/T 24825-2009 andIEC 62384:2006. It can measure the following parameters: input (AC&amp;DC), output (AC&amp;DC), output start (DC), harmonic and displacement factor (DF). The LS2090 usually works withLISUN LSP-500VARC pure sine AC Power Source andLISUN M9822 DC Electronic Load. The LSP 500VARC provides constant adjustable standard power for the driver under test, and the M9822 is used to simulate the LED source. The software can run on Win7, Win8, Win10, Win11. Standard:IEC 62384:2006/GB/T 24825-2009 “DC or AC supplied electronic control gear for LED modules – Performance requirements” Specification:1. Input Characteristics Test (AC)• Measures the input voltage, current, power, power factor, power frequency• The fundamental frequency scope of the current and voltage: 45Hz~65Hz;Narrowband range: 45Hz~5kHz; Broadband range: 45Hz~1MHz.• Voltage range: 3~300 V (CF=1.67); Current range: 5mA ~ 2.7A (CF=3); Power range: 0.015~800W; Power factor range: 0.000~1.000. 2. Input Characteristics Test (DC)• Measures voltage, current, power.•Voltage range: 3~500V; Current range: 5mA~8A; Power range: 0.015~4000W 3. Output Characteristics Test (AC)• Measures lamp voltage, lamp current, lamp power.•Lamp voltage range: 3~300V (CF=3); Lamp current range: 5mA~2.7A(CF=3); Lamp power range: 0.015~800W 4. Output Characteristics Test (DC)• Measures output lamp voltage, lamp current, lamp power, ripple wave current.•Voltage range: 3~500V; Current range: 5mA~8A; Power range: 0.015~4KW; Ripple wave current range: 5mA~2.5A. 5. Output Start Characteristics Test (DC)• Changing curve and data of the lamp voltage and lamp current within 0~2 seconds.•Lamp voltage range: 3~500V;Lamp current range: 5mA~8A 6. Harmonic TestingTotal harmonic and the harmonic component of 0~50 times, wave ratio, initial phase angle, peak phase angle and the phase Angle. 7. Displacement Factor (DF) TestingThe LS2090 is an update version for WT2080, the LS2090 has the Displacement Factor (DF) Testing function. P.S. The LS2090-IEC with additional software (need to add extra cost on LS2090) can fully meetEN/IEC61000-3-2:2019. Please click here to see theLS2090-IEC additional Test Report Sample 

LED Power Driver Tester

Ring wave test generator is designed according to theIEC61000-4-12, EN61000-4-12,ANSI-C62-41 andGB/T17626.12. This instrument is used for the simulative electrical network, the power supply of the reactive load and the control line switch, as well as sensing the ring wave of the low voltage cables terminal equipment caused by the disconnection of the power circuit, fault and insulation breakdown or lightning stroke. The RWG61000-12 series products have LCD display in both English and Chinese. Standard:IEC61000-4-12/EN61000-4-12/GB/T17626.12 “Electromagnetic compatibility (EMC) – Part 4-12: Testing and measuring – Ring waves immunity test”ANSI-C62-41 “IEEE Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits” Specification: Product ModelRWG61000-12RWG61000-12TRWG61000-12ARWG61000-12ATOutput Voltage0~4KV0~6KVVoltage/Current WaveOpen circuit voltage wave: frontier: 0.5μs±20%. Short circuit current wave: frontier: ≤1μs. Oscillation frequency: 100kHz±10%PolarityPositive, Negative or Automatic switchingPhase ShiftAsynchronous, Synchronization 0°~360° or Specific AngleOutput Impedance12Ω, 30ΩCoupling/Decoupling Network (CDN)Includes a 16A single phaseIncludes a 20A 3phases/5wiresIncludes a 16A single phaseIncludes a 20A 3phases/5wiresWorking PowerAC220V (Option 110V) ±10%, 50/60HzDimension (DxWxH)44x45x35cm44x45x20cm 44x45x35cm (CDN)44x45x30cm 44x45x20cm (CDN)44x45x30cm 44x45x35cm (CDN)Gross WeightAbout 28kgAbout 46kgAbout 45kgAbout 48kg

Ring Wave Generator

Impulse Test Generator SUG-CCITT-A (Circuit 1, 10/700μS, according to Figure D.1/ Table D.1 in IEC 62368-1:2018 Annex D, Figure K.1/ Tabke K.1 in IEC 60065:2014 Annex K , and Figure N.1/ Table N.1 in IEC 60950-1:2005 Annex N). Standard:IEC 62368-1:2018“Audio/video, information and communication technology equipment – Part 1: Safety requirements”IEC 60065:2014 “Audio, video and similar electronic apparatus – Safety requirements”IEC 60950-1:2005 “Information technology equipment – Safety – Part 1: General requirements” Circuit reference 1 of Table D.1 generates 10/700 μs impulses (10 μs virtual front time, 700 μs virtual time to half value) as specified in ITU-T Recommendation K.44 to simulate lightning interference in the TELECOMMUNICATION NETWORK. Note:1. If you also need Circuit 2, 1.2/50μS, according to Figure D.1/ Table D.1 in IEC 62368-1:2018 Annex D (Or Figure K.1/ Tabke K.1 in IEC 60065:2014 Annex K , and Figure N.1/ Table N.1 in IEC 60950-1:2005 Annex N), it will beSUG255XXimuplse voltage generator2. If you also need Circuit 3, according to Figure D.2/ Table D.1 in IEC 62368-1:2018 Annex D (Or Figure N.2/Table N.1 in IEC 60950-1:2005 Annex N), it will beSUG255CXimuplse voltage generator  

Impulse Test Generator

Impulse Voltage Generators | Impulse Generators | Impulse Withstand Voltage Tester |High VoltageSurge Generator is according to IEC255-5,GB-14711 , GB/T-14598.3, IS-13252-1, IEC60060,IEC60065,GBT17215.301 andGBT17215.322. The insulation performance test is suitable for all kinds of electrical and electronic products (such as energy meter, household appliances, low voltage electrical appliances and small power motors). Standard:IEC255-5 “Relays – Insulation tests”IS-13252-1 “Information technology equipment — Safety Part 1 General requirements”IEC60060 “IEC 60060-1-2010 High-voltage test techniques – Part 1 General definitions and test requirements”IEC60065 ” Audio, video and similar electronic apparatus – Safety-requirements”IEC 60255-5:2000/GB/T-14598.3″Electrical relays – Part 25: Electromagnetic emission tests for measuring relays and protection equipment”GB/T-3048.8 “Test methods for determining electrical properties of electric cables and wires.A.C. voltage tests” LISUN ModelSUG255LXSUG255MXSUG255PXSUG255PX-20KVSUG255PX-25KVSUG255PX-30KVRange of Output Voltage0～12kV0～20kV0～25kV0～30kVImpedance of Generator12Ω and 500Ω38Ω and 500Ω2Ω and 500ΩVoltage Output Waveform1.2 / 50μsPolarity of Output VoltagePositive and NegativeOperation ModeManually and AutomaticTest Repetition1～9999Interval Time3～9999s

我的採購

確定要取消關注此供應商？

確定要取消關注此供應商？