TIOSL Technology (Shenzhen) Co Ltd

LED PIR Fixture Mounted Smart ControllerLED PIR Fixture Mounted Smart Controller   itemvalueModel NumberTL-CS-BPRN-MN-12-02 typeAMBIENT LIGHT SENSORPlace of OriginChinaOriginGuangdongBrand NameTioslUsageLightingSensing modeInfrared sensorInput12vBluetooth protocolBluetooth mesh controlWaterproof levelip65DimmingSingle-channelReflectorAluminiumConnectorBuilt-in magneticTo better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.Company Information 1. who are we?We are based in Guangdong, China, start from 2019,sell to North America(78.00%),Western Europe(15.00%),Eastern Asia(4.00%),Northern Europe(3.00%). There are total about 11-50 people in our office.2. how can we guarantee quality?Always a pre-production sample before mass production;Always final Inspection before shipment;3.what can you buy from us?magnetic strip retrofit kits,led smart troffer,led smart linear high bay,led smart ufo,led tube4. why should you buy from us not from other suppliers?TIOSL is focused on led smart lighting include smart lighting systems in BLE and smart lighting products like smart tunable white troffer, linear high bay, magnetic strip kits, ufo, panel light etc. All the products and software (App) are in-house design.5. what services can we provide?Accepted Delivery Terms: FOB,EXW;Accepted Payment Currency:USD;Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union;Language Spoken:English,Chinese,Japanese,German

(Clone) Tiosl Brand BLE Mesh Control Round Bluetooth Smart Module With PIR & Daylight 2 in 1 Sensor for Indoor Fixtures

Kaoyi Group SPA

Kaoyi spares no efforts in the advancement of technology, keeping up with the ever-changing user habits in order to always present the best at the right time. Technical support in every field is required for products to turn smart. Every stage is a necessary need for the smooth coordination from software, firmware, to the cloud. The special power circuit makes our Bluetooth and ZigBee dimmers workable with non-neutral wiring system, without requiring the N line for power supply. The greatest value proposition of our smart series is the modularized system when we plan the circuit embedded, getting our products to be prepared for any challenges with the IoT trend. Users can simply provide any wireless modules in spite of BLE, Wi-Fi, ZigBee, Z-wave or Tuya. We are capable of assuring the module to be compatible with our circuit without affecting the performance. By collaborating our self-developed APP and Smart Assistants from major brands, the most optimized and cozy experience is suggested for smarter living.  

Smart Series 

深圳市特普生科技有限公司

Wireless Food Thermometer  Receiving Module TB01

Our work lights are multifunctional to assist you in dealing with every critical situation. The latest model KIT-8840WS-BHT is remotely controllable with BLE module and Kaoyi APP, with an indicator bar to monitor status. It is geared with a one-hand controllable spot light, with a temperature sensor function to measure from -20C up to 200C. The anti-oil coating and IP66 rating allows our work light to work for for any purposes, regardless of living, working, or camping. The 150° foldable body allows a broader beam angle of usage with our popular model KIT-9502PS-00. This work light is designed with one major light source on the side and one spot light at the very front. The magnet design at the bottom of the light enables worker to free their hands for better application on work. It is also designed with a 360° swivel hook to assist usage and for users to carry easily. As the structure was designed with IP65, products are even more dependable for long run. Certified adapters and rechargeable battery are used for all work lights and full product inspection in between every single station ensure user safety. A thorough range of testings are conducted to make sure our work lights are fully functional under tough environment.  

Work Light 

Karin Technology Holdings Ltd

BT V4.0 / M0 MCU PCB Antenna QDIQ Support

Bluetooth Low Energy 4.0 Module (Nordic)

Raytac Corp

Raytac&rsquo;s MDBT42 is a BT5 and BT4.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52832 SoC solution, which incorporates: GPIO, SPI, UART, I2C, I2S, PWM and ADC interfaces for connecting peripherals and sensors.

About the module: 	 1. Dual Transmission mode of BLE &amp; 2.4Ghz RF upon customer preference. 	 2. Compact size with (L) 13.8 x (W) 8.8 x (H) 1.9 mm. 	 3. Low power requirements, ultra-low peak, average and idle mode power consumption. 	 4. Be compatible with a large installed base of mobile phones, tablets and computers. 	 5. Fully coverage of BLE software stack 	 6. BLE &amp; RF transmission switching helps products fit all operation system and most hardware. 	 7. BT5 &amp; BT4.2 Bluetooth Specificaiton Certified 	 8. FCC/IC/CE/Telec/KC/SRRC safety regulation certification granted.FeaturesMulti-protocol 2.4GHz radio 	 32-bit ARM Cortex &ndash; M4F processor 	 512KB flash programmed memory and 64KB RAM 	 Software stacks available as downloads 	 Application development independent from protocol stack 	 On-air compatible with nRF51, nRF24AP and nRF24L series 	 Programmable output power from +4dBm to -20dBm 	 RSSI 	 RAM mapped FIFOs using EasyDMA 	 Dynamic on-air payload length up to 256 bytes 	 Flexible and configurable 32 pin GPIO 	 Programmable peripheral interface - PPI 	 Simple ON / OFF global power mode 	 Full set of digital interface all with Easy DMA including: 	 3 x Hardware SPI master ; 3 x Hardware SPI slave 	 2 x two-wire master ; 2 x two-wire slave 	 1 x UART (CTS / RTS) 	 PDM for digital microphone 	 I2S for audio 	 Quadrature demodulator 	 12-bit / 200KSPS ADC 	 128-bit AES ECB / CCM / AAR co-processor 	 Lowe cost external crystal 32MHz &plusmn; 40ppm for Bluetooth ; &plusmn; 50ppm for ANT Plus 	 Lowe power 32MHz crystal and RC oscillators 	 Wide supply voltage range 1.7V to 3.6V 	 On-chip DC/DC buck converter 	 Individual power management for all peripherals 	 Timer counter 	 5 x 32-bit 	 3 x 24-bit RTC 	 NFC-A tag interface for OOB pairing  

&nbsp;

Nordic nRF52832 BLE Module

 	 MDBT40-P is a BT4.0 &amp; BT4.1 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF581xxx SoC solution incorporates: GPIO, UART, I2C and ADC interfaces for connecting peripherals and sensors. 	 The Merit of MDBT40-P Module 	 Dual Transmission Mode of BLE &amp; RF 2.4G upon customer preference. 	 Long Working Distance (Over 80M in open space) 	 Declaration ID already included hardware and all Nordic applied profiles. 	 31 GPIO 	 FCC (USA)&amp;IC(Canada)&amp;CE(EU)&amp;Telec(Japan)&amp;KC(Korea)&amp;SRRC(China) certificate granted. 	 Fully coverage of BLE software stack including: 	 Proximity Profile; Heart Rate Profile; Health Thermometer Profile; 	 Blood Pressure Profile; Running Speed &amp; Cadence Profile; 	 HID Over GATT Profile; Alert Notification Profile; Glucose Profile; 	 Cycling Speed &amp; Cadence Profile 	 Fully support customers to suit the needs of any application!  

Nordic nRF51822 BLE Module

Wavetek Technology Co., Limited

Wavetek has developed a module which supports Bluetooth Low Energy (BLE) standards. The number of BLE compliant appliances, including smartphones and PCs, has been increasing in the market. Hosiden BLE module is a small sized, all purpose module which can be installed in peripherals, communicating with these products with low power consumption. As this product has already acquired Bluetooth certification, it is easy for appliances in which the module is installed to get the certification and contributes to the reduction of product development costs.
 
  Equipped with SoC type BLE chip Nordic nRF51822. 
  Can use a maximum of 23 GPIOs. 
  Products with simple circuitry structures without using additional microcomputers can be designed. 
 

Bluetooth UART Module

Raytac&rsquo;s MDBT42 is a BT5 and BT4.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52832 SoC solution, which incorporates: GPIO, SPI, UART, I2C, I2S, PWM and ADC interfaces for connecting peripherals and sensors.

About the module: 	 1. Dual Transmission mode of BLE &amp; 2.4Ghz RF upon customer preference. 	 2. Compact size with (L) 13.8 x (W) 8.8 x (H) 1.9 mm. 	 3. Low power requirements, ultra-low peak, average and idle mode power consumption. 	 4. Be compatible with a large installed base of mobile phones, tablets and computers. 	 5. Fully coverage of BLE software stack 	 6. BLE &amp; RF transmission switching helps products fit all operation system and most hardware. 	 7. BT5 &amp; BT4.2 Bluetooth Specificaiton Certified 	 8. FCC/IC/CE/Telec/KC/SRRC safety regulation certification granted.  Features 	 Multi-protocol 2.4GHz radio 	 32-bit ARM Cortex &ndash; M4F processor 	 512KB flash programmed memory and 64KB RAM 	 Software stacks available as downloads 	 Application development independent from protocol stack 	 On-air compatible with nRF51, nRF24AP and nRF24L series 	 Programmable output power from +4dBm to -20dBm 	 RSSI 	 RAM mapped FIFOs using EasyDMA 	 Dynamic on-air payload length up to 256 bytes 	 Flexible and configurable 32 pin GPIO 	 Programmable peripheral interface - PPI 	 Simple ON / OFF global power mode 	 Full set of digital interface all with Easy DMA including: 	 3 x Hardware SPI master ; 3 x Hardware SPI slave 	 2 x two-wire master ; 2 x two-wire slave 	 1 x UART (CTS / RTS) 	 PDM for digital microphone 	 I2S for audio 	 Quadrature demodulator 	 12-bit / 200KSPS ADC 	 128-bit AES ECB / CCM / AAR co-processor 	 Lowe cost external crystal 32MHz &plusmn; 40ppm for Bluetooth ; &plusmn; 50ppm for ANT Plus 	 Lowe power 32MHz crystal and RC oscillators 	 Wide supply voltage range 1.7V to 3.6V 	 On-chip DC/DC buck converter 	 Individual power management for all peripherals 	 Timer counter 	 5 x 32-bit 	 3 x 24-bit RTC 	 NFC-A tag interface for OOB pairing  

Raytac&rsquo;s MDBT42Q-512K is a BT5 and BT4.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52832 SoC solution, which incorporates: GPIO, SPI, UART, I2C, I2S, PWM and ADC interfaces for connecting peripherals and sensors.

About the module: 	 1. Dual Transmission mode of BLE &amp; 2.4Ghz RF upon customer preference. 	 2. Compact size with (L) 16 x (W) 10 x (H) 2.2 mm. 	 3. Low power requirements, ultra-low peak, average and idle mode power consumption. 	 4. Be compatible with a large installed base of mobile phones, tablets and computers. 	 5. Fully coverage of BLE software stack 	 6. BLE &amp; RF transmission switching helps products fit all operation system and most hardware. 	 7. BT5 &amp; BT4.2 Bluetooth Specificaiton Certified 	 8. FCC/IC/CE/Telec/KC/SRRC safety regulation certification granted.FeaturesMulti-protocol 2.4GHz radio 	 32-bit ARM Cortex &ndash; M4F processor 	 512KB flash programmed memory and 64KB RAM 	 Software stacks available as downloads 	 Application development independent from protocol stack 	 On-air compatible with nRF51, nRF24AP and nRF24L series 	 Programmable output power from +4dBm to -20dBm 	 RSSI 	 RAM mapped FIFOs using EasyDMA 	 Dynamic on-air payload length up to 256 bytes 	 Flexible and configurable 32 pin GPIO 	 Programmable peripheral interface - PPI 	 Simple ON / OFF global power mode 	 Full set of digital interface all with Easy DMA including: 	 3 x Hardware SPI master ; 3 x Hardware SPI slave 	 2 x two-wire master ; 2 x two-wire slave 	 1 x UART (CTS / RTS) 	 PDM for digital microphone 	 I2S for audio 	 Quadrature demodulator 	 12-bit / 200KSPS ADC 	 128-bit AES ECB / CCM / AAR co-processor 	 Lowe cost external crystal 32MHz &plusmn; 40ppm for Bluetooth ; &plusmn; 50ppm for ANT Plus 	 Lowe power 32MHz crystal and RC oscillators 	 Wide supply voltage range 1.7V to 3.6V 	 On-chip DC/DC buck converter 	 Individual power management for all peripherals 	 Timer counter 	 5 x 32-bit 	 3 x 24-bit RTC 	 NFC-A tag interface for OOB pairing  

Nordic nRF5832 BLE Module

Raytac&rsquo;s MDBT42Q-P512K is a BT5 and BT4.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52832 SoC solution, which incorporates: GPIO, SPI, UART, I2C, I2S, PWM and ADC interfaces for connecting peripherals and sensors.
About the module: 	 1. Dual Transmission mode of BLE &amp; 2.4Ghz RF upon customer preference. 	 2. Compact size with (L) 16 x (W) 10 x (H) 2.2 mm. 	 3. Low power requirements, ultra-low peak, average and idle mode power consumption. 	 4. Be compatible with a large installed base of mobile phones, tablets and computers. 	 5. Fully coverage of BLE software stack 	 6. BLE &amp; RF transmission switching helps products fit all operation system and most hardware. 	 7. BT5 &amp; BT4.2 Bluetooth Specificaiton Certified 	 8. FCC/IC/CE/Telec/KC/SRRC safety regulation certification granted.FeaturesMulti-protocol 2.4GHz radio 	 32-bit ARM Cortex &ndash; M4F processor 	 512KB flash programmed memory and 64KB RAM 	 Software stacks available as downloads 	 Application development independent from protocol stack 	 On-air compatible with nRF51, nRF24AP and nRF24L series 	 Programmable output power from +4dBm to -20dBm 	 RSSI 	 RAM mapped FIFOs using EasyDMA 	 Dynamic on-air payload length up to 256 bytes 	 Flexible and configurable 32 pin GPIO 	 Programmable peripheral interface - PPI 	 Simple ON / OFF global power mode 	 Full set of digital interface all with Easy DMA including: 	 3 x Hardware SPI master ; 3 x Hardware SPI slave 	 2 x two-wire master ; 2 x two-wire slave 	 1 x UART (CTS / RTS) 	 PDM for digital microphone 	 I2S for audio 	 Quadrature demodulator 	 12-bit / 200KSPS ADC 	 128-bit AES ECB / CCM / AAR co-processor 	 Lowe cost external crystal 32MHz &plusmn; 40ppm for Bluetooth ; &plusmn; 50ppm for ANT Plus 	 Lowe power 32MHz crystal and RC oscillators 	 Wide supply voltage range 1.7V to 3.6V 	 On-chip DC/DC buck converter 	 Individual power management for all peripherals 	 Timer counter 	 5 x 32-bit 	 3 x 24-bit RTC 	 NFC-A tag interface for OOB pairing  
&nbsp;

Raytac&rsquo;s MDBT42V and MDBT42V-P is a BT5 and BT4.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52832 SoC solution, which incorporates: GPIO, SPI, UART, I2C, I2S, PWM and ADC interfaces for connecting peripherals and sensors.

About the module:
1. Dual Transmission mode of BLE &amp; 2.4Ghz RF upon customer preference.
2. Compact size with (L) 8.6 x (W) 6.4 x (H) 1.5 mm.
3. Low power requirements, ultra-low peak, average and idle mode power consumption.
4. Be compatible with a large installed base of mobile phones, tablets and computers.
5. Fully coverage of BLE software stack
6. BLE &amp; RF transmission switching helps products fit all operation system and most hardware.
7. BT5 &amp; BT4.2 Bluetooth Specificaiton Certified
8. FCC/IC/CE/Telec/SRRC safety regulation certification granted.

Features 	 Multi-protocol 2.4GHz radio 	 32-bit ARM Cortex &ndash; M4F processor 	 512KB flash programmed memory and 64KB RAM 	 Software stacks available as downloads 	 Application development independent from protocol stack 	 On-air compatible with nRF51, nRF24AP and nRF24L series 	 Programmable output power from +4dBm to -20dBm 	 RSSI 	 RAM mapped FIFOs using EasyDMA 	 Dynamic on-air payload length up to 256 bytes 	 Flexible and configurable 20 pin GPIO 	 Programmable peripheral interface - PPI 	 Simple ON / OFF global power mode 	 Full set of digital interface all with Easy DMA including: 	 3 x Hardware SPI master ; 3 x Hardware SPI slave 	 2 x two-wire master ; 2 x two-wire slave 	 1 x UART (CTS / RTS) 	 PDM for digital microphone 	 I2S for audio 	 Quadrature demodulator 	 12-bit / 200KSPS ADC 	 128-bit AES ECB / CCM / AAR co-processor 	 Lowe cost external crystal 32MHz &plusmn; 40ppm for Bluetooth ; &plusmn; 50ppm for ANT lus 	 Lowe power 32MHz crystal and RC oscillators 	 Wide supply voltage range 1.7V to 3.6V 	 On-chip DC/DC buck converter 	 Individual power management for all peripherals 	 Timer counter 	 5 x 32-bit 	 3 x 24-bit RTC 	 NFC-A tag interface for OOB pairing  
&nbsp;

Well Linkage Co., Ltd.

BT0001

雷鬆科技股份有限公司

 	 Main Chip: MICROCHIP IS1870SF 	 Bluetooth&reg; Smart 4.2 	 BLE compliant UART/ I2C/ SPI interface supported 	 With the chip Antenna  

BLE Module

 	 M.2 802.11 ac/a/b/g/n 	 Bluetooth 2.0/3.0/4.0 BLE module  

PW0001

 	 mini PCIE 802.11 ac/a/b/g/n&nbsp; 	 Bluetooth 2.0/3.0/4.0 BLE module  

PW0001A

JalorCity International Limited

Locating technology: GPS, GSM/AGPS, Wifi Wristband: Changeable Water resistant: IP65 Communication module: GSM 850/900/1800/1900, GPRS, Bluetooth 4.0 BLE Battery: 300mAh Screen: No display App Support: Android 2.2 and later, IOS 5 and later Standby time: up to 4 days Google Map and built-in Sim card 10 seconds auto recording One button SOS Bluetooth accompanying mode Safe zones setting Package included: Manual, Charging cable, AC adaptor

Smart Tracker for Kid 

DME Micro

 	 Bluetooth BLE v4.2 technology support iPv6 internet 7W RGB &amp; warm white LED module APP for iOS &amp; Android best for smart home lighting  

LED Bulb

AREA Energy, Inc.

&nbsp; Specification: 
1. Bluetooth: 4.0
2. Wi-Fi: IEEE802.11 b/g/n
3. Power Source: 5VDC, max 500mA, USB type
4. Temperature Range: 0˚C to 40˚C
5. Humidity Range: 10%~95% relative humidity (RH)
6. Size: 50mm x 50mm x13mm

 Applications:  
A AW-2000&nbsp;BLE Gateway includes Wi-Fi and Bluetooth modules together. It can link directly through the Wi-Fi setting with any vendor&#39;s Wireless Broadband Router. Once the device is successfully linked, the maximum indoor Wi-Fi wireless transmission distance is up to 20 meters. Besides, it can be a gateway that connects with cloud sensors, cloud infrared controller, cloud BLE outlet and cloud BLE strip via Bluetooth. The indoor Bluetooth wireless transmission distance range might depend on indoor environment.



&nbsp;

BLE Gateway

Hongkong Enter Trade Technology Co., Limited

It is a headband device that monitors brainwaves and heart rate while meditate, providing real-time feedback to measure and improve your meditation.

Feature: 	 BLE 4.1 Bluetooth connector 	 30 hours battery life 	 Material: copper plated (EEG acquisition module), Aluminium 	 Master meditation by brainwave &amp; heart-rate bio-sensing technology. 	 Regulate meditation performance by Visualized Rich Data. 	 Scientifically validated abundant content supported by Mobio Interactive Inc.  

Meditation Headband

 Specification: 
1. Voltage: 100VAC ~ 240VAC
2. Rating current: 110V/15A, 220V/10A
3. Power meter function: Voltage, Current, Real Power
4. Wi-Fi: IEEE802.11 b/g/n
5. Bluetooth: 4.0
6. Size: 100mm x 65mm x 65mm
7. Operation:
&nbsp; &nbsp; Temperature: 0˚C to 40˚C
&nbsp; &nbsp; Humidity: 10%~95% relative humidity (RH)
 Applications:  
A AW-2111BT Cloud Wi-Fi BLE Outlet includes Wi-Fi and Bluetooth modules together. It can link directly through the Wi-Fi setting with any vendor&#39;s Wireless Broadband Router. Once the device is successfully linked, the maximum indoor Wi-Fi wireless transmission distance is up to 20 meters. And, the AW-2111BT has functions such as remote switch control, log analysis of power consumption, etc. Besides, it can be a gateway that connects with cloud sensors, cloud infrared controller, cloud BLE outlet and cloud BLE strip via Bluetooth. The maximum indoor Bluetooth wireless transmission distance is up to 20 meters, and transmission distance range might depend on indoor environment.

&nbsp;

Cloud Wi-Fi BLE Outlet

Shenzhen Horision Technology Co., Ltd.

High-quality M3 smart bracelet with blood oxygen heart rate monitoring smart bracelet USB charging 	 Smart bracelet, sports bracelet, smart wear 	 Phone system Android 4.4 and above, IOS 8.0 and above, Bluetooth 4.0 support 	 Bluetooth version BLE 4.0 	 Bluetooth chip Mcuble ST17H25 	 Heart rate module HRS3300 	 Battery capacity 110mAh 	 Standby time about 15 days 	 Working time about 5-7 days 	 Motor vibration remind 	 Charging interface USB plug 	 Waterproof level IPX7 	 Sensor gravitational acceleration sensor  

Smart Bracelet with Blood Oxygen Heart Rate Monitoring

Muherz Limited Taiwan Branch (B.V.I.)

 	 Weight: 1.3 Kg (Laser Module only 150 gram) 	 Laser Source: 1600 mW OSRAM 450 nm bluelaser, lifetime estimation 10000 hours 	 Laser Output: 100 level adjustable 	 Finishing: Anodized aluminum 	 Color Option: Red, black and gold 	 Screw Mount: 1/4&quot;-20 UNC for standardtripods 	 I/O: Micro SD card (FAT32) 	 Supported File Format: G-Code and bmp 	 App Connection: BLE (Bluetooth Low Energy) 	 App OS: IOS 10+ / Android 4.4+ 	 Laser Source Power Requirement: Micro USB DC 5V, 2A&nbsp; Power bank (5V, 2A) supported, but not included 	 Power Input: AC 100-240V, 50-60Hz 	 Operating Temperature Range: 5&nbsp;℃&nbsp;to 40&nbsp;℃ 	 Operating Humidity Range: 5 % to 80 %(non-condensing) 	 Certifications: IEC 60825-1 (Laser Class1), CE, FCC, and FDA CDRH registered. IEC 60825-1 (Laser Class 4) if the laser module works without the shield.  

我的採購

確定要取消關注此供應商？

確定要取消關注此供應商？