廣州市奧迪詩音響科技有限公司

Car Amplifier

This is a car amplifier with a 3,000-watt power design. It comes with an extra-heavy heat sink for better heat dissipation. This highlighted car amplifier is compatible with different car brands.
 
  1-channel class D power amplifier class D technology remote subwoofer level control. 
  Military spec audiophile grade components. 
  Variable low pass and high pass crossover 1 ohm stable circuits. 
  Thermal, short-circuit, overloading and over-voltage protection. 
 

顯和有限公司

Building Construction Stand-up Collar Reflective Vest includes the following features : 4 x Patch pockets with snap button closure, and a transparent PVC bag outside the left chest patch pocket4 x High-brightness reflective scopes which have high reflective intensity, in line with European and American standardsThree-dimensional pockets can amplify itemsFront closure with resin zipper, smooth pulling and durable wearThis protective clothing shines and catches other's attention under dark and nightSuitable for safety, vehicle and emergency purposesMade of waterproof Oxford fabric, breathable and wear-resistant, simple and atmosphericAvailable in various colorsCustomized logo printing on reflective strap is availableMaterial : Waterproof Oxford fabricSize closed : M (68 x 56 cm)L (70 x 59 cm)XL (72 x 62 cm)

Building Construction Stand-up Collar Reflective Vest

Class D Car Amplifier

Conquer Industry Co., Limited

*Bluetooth wireless speaker supports for use with iPhone, iPad, Samsung, Android device and other Bluetooth enabled devices.  *Powerful speaker with built-in amplifier, provide crystal and clear sound performance.  * Moisture the dry air at home,office or vehicle in minutes with this Mist cool USB Humidifier  

 CQL2053

 CQL2106

  CQL2119

CQL1793

Shenzhen Moshangyin Electronics Technology Co., Ltd.

Upgrade Your Car Audio with E46.4A DSP Amplifier! ✅ 4CH High-Level Input + Optical/USB/BT 5.1：Seamless connectivity for factory &amp; aftermarket systems! ✅ CLASS AB Amplifier, Dual Impedance Power：25W×4@4Ω / 50W×4@2Ω, delivers deep bass without distortion. ✅ CIRRUS LOGIC 3-Core DSP Chip：24Bit/192KHz Hi-Res decoding, studio-grade sound quality! ✅ 31-Band EQ + 15ms Time Alignment：Perfect soundstage tuning for every seat in your car. ✅ Dual USB &amp; Lossless Playback：Directly play FLAC/APE/WAV files via USB drive or smartphone. ✅ PC/iOS/Android Tuning Apps：User-friendly interface for pro-level audio customization. ✅ 9-16V Wide Voltage &amp; 0.35A Standby：Energy-efficient design for all vehicles. Perfect For：Car audio enthusiasts, Hi-Fi music lovers, and DIY upgraders. 

Audio Winner ODM factory 4channel car amplifier with 6 channel dsp processor 

This car audio equalizer showcases a robustly constructed housing, promising a long lifespan. The front panel features easy-to-operate rotary knobs. The equalizer allows adjustment at five bands. With audio and video input support, the car equalizer makes a convenient entertainment tool. 

 
  Five equalization bands (at 55Hz, 250Hz, 500Hz, 2KHz and 10KHz). 
  Adjustable from -18dB to +18dB. 
  Supports USB, SD, MMC and&nbsp;MS input. 
  Supports MP4, JPEG, DIVX, AVI, WMA, AAC and&nbsp;MP3 decoding. 
  Supports CVBS video output. 
 

Car Audio Equalizer

E48.4D CLASS D DSP Amplifier – High-Efficiency Powerhouse ✅ 4 High-Level + Coaxial/Optical/USB Inputs：Audiophile-grade digital signal transmission. ✅ CLASS D Dual Power Mode：50W×4@4Ω / 60W×4@2Ω, high-efficiency with minimal heat. ✅ CIRRUS LOGIC 3-Core DSP：24Bit/192KHz decoding for studio-level clarity. ✅ 31-Band EQ &amp; 15ms Time Alignment：Pinpoint soundstage tuning for driver-focused audio. ✅ Bluetooth 5.1 &amp; Dual USB Lossless：Play FLAC/APE directly via USB or wireless streaming. ✅ LCD Remote + 10 Presets：Cross-platform control (PC/iOS/Android) with instant switching. ✅ 9-16V Voltage &amp; 0.45A Standby：Energy-saving design for all vehicle types. Built For：Bass-heavy systems, digital source upgrades, and road trip enthusiasts.  

Audio Winner 8channel Car Amplifier with DSP Car audio processor 

   The is a car amplifier which is electronical   The color of the car amplifier is black, with silver ventilated accessories   This car amplifier is rectangular in shape  

This 4-band equalizer is specifically designed in a standard size for cars. It is professionally engineered with a built-in subwoofer to produce powerful sound effects. It allows you to listen to music with depth and clarity.
 
  With level and frequency controls. 
  One-half DIN-size chassis. 
  DC-DC switching power supply. 
 

4-Band Equalizer

S48.6D 6-Channel DSP Amplifier – AI-Powered Beast ✅ 4 High-Level + Optical/External BT Inputs：Zero-compromise signal integrity. ✅ CLASS D Dual Power Modes：40W×6@4Ω / 70W×6@2Ω, SPL-ready efficiency with 90dB SNR. ✅ CIRRUS 32-bit DSP Core：24Bit/192KHz Hi-Res processing, reference-grade clarity. ✅ 31-Band EQ + AI Auto-Tuning：15ms smart calibration for competition-grade sound. ✅ LED Remote + Tri-Platform Control：iOS/Android/PC sync with 10 pro presets. ✅ **-40℃~80℃ Extreme Durability**：Overload/heat protection for off-road adventures. ✅ Expandable Bluetooth 5.0：Add wireless freedom (module sold separately). Engineered For：Multi-zone systems, SPL competitions, and polar expedition vehicles.  

Audio Winner ODM Factory 6channel car amplifier with 8channel DSP Car audio processor 

東莞市天逸電子有限公司

This is a car amplifier that comes with a robust housing for enhanced durability. It is well designed to deliver excellent sound quality with high fidelity. This car amplifier is an ideal addition to complete your vehicle.
 
  Power: 1 x 1,200W. 
  Digital class D mono block with a remote control. 
 

Shenzhen Music Way Technology Co.,Ltd.

D1S with plug play cables enhances the sound of factory sound system, just doesn't get any easier than this.  Features • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP(ADAU1701),,controllable via PC software • Signal-to-noise Ratio ≥90dB • Frequency Response 15 Hz – 22 kHz (-3dB) • THD ≤0,02% (1 kHz, 4Ω, 90% Power) • Plug+Play with vehicle-specific cable sets  Specification Power output(RMS) @ 14.4 VDC, 1% THD: 4CH @ 4 Ω：25 W x 4 4 x High Level Input 2 x AUX/RCA Input 4 x Loudspeaker Output amplified 6 x Pre-Amplifier Output/RCA (configurable via DSP) Dimensions: 165 x 98 x 32 mm 

DSP Amplifier

The new M4+v3 DSP amplifier can be considered as the little brother of the M6 model. The only difference: The M4+ is coming with four amplified speakers, but still offering more power per channel than the larger M6. The newly engineered Class D technology is particularly immune to EMC interference, which is virtually indispensable in today‘s electronic-packed vehicles.  A key-premise to enjoy interference-free music while driving. With four bridged power outputs, each one providing 135 watts RMS per channel (2 Ω), the M4+v3 offers remarkable output power with a total of 540 watts RMS. M4 + is perfect for tuning original 4-channel sound systems. Four additional DSP-tunable preamp outputs allow the integration of further amplifiers.  Features • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP (ADAU1452) • 32bit, 295 MHz DSP technology, controllable via new V3 PC software or Tunest App • Soft-Clipping (power attenuation) in 2 Ohm operation • Signal-to-noise Ratio ≥90dB • Frequency Response 15 Hz – 22 kHz (-3dB) • THD ≤0,1% (1 kHz, 4Ω, 90% Power) • Separately controllable input sensitivity (Channel 1-6, AUX), Clipping LEDs • Plug+Play with vehicle-specific cable sets • External Bluetooth® USB-Dongles BTS, BTS-HD &amp; BTA2 for Audio Streaming &amp; App Control (optional) • Digital remote control DRC1 with OLED display for controlling various DSP functions (optional)  Specification Power output(RMS) @ 13.8 VDC, 1% THD: 4 x 100/135 Watts RMS @ 4/2 Ω or 2 x 270 Watts RMS @ 4 Ω bridged 6 x High Level Input 6 x RCA Low Level Input* 2 x AUX/RCA Input, 1 x Optical Input/Stereo 4 x Loudspeaker Output amplified 4 x Pre-Amplifier Output/RCA (configurable via DSP) Dimensions: 220 x 44 x 150 mm * only with optional MPK-RCA6/MPK-RCA6-PP cable 

M4 4-Channel Class D Amplifier with 6-Channel DSP · 340 Watts RMS  Features • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP(ADAU1452) • 32bit, 295MIPS DSP technology, controllable via new V3 PC software or Tunest App • Signal-to-noise Ratio ≥90dB • Frequency Response 15 Hz – 22 kHz (-3dB) • THD ≤0,1% (1 kHz, 4Ω, 90% Power) • Controllable AUX input sensitivity, Clipping LEDs • Plug+Play with vehicle-specific cable sets  Specification Power output(RMS) @ 14.4 VDC, 1% THD: 4CH @ 4 Ω：45 W x 4 4CH @ 2 Ω：65 W x4 2CH - (bridged 1/2; 3/4) @ 4 Ω: 145 W x 2 4 x High Level Input,10V RMS 2 x AUX/RCA Input, 0.3-2.6V RMS 4 x Loudspeaker Output amplified 6 x Pre-Amplifier Output/RCA (configurable via DSP) Dimensions: 165 x 41 x 150 mm 

GUANGZHOU RICHWEI ELECTRONIC CO., LTD

编号 S83-LH804 4 欧姆：95wX4ch 2欧姆：130wX4ch 4欧姆桥接：260wX2ch 尺寸：330X178X52mm 

car amplifier

TUNING SOLUTIONS Electronic Technology Co., Ltd.

What is it?The Ethernet/Fiber Optic decoder is a component used in the vehicle's multimedia and communication systems. Its main function is to facilitate the processing, conversion, and routing of data between the car's head unit, control modules, and peripheral devices (e.g., amplifiers, displays, and cameras) via high-speed communication networks like Ethernet or fiber optics.For Ethernet, the decoder works to convert Ethernet signals to protocols or formats recognized by other vehicle systems.For fiber optics, it converts optical signals into digital formats. This ensures compatibility with devices that don’t directly process optical signals, such as amplifiers or screens.   Applicable models and yearsCompatible CIC, NBT(ID4),EVO(ID5/ID6), MGU(ID7/ID8)system.   Function Introductions: Enhanced CompatibilityAllows integration of aftermarket devices like multimedia players, cameras, and navigation systems without interfering with the factory system.Ensures compatibility with car's advanced infotainment and Ethernet communication protocols.  High-Speed Data TransmissionLeverages the Ethernet backbone in cars, offering high-speed and low-latency data transmission for real-time processing of multimedia and navigation. Improved Multimedia FeaturesEnables integration of high-definition video and audio, ensuring a premium multimedia experience.  Seamless Integration with OEM SystemsWorks with factory-fitted systems like iDrive and ConnectedDrive, preserving original vehicle functionality and controls.Retains compatibility with car's fiber-optic MOST bus system, maintaining the integrity of communication between components.  Future-ProofingPrepares the car for upcoming multimedia and connectivity technologies that rely on Ethernet infrastructure. Cost-Effective UpgradeEliminates the need for replacing entire systems when upgrading features like rearview cameras, surround view, or other multimedia capabilities.  Plug-and-Play InstallationMany decoders are designed for straightforward installation, minimizing the need for extensive modifications or professional assistance.  Enhanced User ExperienceFacilitates a smoother and more responsive multimedia interface, reducing lag and improving overall functionality.By leveraging the car Ethernet Fiber Decoder, drivers can enjoy advanced multimedia and connectivity features while retaining the reliability and sophistication of the original vehicle systems.        

Ewaygps Audio Fiber Pre-amplifier Interface Module Upgrade Box for ID7 ID8 ID8.5  Ethernet MOST25 Tuning Stereo Adaptor

M6 6-Channel Class D Amplifier with 8-Channel DSP · 630 Watts RMS  Features • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP (ADAU1452) • 32bit, 295 MHz DSP technology, controllable via new V3 PC software or Tunest App • Soft-Clipping (power attenuation) in 2 Ohm operation • Signal-to-noise Ratio ≥90dB • Frequency Response 15 Hz – 22 kHz (-3dB) • THD ≤0,1% (1 kHz, 4Ω, 90% Power) • Separately controllable input sensitivity (Channel 1-4, Channel 5-6), Clipping LEDs • Plug+Play with vehicle-specific cable sets • External Bluetooth® USB-Dongles BTS, BTS-HD &amp; BTA2 for Audio Streaming &amp; App Control (optional) • Digital remote control DRC1 with OLED display for controlling various DSP functions (optional)  Specification Power output(RMS) @ 13.8 VDC, 1% THD: 6 x 70/105 Watts RMS @ 4/2 Ohms or 3 x 210 Watts RMS @ 4 Ohms bridged 6 x High Level Input 8 – 20 V RMS 6 x RCA Low Level Input* (RCA) 2 – 6 V RMS 1 x AUX Input/Stereo (RCA) 2 – 6 V RMS 1 x Optical Input/Stereo (PCM, 96 kHz / 24 bit) 6 x Loudspeaker Output amplified 2 x Pre-Amplifier Output (RCA) 4 V RMS (configurable via DSP) Dimensions: 150 x 44 x 220 mm * only with optional MPK-RCA6/MPK-RCA6-PP cable set 

竹記貿易股份有限公司

 	 QAX-8012DSP 	 4 Channels High Power Amplifier 	 2/4 Ohm Stable in Stereo Mode 	 Coaxial input 	 Optical fiber input 	 Optional: Extend Blue-tooth 	 31 sections DSP adjustable EQ 	 Mobile Phone App control with Volume adjusting 	 Blue-tooth Lossless music play  

Shenzhen Actiway Electronics Co., Ltd.

 	 Super power full range car amplifier class AB, 1 &Omega; stable operation Die cast terminals/Gold plated RCA jacks Bridgeable, Illminated Logo Short circuit/Thermal/Overload/DC offset protection Variable phase shift/Subsonic filter Gain control/Bass boost  

我的採購

確定要取消關注此供應商？

確定要取消關注此供應商？