Transfer Printing

Bureau Veritas HK Ltd

This C/US marks is a heating test to prove the electrical and electronic product meets the safety standards or requirements. The certificate service provides access to C/US marks for U.S. and Canada. It has been accepted by some of the large retailers in USA such as Disney and WalMart.
    Accreditation or appointment are not provided  Working with independent third parties on our clients behalf  Compliance management teams provide excellent service  A proof of the quality of your product  

Heating Test

REC Green Technologies Co., Ltd.

iFCU™ has successfully attained the Platinum recognition in CIC Green Product Certification.iFCU™adopted the patented technology with rotor of a permanent magnet to generate magnetic flux. Its advantages are to eliminate the source of power loss and achieve a high energy efficient operation.By replacing mechanical brushes, permanent magnet motor can also minimize the noise level and waste heat generation, thus improves motor lifespan.With variable speed drive, the motor further enhances efficiency system compared to traditional fixed speed AC motor designs.Major Features:Variable speed FCU fully controllable “AUTO” mode is available in iFCU™, stepless variable fan speed is controlled based on room temperature set point. Reduce energy use while maintaining comfortable condition, e.g. unoccupied mode to maintain the minimal RPM and energy ussage. Programme Customization to fit client’s application/configuration Tailor-made programme to work with different system and fit the occasions requirements. Modbus Thermostat, Room control unit (0-10V), Group Control, RPM adjustment &amp; wireless group control etc. Duct type sensor Installed in return-air box to control temperature accuracy up to ± 0.5oC to increase human comfort. Both high &amp; low static Applicable to both high &amp; low static pressure setting. Wi-Fi Control Can be controlled through any mobile device. 

iFCU™ Intelligent Fan Coil Unit (EC Motor / BLDC Motor / PM Motor)

AI-EOS designed to optimize the energy consumption of the central air-conditioning system, it responds to the real-time system load and changes in the external weather condition to continually monitor and control different system components. With big data analysis, the optimal set points can be calculated to reach the lowest energy consumption of the system while maintaining the thermal comfort of the occupants. The effects of the equipment degradation are also taken into consideration by the software solution. The first application project of AI-EOS, Holiday Inn Express Hong Kong SoHo, reaches 30% in system energy saving performance. AI-EOS has been implemented in other public projects, and the results are significant. Besides EOS, we plan to apply the BIG Data Analysis to other applications, such as the control of sewage plant pumping station.Applications: AI-EOS is not only applicable in new buildings. With the high level interface, it is able to implement the control algorithms to communicate with existing iBMS. Existing BuildingEOS can be integrated to the new BMS platform directly.New BuildingCommunicates with the existing BMS via high level interface e.g. Open Protocol (BACnet/Lonworks).The operation data of HVAC system will be shared to EOS through high level interface.RequirementsChiller with high-level interfaceHigh-level interface with BMS by Open Protocol. (e.g., BACnet, Lonworks, Modbus, etc.)

AI Energy Optimization Solution (“AI-EOS”) for HVAC System

Keppel Seghers - Zhen Hua Joint Venture

Keppel District Heating and Cooling Systems (Keppel DHCS) is the first and largest District Cooling Systems (DCS) developer and service provider in Singapore with presence in China and Thailand, delivering more than 70,000 Refrigeration Tonnes (RT) of cooling capacity across major business and industrial parks. The first DCS plant in Changi Business Park, Singapore commenced operations in June 2000. It has a design capacity of 37,500 RT to provide DCS services to the 66-ha business park, which is home to a mix of high-technology business, data and software enterprises, research and development divisions, and data-intensive facilities.  In an urbanising world, the densification of population in cities has given rise to the need for sustainable cooling solutions. District Cooling Systems (DCS) are able to meet such needs with a multitude of benefits.  Keppel DHCS aims to create lasting benefits for our stakeholders by partnering them to deliver sustainable district heating and cooling solutions that conserve energy and protect the environment. 

Mediapolis District Cooling System (DCS) by the Park @One-North (Singapore)

The Hong Kong Standards And Testing Centre Ltd (STC)

We offer calibration services for assorted electrical products. Our services are professional and reliable. Our calibration services have won a good reputation in the industry. For electrical products.Mechanical metrology, thermometry mass and other services.To know more or enquire any specific service, please visit https://www.stc.group and fill in our enquiry form on https: www.stc.group/contact. 

Calibration Service

Advance Label Ltd

We have our own factory in China to process the hot stamping production. Hot stamping foil can provide an outstanding outlook of your products or packaging and catch the attention of customers.

The hot stamping can mainly apply to following features: 	 Food menu 	 Hang Tag 	 Product packing 	 Paper materials texture 	 Plastic materials texture 	 Bottle top of wine 	 Packing label of food and drink 	 Security label 	 Company logo sticker 	 Magazine or booklet  We welcome any OEM or ODM inquiries about printing or packaging. We will try our best to provide professional advices to our customers and help them to develop satisfied products.

Hot Stamping Foil Printing Service

 High-performance textiles are engineered textile materials for enhanced performance for a variety of functions such as in sporting apparel, outerwear, workwear, active and leisure wear, and protective wear, etc. As a result of increased popularity for fashionable and functional products, the demand for high-performance textile integration into everyday clothing is fast growing in the apparel and textile industry.Our technical experts can provide tailor-made performance testing solutions to meet your specific product requirements. STC’s high-performance textiles testing services can assist manufactures and retailers in evaluating and ensuring that textile performance functionalities are met so that you can market your products with confidence. Leading brands and government tenders trust STC in providing accurate and reliable high-performance textile testing services.Our high-performance textile testing services include:Comfortable Performance Moisture Management TestingStretch and Recovery TestingThermal Resistance TestingWater Vapor Permeability TestingProtective Performance Personal Protective Equipment (PPE) – Garments, Footwear, Gloves, etc.Retro-reflection TestingUV ProtectionWeather TestingEasy-Care Performance Oil Release TestingWater Repellency TestingWash &amp; Wear TestingTo know more or enquire any specific service, please visit https://www.stc.group and fill in our enquiry form on https: www.stc.group/contact. 

High Performance Textiles Testing

Mecca Electronics Co Ltd

X-Ray InspectionX-Ray Inspection is a non-destructive test method used to examine hidden solder connections, such as those under BGA and QFN components. It effectively identifies defects like solder voids, bridges, and misalignment that are invisible to the naked eye, ensuring the structural and electrical integrity of complex PCB assemblies. 

X-Ray inspection

Special hot foil design uses metallic foil (such as gold, silver, or rose gold) to create a high-quality, metallic sheen, three-dimensional effect, and abrasion resistance on printed materials like business cards, packaging, and labels. This enhances the luxury appeal and brand value of the product. We offer customized gold foil effect upgrades, providing an immediate visual enhancement. - Textured hot foil stamping effect, uniquely creative. - Can be applied to various materials (such as packaging labels, paper boxes, cards, greeting cards, invitations, certificates, and customized gifts, etc.). - Offers customized hot foil stamping upgrades to provide an immediate visual enhancement. - Professional advice and design services are available. 

Special hot foil design , printing , packaging services 

Ching Luen Printing Co Ltd

 Highlighted is a prepress service flaunting excellent and closely monitored processes like color separation. The service features the adoption of computer to plate (CTP) system and a set of color plate making systems from Apple computers. Various advanced imaging and printing equipment is used to ensure the highest prepress quality. Highly efficient.Well-trained professional personnel.

Prepress Service

This flammability testing service is led bya team of experienced professionals. The high efficiency and accuracy allow you to continue your business in a low-cost way. This testing service is a nice choice for small- to large-sized companies. Compatible with different product standards.Excellent after-sales support.To know more or enquire any specific service, please visit https://www.stc.group and fill in our enquiry form on https: www.stc.group/contact. 

Flammability Testing Service

TUV Rheinland HK Ltd

more detail: https://www.tuvrblog.com/wp-content/uploads/2025/02/%E4%BF%9D%E6%B8%A9%E6%9D%AF%E7%AD%89%E9%A5%AE%E5%93%81%E5%AE%B9%E5%99%A8%E6%B5%8B%E8%AF%95%E5%92%8C%E8%AE%A4%E8%AF%81%E6%9C%8D%E5%8A%A1-SCEN.pdf 

Testing and Certification Services for Thermal Mugs and Other Beverage Containers

We offer radio frequency and electromagnetic testing services for customers. We use high-quality equipment to test and provide precision results. Our services are professional and reliable. Providing technical support services.Assist and strengthen the product modification.To know more or enquire any specific service, please visit https://www.stc.group and fill in our enquiry form on https: www.stc.group/contact. 

Radio Frequency and Electromagnetic Testing

STEP HERO INTERNATIONAL LIMITED

Highlighted is a prepress service&nbsp;flaunting excellent and closely monitored processes like color separation. The service features the&nbsp;adoption of&nbsp;computer to plate (CTP) system and a set of color plate making systems from&nbsp;Apple computers.&nbsp;Various advanced imaging and printing equipment&nbsp;is used to ensure the highest prepress quality.&nbsp;

 
  Highly efficient.&nbsp; 
  Well-trained&nbsp;professional personnel.&nbsp; 
 

Easy Carbon Technology (Guangdong) Co., Ltd

Carbon footprint aims to quantify the greenhouse gas emissions across the entire life cycle of an organization or product, identifying major emission sources. Based on international standards (GHG Protocol or ISO 14064), it systematically collects data on energy use, transportation, supply chains, and other areas to quantify greenhouse gas emissions and create a carbon emissions inventory. By analyzing key processes, it enables the development of science-based emission reduction pathways and action plans, promoting energy efficiency improvements, renewable energy substitution, and low-carbon operations. This supports the achievement of carbon neutrality goals and enhances environmental responsibility, reputation, and sustainable development capabilities. 

Carbon Footprint

Hong Kong Woollen & Synthetic Knitting Manufacturers' Association Ltd

A comprehensive carbon assessment tool is specified for Hong Kong knitwear industry. It delivers interlinked benefits across multiple dimensions for driving climate action which enhance the competitiveness of Hong Kong knitwear industry. Providing a detailed quantification of carbon emissions at different stages of the product lifecyclePinpointing carbon hotspots in unique operations and implementing tailored solutions to reduce the carbon emissions, improve energy efficiency, conserve resources, and minimize waste. To gain a deeper understanding of the tool, you are cordially invited to schedule a 30‑minute meeting via the link below. A consultant from the Hong Kong Productivity Council (HKPC) will provide a one‑to‑one introduction and demonstration of the tool. Book your session now:https://bit.ly/47Vnijo 

Product Carbon Footprint Assessment Tool

Tradelink Electronic Commerce Limited

Convenient and hassle-free service converts paper to digital for submission to the Government. Tradelink converts paper submissions into electronic format for you We can convert your trade compliance documents into an electronic format for submission: Import &amp; Export Trade Declarations (TDEC)Dutiable Commodities Permit (DCP)Certificate of Origin (CO)Electronic Cargo Manifest (EMAN)Road Cargo System (ROCARS) Four Ways to Submit Paper Documents Walk-in ServiceVisit our service centres and let us convert your trade compliance documents including TDEC, DCP, CO, EMAN and ROCARS into an electronic format for submission to the GovernmentEnsures a quick conversion of your paper documents into electronic format upon receiving themExtensive network coverage across Hong Kong Island, Kowloon, and New Territories with around 100 Tradelink Service Centres availableOur partners in providing the service comprises renowned representatives from various organisationsFree Pick-up ServiceA free-of-charge courier pick-up for your paper trade declaration forms from any address you specify for your conversion into electronic format. Service available for TDEC forms only.Call pick-up hotline 8102-2020Your paper TDEC forms will be picked up by us from any address you specifyPhone order placed from 9:00am-1:00pm on Monday to Friday will be picked up in the afternoon on the same dayWe will convert them into electronic format and submit to the GovernmentProperly completed TDEC forms will be converted into electronic declaration messages to send to the Government on the next working dayPostal ServicePost your paper trade declaration forms to us for data processing. Service available for TDEC forms only.Prepare a cheque with sufficient payment, payable to “Tradelink Electronic Commerce Limited”Enclose both the cheque and your completed TDEC forms in a sealed envelope and mail the envelope to below addressWe will convert them into electronic format and submit to the GovernmentIf you wish to receive the official payment receipt by post, please include a self-addressed envelope with sufficient postage with the forms.Data Entry ServiceWe provide a cost-effective data entry service to customers with resources issues whether long term or ad-hoc in handling import/export declarations (e.g. resources constraints, without staff possessing the know-how to handle the work).Send us your shipping documents (e.g. bill of lading/packing list/invoice, etc.) by email or our pick-up service. We will input all relevant information including corresponding HS codes into the trade declaration forms to prepare the electronic submission to the Government. Service available to TDEC forms only.

Paper-to-electronic Conversion Services

Drawing on a complete understanding of government regulations and policy that apply to electrical and electronics industry, STC can help you to test Radio Frequency (RF) and ElectroMagnetic Compatibility (EMC) in accordance with various international standards.  EMC Tests for R&amp;TTE: 27 MHz Remote controlled Transmitter and Receiver27 MHz Walkie Talkie40 MHz Remote controlled Transmitter and Receiver433MHz Remote controlled Transmitter and Receiver868MHz Remote controlled Transmitter and Receiver2.4GHz Remote controlled Transmitter and ReceiverTo know more or enquire any specific service, please visit https://www.stc.group and fill in our enquiry form on https: www.stc.group/contact. 

EMC Tests for R&TTE

Hong Kong Council for Testing and Certification

Why should you use Hong Kong’s testing and certification services? High Professional IntegrityGood Intellectual Property ProtectionHigh Technical CompetenceQuick Response to Market NeedsRobust Accreditation System Being Highly Regarded InternationallyA Free Port with Excellent Logistics SupportYou can find more information about Hong Kong’s testing and certification sector from the website of the Hong Kong Council for Testing and Certification (HKCTC): www.hkctc.gov.hk To find quality reports / certificates? Look for the HKAS Accreditation Symbol! All endorsed test reports / certificates issued by Hong Kong Accreditation Service (HKAS) accredited organisations bear the HKAS accreditation symbol with the registration number of the accredited organisations. Wide Recognition of HKAS-AccreditedOrganisations HKAS’ accreditation is recognised in over 100 economies, including all major trading partners of Hong Kong such as the United States, European Union, Mainland China and Japan. Accreditation helps users to identify reliable conformity assessment service providers. You can find service providers accredited by HKAS and their scope of accreditation from the website of HKAS:www.hkas.gov.hk 

Tested in Hong Kong - Certified in Hong Kong

We can offer a comprehensive calibration service. We have a professional team to offer accurate calibration results. We provide great calibration services according to recognized national standards. Accurate results.Traceable to recognized national standards.To know more or enquire any specific service, please visit https://www.stc.group and fill in our enquiry form on https: www.stc.group/contact. 

Paryocean (Asia Pacific) Int'l Co., Ltd.

作为值得信赖的 I-REC 参与者和注册机构，我们提供直接来自母公司位于孟加拉国的太阳能发电厂的一手可再生能源证书。选择我们的 I-REC 服务，确保您的企业实现透明、可追溯且高效的碳减排。 As a trusted I-REC Participant &amp; Registrant, we provide first-hand renewable energy certificates sourced directly from our parent company’s solar power plants in Bangladesh. By choosing our I-REC services, you ensure transparent, traceable, and high-impact carbon reduction for your business. 

際再生能源憑證 IREC

In accordance with the ISO 14064 or GHG Protocol standards, a comprehensive carbon inventory is conducted for an organization's greenhouse gas emissions over a specific year. It covers Scope 1 (direct emissions), Scope 2 (indirect emissions from purchased electricity, heat, and steam), and key Scope 3 emissions. By collecting data on energy consumption and production activities, the total carbon emissions are calculated and a carbon inventory report is prepared. This process identifies major emission sources, providing data support for setting emission reduction targets, complying with carbon regulations, and enhancing green competitiveness, thus facilitating corporate low-carbon transformation. 

Carbon Inventory

Compliance to flammability requirements can be demonstrated through flammability testing done by trusted independent third-parties. STC’s state-of-the-art laboratories and flammability testing services can help manufacturers evaluate their products and materials to ensure safety and regulatory compliance.  Our Flammability Testing services include: Apparel &amp; Textile CPSC 16 CFR 161016 CFR 161116 CFR 1615 / 1616BS 5722 / BS EN 14878Upholstery Furnishing -Bedding, Pillows, Quilts, Seating &amp; Mattresses 16 CFR 1632 / 1633CA TB116 / TB117CA TB133BS 7177ISO 12952 / BS 7175UK Furniture and Furnishings (Fire Safety) Regulations 1988HK Fire Safety Regulations, BS 7176 Curtains NFPA 701BS 5867Carpets 16 CFR 1630 /1631BS 4790Construction &amp; Building Materials Non-Combustibility Test for Materials(BS 476: Part 4)Fire Propagation Tests(BS 476: Part 6)Classification of Surface Spread of Flame of Products(BS 476: Part 7)Fire Classification of Construction Products &amp; Building Elements(EN 13501-1)If you have any further question, please feel free contact us or visit our website. To know more or enquire any specific service, please visit https://www.stc.group and fill in our enquiry form on https: www.stc.group/contact. 

Flammability Testing

Nemko Hong Kong Limited

IECEx is an international approval scheme for explosion protection equipment. The IECEx CoC and related QAR can be accepted worldwide in those countries without mandatory national EX approval. For those countries and region with mandatory EX approval scheme, IECEx CoC and QAR are best document to be used to obtain the national EX approvals without in country testing. Nemko is a member of IECEx scheme and we can issue IECEx CoC as well as performing audit and issue QAR. 

My Sourcing