Surgical Instruments

Zhangzhou Eastern Intelligent Meter Co Ltd

AC Voltage: 6-60-600-750v DC Voltage: 6-60-600-1000v AC Current: 60-600-1000A DC Current: 60-600-1000A Resistance: 600-6k-60k-600k-6M-60MΩ Frequency: 9.999Hz-99.99Hz-999.9Hz-99.99kHz-999.9kHz-9.999MHz Capacitance: 6nF-60nF-600nF-60μF-600μF-6mF Duty Cycle: 5% ~ 95%. Temperature: -20°C -1000°C Diode: Yes Continuity: Yes 

EM4650 AC/DC Current Digital Clamp Meter

SHENZHEN VICIMETER TECHNOLOGY CO.,LTD.

CM-2016 AC/DC 3 5/6 counts Digital Clamp Meter  Features: Clamp opens 28mm Portable design, easy use Clamp light, Backlight, Flash light Large LCD display makes reading clear CE standard design, improves the safety of the test Full function protection, strong anti-interferential performance Duty cycle test, REL test, NCV, TRMS test, data hold, APO function  Technical Data: Basic function Range Accuracy DCV 600mV/6V/60V/600V ±(0.5%+5) ACV 6V/60V/600V ±(0.8%+5) DCA 60A/600A/800A ±(1.5%+5) ACA 60A/600A/800A ±(1.5%+5) Resistance 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ ±(0.8%+1) Capacitance 6nF/60nF/600nF/6uF/60uF/600uF/6mF/60mF ±(2.5%+5) Frequency 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz ±(0.5%+4) Temperature (-40 to 1000 )℃, (-40 to 1832 ) ℉ ±(1.0%+5)  Special Function: Model CM-2016 Diode test √ Continuity test Less than 50Ω Low battery indicator Low battery indicator Approx. less than 2.6 V Data hold √ NCV √ Auto power off About 15 minutes TRMS test √ Function protection √ Clamp light √ Backlight display √ Input impedance 10MΩ Sampling rate 3 times/s AC frequency response 40 to 2000Hz Operation method Auto or manual range Max display 6000 Clamp opens 28mm Battery 3V (2*AAA battery)  General Characteristic： Meter color Orange and Black Meter weight About 200g (including battery) Meter size 185*65*32mm Standard accessory Test leads, battery, manual, temperature probe, carrying case Standard packing Gift box Carton size 41.5*28*46.5CM Standard QTY per carton 40pcs    G.W per carton 15kg 

Vicimeter CM-2016 AC DC 800A Clamp Meter

CM-2056 AC/DC 3 3/4 Digital Clamp Meter Features: 1. Clamp opens 52mm; 2. Large LCD display makes reading clear; 3. Full function protection, strong anti-interferential performance; 4. CE standard design, improves the safety of the test; 5. Duty cycle test, REL test, data hold; TRMS, NCV; 6. Clamp light, backlight display.  Technical Data: Basic function Range Accuracy DCV 400mV/4V/40V/400V/1000V ±(0.5%+5) ACV 400mV/4V/40V/400V/750V ±(1.0%+5) DCA 40A/400A/1000A ±(2.0%+5) ACA 40A/400A/1000A ±(2.0%+5) Resistance 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ ±(0.8%+3) Capacitance 4nF/40nF/400nF/4μF/40μF/400μF/4mF/40mF ±(3.5%+10) Frequency 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz ±(0.5%+5) Temperature (-40~ 1000) ℃ （-40~1832℉） ±(1.0%+5) Special Function: Model CM-2056 NCV test √ True RMS test √ Diode test √ Continuity test Less than 30Ω Low battery indicator Approx. less than 2.4 V Data hold √ Auto power off About 15 minutes Function protection √ Clamp light √ Backlight display √ Input impedance 10MΩ Sampling rate 3 times/s AC frequency response 40-2kHz Operation method Auto or manual range Max display 4000 Clamp opens 52mm Battery 3V (2x1.5V AAA) General Characteristic: Meter color Orange and Black Meter weight About 280g (including battery) Meter size 270×123×35mm Standard accessory Test leads, battery, manual, TP01 temperature probe Standard packing Gift box + Black bag Carton size 55.8*30.5*40CM Standard QTY per carton 30pcs    G.W per carton 16.8kg 

Vicimeter 52mm Jaw CM-2056 1000A AC DC Clamp Meter

CM-2018 AC/DC 3 5/6 Digital Clamp Multimeter   Features: 1. Clamp opens 28mm 2. AC DC T-RMS, NCV, LPF（VFC）, LoZ V function 3. Clamp light, Backlight, Flash light 4. Max. 6000 digits large LCD display 5. CE standard design, improves the safety of the test 6. Full function protection, strong anti-interferential performance 7. Duty cycle test, REL test, data hold, Auto power off function  Technical Data: Basic function Range Accuracy DCV 600mV/6V/60V/600V ±(0.5%+5) LoZ 0V~600V ±(2.0%+10) ACV 6V/60V/600V ±(0.8%+5) LPF 0V ~ 600V ±(4.0%+5) LoZ 0V ~ 600V ±(2.0%+10) DCA 60A/600A/800A ±(1.5%+5) ACA 60A/600A/800A ±(1.5%+5) Resistance 600Ω/6KΩ/60KΩ/600KΩ/6MΩ/60MΩ ±(0.8%+1) Capacitance 6nF/60nF/600nF/6uF/60uF/600uF/6MF/60MF ±(2.5%+5) Frequency 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz ±(0.5%+4) Temperature (-40 to 1000 )℃, (-40 to 1832 ) ℉ ±(1.0%+5) Special Function: Model CM-2018 NCV test √ (clamp &amp; red test lead detecting) True RMS test √ LPF (VFC) function √ LoZ function √ Low battery indicator Approx. less than 2.6 V Data hold function √ Auto power off About 15 minutes Diode test √ Continuity test Less than 50Ω Duty-cycle test √ REL test √ Clamp light function √ Backlight display √ Orange backlight display for high volt √ Input impedance 10MΩ Sampling rate 3 times/s AC frequency response 40-2kHz Operation method Auto or manual range Max display 6000 Clamp opens 28mm Battery 3V (2*AAA battery) Power consumption Quiescent current approx. 2mA  General Characteristic： Meter color Orange and Black Meter weight About 200g (including battery) Meter size 185*65*32mm Standard accessory Test leads, battery, manual, temperature probe, carrying bag Standard packing Gift box Carton size 41.5*28*46.5CM Standard QTY per carton 40pcs    G.W per carton 15kg Note: for the NCV detecting function, this clamp meter is not only can detect the NCV by clamp, but also can be directly touched by the red stylus probe to detect cable that could not be reached by the clamp. 

Vici CM-2018 Loz LPF AC DC 800A Clamp Meter with Orange display alarm and Live test function

Meet (China) Ltd

	When connected through ‘Bluetooth Integrated’ device transmit data to Smart phone / Tablet / PC using iOS APPS / Andriod APPS / PC software	CAT II, 600V (AC/DC); CAT III, 300V (AC/DC)	Count / Digit : 6000/3-3/4	True RMS	Auto / Manual voltage	Auto / Manual Ω	Diode check	Continuity	AC/DC current measurement	Capacitance	Frequency	Hz/Duty cycle 1-99%	Non-Contact AC Voltage Detector 	Single Probe Test AC Voltage	Non-Contact Frequency Detection	input impedance	Anti-Burn Protect on full range	Low battery indication

Wireless Connectivity AC / DC Clamp Meter

Shenzhen Mestek Electronics Co., Ltd.

Digital Clamp Meter T-RMS 10000 DC/AC 200A 6mA Ammeter Multimeter Car Current Voltmeter Capacitance Temp Tester CE Clamp MeterKey attributesIndustry-specific attributesDisplay TypeDigital Only Measuring Current Range0~200A Measuring Voltage Range0~600V Measuring Resistance Range0~10MΩ Measuring Capacitance Range0~6mF Measuring Inductance RangeNO Other attributesPlace of OriginGuangdong, China Brand NameMestek Model NumberCM83D Operating Temperature0℃~40℃ Dimensions220*110*55mm Weight420g ColorBlack+Blue Product nameClamp Multimeter NameClamp Meter Manual Display10000 Counts Power supply2x1.5V AAA Batteries(not included) Safety LevelIEC61010-1, CAT III 600V FrequencyTest Frequency with AC Current Range Data holdYes BacklightYes NCVHave Shenzhen Mestek Electronics Co.,LTD,business mogel for testing instruments for more than 15 years.Our engineers have been in this industry for over 15 years and served some of the most famous customers from all over the world.We can provide below services for all our partners in this challenging world.1.Fast delivery,1~5 days delivery time for Mestek Products.2.Small MOQ requirementsfor all our items, 1PCS is also acceptable.3.Exclusive Partnership in different regions4.OEM&amp;ODM Design services for brightideals.5.Free samples avaiable for partners.All our items are coming with CE certification and we have special team work for after sales services 7*24 to help you solve any kind of problem.We are ready for sign contract with you in case you need it, as honest dealer, we never crook our customers.Come and let us make a difference together !ModelCM83DCounts10000 countsDC voltage0~600VAC voltage0~600VDC current0~200AAC current0~200ADiode,True-RMS,Date hold,Backlight,Flashlight,Backlight,Auto power off,NCV detectSupportResistance0~10MΩCapacitance0~6mFRCD leakage testingHavePackaging and deliverySelling Units:Single item Single package size:22X11X5.5 cm Single gross weight:0.500 kg

CM83D AC/DC Clamp Meter

 	 When connected through &lsquo;Bluetooth Integrated&rsquo; device transmit data to Smart phone / Tablet / PC using iOS APPS / Andriod APPS / PC software 	 Resistor measurement 	 Continuity 	 AC/DC current measurement 	 AC/DC voltage measurement 	 Anti-Burn Protect on full range 	 Backlight &amp; Low battery indication  

Wireless Connectivity Open Jaw AC/DC Clamp Meter

CM-3002 6000 counts Smart AC DC Clamp Meter Features: Auto identification smart; Large colorful LCD; Max. clamp open28mm; Clamp light, Backlight, Flash light; CE standard design, improves the safety of the test; Full function protection, strong anti-interferential performance; Duty cycle test, REL test, NCV, TRMS test, data hold, APO function.       Technical Data: Basic function Range Accuracy DCV 600mV/6V/60V/600V ±(0.5%+5) ACV 600mV/6V/60V/600V ±(0.8%+5) ACA 60A/600A/800A ±(1.5%+5) DCA 60A/600A/800A ±(1.5%+5) Resistance 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ ±(0.8%+2) Capacitance 60nF/600nF/6uF/60uF/600uF/6mF/60mF ±(2.5%+5) Frequency 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz ±(0.5%+4) Temperature (-40 to 1000 )℃, (-40 to 1832 ) ℉ ±(1.0%+5) Special Function: Model CM-3000/CM-3002 Max display 6000 NCV √ TRMS test √ Live test √ Continuity test Less than 50Ω Low battery indicator Low battery indicator Approx. less than 2.6 V Data hold √ Auto power off About 15 minutes Diode test √ Function protection √ Clamp light √ Backlight display √ Input impedance 10MΩ Sampling rate 3 times/s AC frequency response 40Hz to 2000Hz Operation method Auto range Clamp opens 28mm Battery 4.5V (3*AAA battery) General Characteristic： Meter color Red and Black Meter weight About 200g (including battery) Meter size 185*65*32mm Standard accessory Test leads, battery, manual, TP01 temperature probes Standard packing Gift box Carton size 41.5×28×47 CM Standard QTY per carton 40pcs    G.W per carton 15KG 

Vici CM-3002 Large Color Display Auto Intelligent AC DC Clamp Multimeter

Standard Instruments Co Ltd

This clamp meter provides accurate AC, AC/DC current and voltage readings regardless of the waveforms. This meter can use in most industrial and commercial applications where non-linear loads distort the current or voltage waveform.
 
  Reliable operation. 
  Features accessories such as test leads, carrying case and temperature probe. 
 

Clamp Meter

Dongguan Habotest Instrument Technology Co., Ltd.

HT208A AC Digital Clamp Meter AC Current Voltage Resistance Capacitance,T-RMS Tester  This clamp meter is a portable, handheld professional meter that measures AC/DC voltage, AC current,Capacitance, resistance.    Features: Can measure AC/DC voltage, AC current, resistance , capacitance, duty, temperature, Frequency NCV and test continuity. Manual or Auto measurement function and range. Overload protection for the whole measurement range. LCD with double color light,when measuring big voltage and current, it automatically turns orange red color,more safe; Data hold function, low battery indication, auto power off. AC bandwidth, Diode test Suitable for electrical equipment testing and maintenance. 

Habotest HT208A AC Clamp Meter 1000A AC Current Voltage Resistance Capacitance / T-RMS Tester 

CM-2030 3 1/2 AC Digital Clamp Meter  Features: 1. Clamp opens 52mm; 2. Large LCD display makes reading clear; 3. Full function protection, strong anti-interferential performance; 4. CE standard design, improves the safety of the test; 5. Data hold and NCV function; 6. Clamp light and backlight display.  Technical Data: Basic function Range Accuracy DCV 200mV/20V/1000V ±(0.5%+2) ACV 20V/750V ±(1.0%+5) ACA 200A/1000A ±(2.0%+5) Resistance 200Ω/2kΩ/20kΩ/200KΩ/2MΩ/20MΩ/200MΩ ±(0.8%+1) Temperature -40℃ to +1000℃ / -40℉ to +1832℉ ±(1.0%+5)  Special Function: Model CM-2030 NCV test √ Diode test √ Continuity test Less than 50Ω Low battery indicator Approx. less than 7.5 V Data hold √ Function protection √ Clamp light √ Backlight display optional Input impedance 10MΩ Sampling rate 3 times/s AC frequency response Current 50-60Hz/ voltage 40-200Hz Operation method Manual range Max display 1999 Clamp opens 52mm Battery 2PCS (1.5V) AAA  General Characteristic: Meter color Orange and Black. Meter weight About 280g (including battery) Meter size 270×123×35mm Standard accessory Test leads, battery, Temperature probe, manual Standard packing Gift box Carton size 55.8*30.5*40CM Standard QTY per carton 30pcs G.W per carton 16.8kg 

Vicimeter CM-2030 AC 1000A DC 1000V AC 750V 200MΩ Clamp Meter

Xi'An Beicheng Electronics Co.,Ltd

VICTOR 6019D 5999 words display HIGH PRECISION Digital Clamp Meter with Dual integration A/D conversion measurement method This instrument is a digital intelligent clamp meter with built-in lithium battery power supply, TYPE-C charging interface, and can automatically recognize measurement or manually switch functions. It is easy and convenient to operate. The instrument adopts 20mm word height LCD display, and the LCD brightness can be graded and adjusted to adapt to external environmental changes. This instrument can measure the true effective value of DC voltage and AC voltage, DC current and AC current (clamp), resistance, capacitance, Celsius, Fahrenheit, diode, continuity and other functional parameters, and has data hold and NCV/LIVE (live wire judgment) functions. 1.Display mode : LCD display; 2. Maximum display: 5999 (3 5/6 bits) automatic polarity display; 3. Measurement method: double integral A/D conversion; 4. Sampling rate: about 3 times per second; 5. Over range display: the highest bit display "OL"; 6. Low voltage display: "" symbol appears; 7. Operating temperature:0℃ ~ 40℃, &lt;75%RH; 8. Storage temperature :-10℃ ~ 50℃, &lt;80%RH; 9. Battery type: 3.7V lithium battery; 10. Maximum opening size of clamp head: diameter 32mm 11. Maximum measured current wire: diameter 22mm 12. Size: 170×64×26 mm 13. Weight: approx.146g (including batteries) 

Digital Clamp Meter

  Introduction :  
Digital clamp meter integrated with AC / DC hall effect sensor, 3-3/4 Digit 6000 Count, True RMS, auto and manual measurement.

  Advance features :  
- Wide response band width.
- Large LCD display.
- Audible sound and visible indication during continuity check.
- Non-contact Frequency detection &lsquo;NCF&rsquo; 50 / 60 Hz
- Software calibrated.

  Specifications :  
- True RMS
- 6000 counts (3-3/4 digit)
- Auto / Manual &lsquo;V&rsquo; (600V AC)
- Auto / Manual &lsquo;V&rsquo; (AC ) with Hz / % selectable
- Auto / manual resistor measurement (60M&Omega;)
- Continuity check : &lt;50&Omega; Beep
- Diode check : 3.000 V
- 600A / 600A (AC / DC) current
- AC current with Hz / % selectable
- Capacitance : 10nF - 100mF
- Frequency 10Hz - 10MHz
- Hz / Duty cycle 1-99%
- &lsquo;NCV&rsquo; Non-Contact AC Voltage Detection (Audible and Visible) &gt; 100V : Numerical digital display AC voltage strength
- Freeze / Hold reading
- Auto power off : (5 mins)
- Anti Burn Protection (ABP) on full range and up to 250V (AC / DC) (NOT at &mu;A / mA CURRENT)
- &lsquo;NCF&rsquo; Non-Contact Frequency Detection
- Relative reading (Rel)
- Input impedance 10M&Omega;
- &lsquo; OL &rsquo; Over range display
- Low battery indication (2.6V approx.)
- Maximum Conductor diameter for measurement (mm) &lt; &Oslash;50
- Maximum open jaw (mm) : &Oslash;50
- Measurable temperature from thermocouple -50&deg;C ~ 1000 &deg;C (-58&deg;F ~1832&deg;F)&nbsp;
- &#39;K&#39; type temperature Ni-Cr and Ni-Si sensor, temperature range measurable -40&deg;C ~ 250&deg;C ( -40&deg;F ~ 482&deg;F) to be provided
- Battery powered : 1 x 3V (CR2032)
- Dimension (LxWxD) mm : 208x77x16
- Weight (approx.) grams : 140 (without battery)&nbsp;

Digital Clamp Meter with 6000 count 

Introduction : This is an external wireless connectivity Digital Multimeter Detector integrated with 6000 Count, True RMS, auto and manual measurement.One of the most advantages of the meter is wirelessly connect to Smart phone / Tablet / PC (require different external modules, sold separately) to view data, record reading, capture picture with data on it and send the information to headquarter.Key Specifications/Special Features : True RMS6000 counts (3-3/4 digit)Auto/manual rangeLarge LCD display with backlightAuto / Manual ‘V’ (AC / DC) (600V / 1000V)μA / mA / 10A (AC / DC)Require AC/DC external clamp adaptor input 600A, 1mV=1A sold separatelyAuto/manual resistor measurement : 0 - 60MΩ (approx.)Continuity check : &lt;50Ω Beep buzzer soundsCapacitance : 10nF - 100mFDiode check : 3.0 VInput impedance 10MΩ'NCV' Non-Contact AC Voltage Detection (Audible and Visible) &gt; 100V'NCF' Non-Contact Frequency DetectionFreeze / Hold readingAuto-power off (APO) : 5 mins approx. or always 'ON'Relative reading (Rel)Frequency / Duty cycle (Hz / % ) (10 - 10MHz / 1-99%)Backlight &amp; Max. / Min. / Max. - Min. displayLοw battery indication (2.6V approx.)Fitted with replaceable 600mA (Ø6x32mm) and 10A (Ø10x38mm) fast blow fuseStandalone mode : without external wireless moduleWireless connectivity transmit datato Smart phone/Tablet with iOS APPS or Android APPS(require external wireless module MS-WMB1, sold separately)'k' type temperature Ni-Cr and Ni-Si sensor,temperature range measureable -40℃ ~250℃（-40℉~482℉）to be providedMeasureable temperature from thermocouple -50℃~1000℃ (-58℉~1832℉ ）Data logger compatible (require external wireless with memory module MS-WMBM1, sold separately)Battery powered : 1 x 9V (6F22 / 6LR61 / 1604)Dimension (LxWxD) mm : 188x96x56Weight (approx.) grams : 415 (without battery)

Wireless Connectivity Digital Multimeter 

AC DC Current Mini Size 2000 Counts Portable Digital Clamp Meter HD Screen Display 25 mm Open Jaw Digital Clamp MeterKey attributesIndustry-specific attributesDisplay TypeDigital Only Measuring Current Range0.001A~100A Measuring Voltage Range0.001V~600V Measuring Resistance Range1Ω~20MΩ Measuring Capacitance Range1nF~2000uF Measuring Inductance RangeNO Other attributesPlace of OriginGuangdong, China Brand NameMestek Model NumberCM85C Operating Temperature0℃~40℃ Dimensions165*56*31mm Weight140g ColorBlack+Blue Product nameClamp Multimeter NameClamp Meter Manual Display1999 Counts Power supply2x1.5V AAA Batteries(not included) Safety LevelIEC61010-1, CAT III 600V FrequencyTest Frequency with AC Current Range Data holdYes BacklightYes NCVHave Packaging and deliveryPackaging DetailsColor Box PortShenzhen,Hong Kong, Shanghai, Yantian Shenzhen Mestek Electronics Co.,LTD,business mogel for testing instruments for more than 15 years.Our engineers have been in this industry for over 15 years and served some of the most famous customers from all over the world.We can provide below services for all our partners in this challenging world.1.Fast delivery,1~5 days delivery time for Mestek Products.2.Small MOQ requirementsfor all our items, 1PCS is also acceptable.3.Exclusive Partnership in different regions4.OEM&amp;ODM Design services for brightideals.5.Free samples avaiable for partners.All our items are coming with CE certification and we have special team work for after sales services 7*24 to help you solve any kind of problem.We are ready for sign contract with you in case you need it, as honest dealer, we never crook our customers.Come and let us make a difference together !Product ParamentersModelCM85CDC voltage0.001V~600VAC voltage0.001V~600VDC current0.001A~100AAC current0.001A~100ADiode,True-RMS,Date hold,Backlight,Flashlight,Backlight,Auto power off,NCV detectSupportResistance1Ω~20MΩCapacitance1nF~20uF FAQ1. who are we?We are based in Guangdong, China, start from 2014,sell to Domestic Market(40.00%),North America(20.00%),WesternEurope(12.00%) There are total about 51-100 people in our office.2. how can we guarantee quality?Always a pre-production sample before mass production;Always final Inspection before shipment;3.what can you buy from us?Digital Multimeters,Digital Clamp Meters,Industrial Infrared Thermometers,Laser Distance Meters,AC Voltage Detectors,Plastic Casefor Digital Multimeters,Plastic Case for Digital Clamp Meters,Plastic Case for Industrial Infrared Thermometers,Plastic Case forLaser Distance Meters,Plastic Case for AC Voltage Detectors4. why should you buy from us not from other suppliers?Shenzhen Mestek Electronics Co., Ltd,business mogel for testing instruments for more than 15 years. All our items are coming with CE certification and we have special team work for after sales services 7*24 to help you solve any kind of problem. 

Mini Clamp Meter CM85C

MESTEK DM91S Smart Multimetro Digital Multimeter AC/DC Voltage Current Multi Meters with NCV Data Hold 9999 Counts FlashlightKey attributesIndustry-specific attributesMeasuring Current Range0~10A Measuring Voltage Range0~600V Measuring Resistance Range0~99.99MΩ Measuring Capacitance Range0~99.99mF Other attributesPlace of OriginGuangdong, China Brand NameMestek Model NumberDM91S Measuring Inductance Rangemultimeter Operating Temperature0℃~40℃ Dimensions1600*120*60mm ColorBlack+Blue Operating ModeSmart measure Fuse blow alarmSupport BacklightYes Count10000 counts Operating EnvironmentIEC61010-1,CAT III 600V Capacitance Resolution0.001nF/0.01nF/0.1nF/0.001uF/0.01uF/0.1uF/0.001mF/0.01mF True RMSYes Battery volatge measure1.5V/9V LIVE Fire Wiremulti meter Packaging and deliverySelling Units:Single item Single package size:16X12X6 cm Single gross weight:0.350 kgShenzhen Mestek Electronics Co.,LTD,business mogel for testing instruments for more than 15 years. Our engineers have been in this industry for over 15 years and served some of the most famous customers from all over the world.We can provide below services for all our partners in this challenging world.1.Fast delivery,1~5 days delivery time for Mestek Products.2.Small MOQ requirementsfor all our items, 1PCS is also acceptable.3.Exclusive Partnership in different regions4.OEM&amp;ODM Design services for brightideals.5.Free samples avaiable for partners.All our items are coming with CE certification and we have special team work for after sales services 7*24 to help you solve any kind of problem.We are ready for sign contract with you in case you need it, as honest dealer, we never crook our customers.Come and let us make a difference together !Selling pointsDisplay10000 COUNTSModelDM91SSmart measure√Non-contact AC Voltage Detection√Data Hold√Display Backlight√Continuity Buzzer &lt;50Ω√Fuse blow alarmSupportAuto shut-down1.5/9V FAQ1. who are we?We are based in Guangdong, China, start from 2014,sell to Domestic Market(40.00%),North America(20.00%),WesternEurope(12.00%) There are total about 51-100 people in our office.2. how can we guarantee quality?Always a pre-production sample before mass production;Always final Inspection before shipment;3.what can you buy from us?Digital Multimeters,Digital Clamp Meters,Industrial Infrared Thermometers,Laser Distance Meters,AC Voltage Detectors,Plastic Casefor Digital Multimeters,Plastic Case for Digital Clamp Meters,Plastic Case for Industrial Infrared Thermometers,Plastic Case forLaser Distance Meters,Plastic Case for AC Voltage Detectors4. why should you buy from us not from other suppliers?Shenzhen Mestek Electronics Co., Ltd,business mogel for testing instruments for more than 15 years. All our items are coming with CE certification and we have special team work for after sales services 7*24 to help you solve any kind of problem. 

MESTEK DM91S Smart Multimeter

3 3/4-digit LCDOverload protectionAuto power offVoltage DC: 4-40-400-1000VVoltage AC: 4-40-400-750VCurrent AC: 40A-400A-1000AResistance 400Ω-4kΩ-40kΩ--400kΩ-4MΩ-40MΩCapacitance 40nF-400nF-4μF-40μF-400μF-4000uFFrequency 9.999Hz-9.999MHzDuty Cycle 5%~95%Continuity &amp; Diode CheckCAT III 1000V

EM4653 Digital Clamp Meter

3 1/2-digit LCD, with a max. reading of 1999Autorange clamp meterMax.measurement conductor:Ø25mmAC Voltage: 2V-20V-200V-600VDC Voltage: 200mV-2V-20V-200V-600VAC Current: 2A-20A-200A-600AResistance: 200Ω-2kΩ-20kΩ-200kΩ-2MΩ-20MΩDiode &amp; Continuity test: YesPower: 3V CR2032 button cell, 2 piecesCAT III 600V

EM305A Digital Clamp Meter

AC leakage current measurement1μA high resolution on 6mA rangeMin/Max mode and relative measurementDC Voltage: 600mV-6V-60V-600VAC Voltage: 6V-60V-600VAC Current: 6mA-60mA-600mA-6A-60AResistance: 600Ω-6kΩ-60kΩ-600kΩ-6MΩ-60MΩDiode &amp; Continuity check: YesSize: 216 x 78x 42 mmBattery: 1.5V AA, 2 pieces

EM462A AC Leakage Current Clamp Meter

Mestek 9999 Counts Smart Range Resistance Capacitance AC DC Voltage Ohmmeter NCV Multimeter Automotive Digital MultimeterKey attributesIndustry-specific attributesMeasuring Current Range0~600mA Measuring Voltage Range0~600V Measuring Resistance Range0~10MΩ Measuring Capacitance Range1uF~6000uF Other attributesPlace of OriginGuangdong, China Brand NameMestek Model NumberDM97S+ Measuring Inductance RangeA Operating Temperature0~40 Dimensions180*120*40mm DC voltage (V)0~600V AC voltage (V)0~600V Maximum Display9999 DisplayDigital ScreenColor Screen NCVyes Ture RMSyes Ambient Temperatureyes Weight310g Temperature Probe-20~1000°C/-4~1832°F Packaging and deliverySelling Units:Single item Single package size:13.9X6.8X1.8 cm Single gross weight:0.500 kgSpecificationitemvaluePlace of OriginChinaGuangdongBrand NameMestekModel NumberS20Measuring Voltage Range0.1V~1000VMeasuring Resistance Range0.1Ω~60MΩMeasuring Capacitance Range10pF~60mFDimensions139*68*18mmDC voltage (V)0.1V~1000VAC voltage (V)0.1V~750VResistance0.1Ω~60MΩCapacitance10pF~60mFFrequency0.1Hz~8MHzMaximum Display6000Size139*68*18mmWeight175gNCVyesTure RMSyesShenzhen Mestek Electronics Co.,LTD,business mogel for testing instruments for more than 15 years. Our engineers have been in this industry for over 15 years and served some of the most famous customers from all over the world. We can provide below services for all our partners in this challenging world. 1.Fast delivery,1~5 days delivery time for Mestek Products. 2.Small MOQ requirements for all our items, 1PCS is also acceptable. 3.Exclusive Partnership in different regions 4.OEM&amp;ODM Design services for bright ideals. 5.Free samples avaiable for partners. All our items are coming with CE certification and we have special team work for after sales services 7*24 to help you solve any kind of problem. We are ready for sign contract with you in case you need it, as honest dealer, we never crook our customers. Come and let us make a difference together !FAQ1. who are we?We are based in Guangdong, China, start from 2014,sell to Western Europe(30.00%),Domestic Market(22.00%),North America(20.00%),Eastern Europe(10.00%),Southeast Asia(3.00%),Oceania(3.00%),Mid East(3.00%),Eastern Asia(3.00%),South America(2.00%),Africa(2.00%),South Asia(2.00%). There are total about 51-100 people in our office.2. how can we guarantee quality?Always a pre-production sample before mass production;Always final Inspection before shipment;3.what can you buy from us?Digital Multimeters,Digital Clamp Meters,Industrial Infrared Thermometers,Laser Distance Meters,Voltage Testers4. why should you buy from us not from other suppliers?Shenzhen Mestek Electronics Co., Ltd,business mogel for testing instruments for more than 15 years. All our items are coming with CE certification and we have special team work for after sales services 7*24 to help you solve any kind of problem. 

Digital Multimeter Smart DM97S+

Zhangzhou Huayi Electronics Co Ltd

 	 DCV ACV ACA OHM 	 Continuty Beeper: yes 	 Insulaton test: yes 	 Data Hold: yes 	 Power: 9V 6F22 	 Maximum Display: 1999 	 Display Size: 14 x 47mm 	 Product Net Weight: 320g 	 Product Size: 230 x 90 x 37(mm)  

DCV:1000V +/-(0.5%+1),ACV:750+/-(1%+4),ACA:200A-1000A +/-(2%+5),OMH:200-20K ohm(2%+2),continuty 
    Beeper:yes, power :9V 6F22 maxium,display:1999 display, size:14*47mm   Product net weight:320g,product size:230*90*37(mm),quantity:20pcsM  Dimension:51.2*28.5*27.3(mm) G.W. :10.5KGS N.W.:9.5KGS  

  - This clamp meter has a handle which makes it very handy for use.  - It is suitable for electricians and handymen.  - It is equipped with a continuity beeper and can carry out insulation test.  - It can also hold the data measured.  - DCV: 1000V +/- (0.5%+1).  - ACV: 750V +/- (1%+4).  - ACA: 200A - 1000A +/- (2%+5).  - OHM: 200 - 20k onm +/- (2%+2).  - Power supply: 9V 6F 22.  - Maximum display: 1999.  - Product size: 230x90x37mm.  

 	 When connected through External Bluetooth device transmit data to Smart phone / Tablet / PC using iOS APPS / Andriod APPS / PC sofware 	 CAT II, 600V (AC/DC); CAT III, 300V (AC/DC) 	 Count / Digit : 2000/3-1/2 	 Auto / Manual voltage 	 Auto / Manual &Omega; 	 Diode check 	 Continuity 	 AC current measurement 	 Single Probe Test AC Voltage 	 NCD 	 Anti-Burn Protect on full range 	 Over range display 	 Maxi. open jaw 30mm 	 Low battery indication 	 input impedance  

My Sourcing

Unfollow this supplier?

Unfollow this supplier?