High Technology Manufacturing Ltd

   POWER SOURCES : 100 - 240VAC~50/60 Hz 100Ma   OUTPUT POWER : 14.5VDC = 150Ma   DIMENSIONS : 178 x 78 x 325mm (WxDxH)   NET WEIGHT : 1.72 kg   APPLICATION : INDOOR USE only; For Industry, Warehouse, Personal Care, Residence, Commercial and Agribusiness.   PACKING :Gift box packing for 1 piece.  

Home Protector Alarm

Sonicstar (Guangzhou) Electronics Co., Ltd.

The home audio system can play sounds of iPods and iPhones as well as FM radio programs. It can be manipulated easily via a full-function remote control. It complements your audio entertainments with high-fidelity sounds.
 
  20 channel and 6 channel shortcut keys. 
  RCA 3.5mm audio input. 
  USB MP3/SD card slots. 
  Output power of the power amplifier: 20W x 2RMS (1kHz 1% THD). 
  Speaker driver: 4&quot;x2. 
  Impedance: 4 ohm. 
  Built-in EQ mode. 
  Clock and&nbsp;alarm functions. 
  Net Weight: 15kg. 
  Gross Weight: 16kg. 
 

Home Audio System

Rondish Co Ltd

The Fall Detection - Emergency Transmitteris a wearable device that's ideal for hospitals, elderly homes &amp; individual homes. It can be worn as a wristband TXP-11(V2) or pendant TXP-11. Designed for the care of elderly, disabled and handicapped persons. Worn as either wristband or pendant, and allow patients to call for emergency alarms. Programmable automatic fall-alert is available Features of TXP-11(V2) • Active emergency button sends signal to central monitor or feild receiver • Lanyard option with anti-ligature point (not included) • Acceleromater to trigger call in case of patient fall (recommended for wristband only) • Reset signal triggered using magnetic switch • Changeable battery - uses CR2450 • Waterproof to IP65   

Fall Detection Wristband (With Panic Call Button) Emergency Transmitter

Anti-Wandering Door Monitor The system will help caregivers watch over patients who are at risk for wandering. It immediately alerts caregivers when patients wearing wristband tags move within range of protected doors, providing an audible and visual alarm.It functions with just a door alarm and a resident wristband. Mount the door monitor alarm by any exit or doorway in your care facility, plug it in and place wristband on resident.  The 2 basic components are : A door strip sensor (DMS-21) to be affixed next to protected doorPatient wristband transmitter (TXP-21)Features : Immediate audible and visual alert when patient wearing wristband transmitter move within the range of protected doorsEasy installation with easy range settingOption to connect with door lock when alarm is triggeredLow battery detectionMultiple reset options availableProgrammable wristband codingCan be used for a single door, or with a central monitor to watch over a larger areaIf central monitor is used, the door strip sensor is automatically fault-checked to ensure operationsWristband with unbreakable strap is available for optionAlerts when resident exits through protected doorAdjustable detection range (short, med, long)Programmable with area code, door number, andlock time (electronic lock not included), and dooropen too long alertsOptional electric/magnetic lock functionalityAlarm bypass allows caregiver to escort residents through a protected door without activating alarmAnti-tailgating functionalityAlarm output: low-power signal allows integration with Rondish wireless products, or NO/NC relay allows interfacing with 3rd party equipment

Anti-Wandering Door Monitor II- DoorWatcher Sensor

AEI Protect-On Systems Ltd

CD-272 is a dual function device that combines Cellular Dialer and Gate Opener in one unit. It is compatible with all Alarm Control Panel and Access Control Keypad for feature enhancement. It can make alarm report to 5 preset phone numbers and remote control the access control keypad via mobile App "Gate Plus". Dialer &amp; Gate Opener Common Features Master Code for System Feature Programming AuthorizationMaster Code, Owner's Contact Phone Number, System Operation Mode and SIM Card Testing Interval Settings are Authoried with (MSA) Switch (Master-Setting-Authorization)Programmable 1-6 Weeks SIM Card Active TestingDialer Performs Signal Strength Testing with SMS Testing CommandFunction and Feature Programming with SMS from Mobile PhoneMaximum 30 Characters Including Space SMS TextExecute Dialing Immediately for Alarm Notification after Opener Comment Finish While System Has Been Busy in Dialer + Opener Mode. Dialer Section Five Telephone Numbers (1 Owner + 4 Auxiliary) for Receiving Alarm SMS and Ring Call. The Owner Number Also Receives System Status SMS.Telephone Number Can be 30 Digits MaximumThree Alarm Notification Formats: 1) SMS + Ring, 2) SMS Only, or 3) Ring OnlyTwo Isolated Input Terminals for Alarm Event Triggers. e.g. Burglar, Fire or OthersInput Terminals Independently Selectable for Ring Only to Prevent SIM Card ChargesInput Terminals Response Time Programmable between 1-10 Seconds to Prevent Arm-Disarm Ring Back Signal or Interference from External Alarm Control PanelProgrammable Inactive Timer after Dialing Prevents Undesirable Repeat TriggeringOne Alarm Output Relay with NC and NO Output Contacts to Drive External Device Gate Opener Section Operate with or without Authorization Phone Number1000 Authorization Phone Numbers Maximum to Operate The Gate OpenerText to Open for Pedestrian GateText to Keep Main Gate And Pedestrian Gate Temporarily Open with Super User CodeText to Temporarily Stop Operation of The Opener Section During The Time of After Office Hour or Nobody at HomeTwo Relay Outputs for Main Gate (O/P 1) And Pedestrian Gate (O/P 2) ActuationRelay Outputs Are Programmable for 2 – 60 Seconds (default 2 sec)Two Auxiliary Egress Button for Main Gate and Pedestrian Gate Actuation for Emergency Case

Cellular Dialer + Gate Opener

TFE HK Ltd

Featured here is an anti-tamper dual alarm that can be reset and suspended by infrared remote control. The rubberized housing offers protection against damage caused by dropping onto hard floors. A versatile mounting base and hanger are included for convenient attachment.
   Versions for pull cord operation or with optional sensor pads.   Nurse-call versions will connect to other systems for remote alarm signaling.   &quot;Suspend&quot; mode allows patient repositioning with adjustable stand-by time.   &quot;Reset&quot; mode puts the alarm into stand-by situation until re-activation by next use.   2 alarm sounds and low or high volume settings.   &quot;Silent&quot; mode for use with remote alarm signaling nurse-call systems.   4-digit ID code to match remote control to alarm and eliminate interference.   Easy cleaning of pull cord.  

Nursecall Anti Tamper Dual Alarm

Venture Global Ltd

This wireless driveway alarm system alerts you when a vehicle or a person arrives on your property at the driveway. The outdoor sensor is designed to operate wirelessly with great sensitivity. The alert system is ideal for monitoring vehicles in both home and business settings upon entering and exiting. Multiple types of transmitters are available for your selection.  Each set includes 1 pieces of Wireless Driveway Alert Sensor and Wireless Driveway / Multi-Alert Receiver. detects a person or vehicle and alert you when approaches your home or premises. This alert system is suitable for driveways, business premises or back entrances.The whole alarm set is simple DIY and user friendly to set up. It’s recommended to add other sensors / transmitters to expand the system.SUB-1G RF frequency with wireless transmission range up to 300m / 1,000ft (direct line of sight) Wireless Driveway Alert Sensor (Transmitter) (DWS-100) Detect motion up to 12 metersAdjustable sensitive to ignore false alarms and small animalsIncludes narrow aperture lens to reduce the detection distance and to narrow the detection angleIncludes sun shades to eliminate false from moving brushes and direct lightEasy installation and have adjustable swivel bracketLED indicator that shows it is working during set upIP 45 water splash proof housingDriveway / Multi-Alert Receiver (DWA-800) Monitors 4 zones and each zone can pair up-to 4 sensors / transmitters (max. total 16 sensors)90dB loud and clear sound with 32 melodies for selection2 replays output and adjustable activation timeWith Power on / off and adjustable volume controlLow battery indicator

Wireless Driveway Alert

  Passive Infrared Sensor  
An alternative to sensor pads in bed monitoring. The PIR alarm has a thin, curtain-like motion detector beam, which monitors a narrow area beside the bed. When the beam is interrupted, the sensor detects motion and triggers the alarm. As with all contactless devices there are no infection control issue. The PIR sensor can be set up as an stand-alone alarm unit, or forward signals to a fall monitor or caregiver pager to remove&nbsp;in-room&nbsp;alarm noise.

  Features :  &nbsp; 	 LED status indicator (Red - Alarm / Blinking Red - Low Battery / Green - Pause) 	 Can be set up as an stand-alone alarm unit (Internal alarm) 	 Wireless works with a fall monitor, pager or central panel. Range up to 200m (600 feet)&nbsp;&nbsp; 	 Pause mode allows caregiver to tend the patient without triggering an alarm 	 Automatically re-arms if no movement is detected in 15 sec. 	 Easy reset button 	 Adjustable detection range 	 Horizontal or vertical detection options 	 3xAA type battery operated 	 Low battery alert 	 DC (6V) input option  

PIR Sensor

GUARDMAN® Bathroom Pull Alarm is an ideal product to call for help in emergency. When someone is in need, just pull down the cord of the Pull Station, it will send a wireless signal to the receiver to alert the caregiver.  • Just one pull of the cord of the Pull Station (transmitter), it transmits a wireless alert signal to the receiver. • SUB-1G RF frequency with wireless transmission range up to 300m / 1,000ft (direct line of sight)  Wireless Emergency Pull Station (Transmitter) • IP55 Water splash proof design • Can be mounted to the ceiling or the side wall • 2-meter long pull cord with adjustable length and 2 pull handles • Handle can be triggered by one finger • Low battery indication on receiver unit  Vibrating Pager (Receiver) • Capability to pair up-to 4 different GUARDMAN® sensors / transmitters • With LED indicator icon for each zone / channel • Clear and loud sound with 18 melodies for selection • 3 selectable operating modes: sound / vibrating / sound &amp; vibrating • With built-in belt clip 

Bathroom Pull Alarm

Any leakage of water will trigger this flood detector and alarm to emit loud and clear sound with a bright LED light alert. It is often placed where a potential leakage or overflow may occur. This water sensor alarm notifies homeowners or office workers of water leaks, while it is also able to transmit wireless signal to the wireless receiver. Detects over-flow or leakage of water Trigger alarm and / or LED flashlight if detects any leakage of water.Press the stop button on the device to stop the alarm.Super bright LED flashlight and loud siren at 100dBIP3X Water splash-proof designed encloseIndividual button to control each function includes Power On/Off, Transmission, Flashlight, Siren AlarmAble to transmit wireless signal to the wireless receiver. SUB-1G RF frequency with wireless transmission range up to 300m / 1,000ft (direct line of sight)Low power consumption and long transmission range.Operated by DC batteries AAA x 3

Wireless Flood Detection Alarm

  Cordless Floor Sensor Mat&nbsp;(CMAT-02)  
The cordless non-slip floor mat for fall management will send an alarm signal when pressure is applied by stepping upon it. It reduces injuries from falls and alerts caregiver when resident needs help.&nbsp;

  Features :   	 Trigger alarm when pressure is applied&nbsp; 	 Cordless to remove a tripping hazard 	 Size : 48&rdquo; x 24&rdquo; (122 x 61cm) 	 Heavy duty &amp; non-slip material&nbsp; 	 Constructed with durable vinyl cover, latex free 	 Must work with our wireless transmitter (TM-11)  

Floor Sensor Mat (Cordless)

TAT Electronics Co.,Ltd

 	 Rated Voltage: 5V 	 Operating Voltage: 1-25V 	 Sound Output at 10cm: 85dB 	 Resonant Frequency: 4000Hz  

Piezo Transducer

  LED Indicator Light   are the nurse call system&rsquo;s basic device for visually signaling the patient calls to medical personnel in corridors. It is mounted above (or next to) the doorway of each patient room or installed at corridor intersections to denote a zone of rooms, the indicator light will produce a bright light and tone that is easily seen and heard both at great distances. As a result, nurses and staff members are quickly directed to the source of a call.&nbsp;

  Features :   	 Dual colored (Red &amp; White) light indication&nbsp; 	 Distinctive appearance &amp; sound, no confuse with fire alarm 	 Adjustable volume 	 Re-transmit wireless signal to extend range to pager or central monitor unit 	 Night light option to illuminate path to toilet 	 Memory for up to 15 wireless devices 	 Battery back-up in case of power loss 	 Low battery indication  

Indicator Light

Zhuhai Fujing Technology Co., Ltd.

 	 Include 1,000,000 wireless code combinations 	 Safe and reliable 	 Totally wireless configuration 	 Automatically 	 DIY pair to add unit 	 Easy to operate 	 Low power consumption 	 Low voltage indicator 	 Long endurance life  

Wireless Alarm Kit

Under-Mattress Sensor Pad is our new generation of sensor bed pad series which provides a comfortable, reliable &amp; invisible option for non-intrusive bed monitoring. Coupled with our wireless / wired bed monitors, it detects patient's presence on the mattress &amp; alerts caregiver when a patient gets off from bed. The sensor pad is placed under the mattress. Fits onto the center panel of most elderly care beds. It functions unnoticeably under the mattress with low hygiene risk &amp; less body contact problem. Designed for the care of elderly, disabled, and handicapped persons. Sensorpad triggers an alert when patient exits their bed, works beneath most foam mattresses. USB connection for transmitter or cable Features : • Triggers alarm when patient exits their bed• Usable with either cable or transmitter• Eyelets for securing to a bed frame. Works best under foam mattresses 14-16cm inches thick• Durable and long-lasting - 18 month warranty• Care instructions written on pad• 100% latex free Technical Specifications Standards Cable:2m with RJ10 plug (NO) and USB break point Material: PVC &amp; PET Dimensions: 83 x 26cm Net weight: 620g Operating temp.: 5°C to 40°C Operating weight:30 - 200kg Internal resistance: &lt; 1200 Ω Recommended cleaning: 1:100 solution of household bleach (5.25 - 6.15% sodium hypochlorite) 

Cordless Under Mattress Bed Sensor Pad

 	 Chair / Bed Sensor Pad 	 Foldable Air Ventilation Pipe  

Sensor Mat

 The anti-tamper car alarm is equipped with a rubberized housing for protection against damage caused by dropping onto hard floors. The compact design allows efficient use of space. The &quot;suspend&quot; mode allows patient repositioning with adjustable stand-by time.  	 Versions for sensor pads only. 	 Tamper-free resetting and suspension by infrared remote control. 	 Nurse-call versions will connect to other systems for remote alarm signaling. 	 &quot;Reset&quot; mode puts the alarm into stand-by situation until re-activation by next use. 	 2 alarm sounds and low or high volume settings. 	 &quot;Silent&quot; mode for use with remote alarm signaling nurse-call systems. 	 4-digit ID code to match remote control to alarm and eliminate interference. 	 Easy cleaning of pull cord. 	 Versatile mounting bass and hanger included.  

Anti-Tamper Care Alarm

GUARDMAN® Wandering Prevention System is a DIY Elderly Monitoring System, ideal for alerting caregivers when persons with Impaired Memory Syndrome like Dementia OR with Alzheimer’s disease step out of the protected zone accidentally.  • The transmitters can be ideally placed on the door/window OR down the pathway leading to the Monitored Zone Exit. • Once the Transmitter is triggered, it will send a wireless signal to the Receiver unit, alerting the caregiver. • SUB-1G RF frequency with wireless transmission range up to 300m / 1,000ft (direct line of sight).  Wireless Door / Window Alarm (Transmitter) • Ultra-thin profile &lt;8.5mm thick. Suitable for installation on sliding doors/windows. • Transmits a wireless signal to the receiver unit and triggers an alert sound once the door/window is opened. • Loud 95dB alert sound. Dual tone selection. • Cyclical alert continues if the door/window is left open/unattended. • Low battery indication on the receiver unit. Wireless Indoor Motion Detector (Transmitter) • Can be placed down the pathway leading to the Protected Zone Exit. • PIR sensor detects range up to 7m and +/- 30 degrees. • Sensor with swivel joint design. • Transmits a wireless signal to the receiver unit when someone enters the monitored zone. • Low battery indication on the receiver unit. Wireless Entry Mat (Transmitter) • Slip resistant. Can be placed under the door mat/rug. • IP55 weather proof. • Transmits a wireless signal to the receiver unit when someone steps on the door mat/rug • Low battery indication on the receiver unit. Vibrating Pager (Receiver) • Loud sound up to 95dB. Selection of 18 different alarm tones available. • 3 selectable operating modes: sound / vibrating / sound &amp; vibrating. • Configurable with up to 4 different GUARDMAN® sensors / transmitters. • LED indicator icon available for each zone / channel. • Portable built-in belt clip 

Wandering Prevention System

The voice alert offers a choice of the high volume, low volume or silence mode with flashing light. It allows you to record your own alert messages or instructions with a voice that is familiar to the patient. This piece also enables a caregiver to receive a remote alarm signal if it is connected to an existing nurse call system via a 6.3mm mono jack.   Bed, wheelchair or entrance alarm with voice function.   The alert is activated by the magnetic switch with cord and clip or optional sensor pads via the RJ9 socket.   Dual use with sensor pad option to alarm when the pad is either stepped on or off.   Tampering resistant suspending mode: stop monitoring temporarily to facilitate patient repositioning without triggering an alarm.   Battery low indicator to ensure uninterrupted patient monitoring.   Versatile clip and mounting bracket are included.  

Nursecall Voice Alert

Foldable Floor Sensor Mat (Cordless)Weight-sensing floor matare placed next to a bed or in a doorway and connected to a monitor. When a resident gets out of the bed or attempts to leave the room and pressure is applied by stepping upon the mat, the monitor will alarm to notify caregivers.Features :	Trigger alarm when pressure is applied	Cordless to remove a tripping hazard	Size : 36" x 24"	Foldable design for easy storage &amp; transportation	Beveled edges allows easy wheelchair access	Heavy duty,composed of texture&amp; non-slip material	Constructed with durable vinyl cover, latex free, anti-microbial&amp;fire retardant 	Must work with our wireless transmitter (TM-11)

Foldable Floor Sensor Mat (Cordless)

Foldable design for easy storage and transportation. It detects and alerts caregiver when a frail &amp; vulnerable patient / resident rises or moves off the pad.  Features : Foldable design for easy storage and transportation30” x 20” (76 x 51cm)Trigger alarm when patient exits bedAnti-bacterial surfaceCare instructions printed on the padThe pad is sealed for incontinence protectionUSB break-cable to protect monitor• 100% latex free 

Foldable Bed Sensor Pad

The Chair Sensor Padworks with all Rondish standard fall monitors. It detects and alerts caregiver when a frail &amp; vulnerable patient / resident rises or moves off the pad. Designed for the care of elderly, disabled, and handicapped persons. Chair sensorpad triggers alert when individual stands up.USB mini enables wired or wireless usage with an alarm unit. Durable and long-lastingFeatures : Triggers alarm when resident exits their chairDurable and long-lastingUsable with either cable or transmitterCare instructions written on pad100% latex freeCorded or cordless 2-in-1 15" x 10" (38 x 25cm) Mini-USB plug for breakaway cable or wireless transmitter (TM-11U) 18-month lifespan FCC,CE certificate, ISO 13485:2016 , ISO 9001: 2015 

Universal Chair Sensor Pad ( Corded or cordless 2-in-1 )

MEINOE INDUSTRIAL (HK) COMPANY LIMITED

 	 Size: 41 x 30 x 9mm 	 Product weight: 40g 	 QTY:100pcs 	 MEAS: 37 x 35 x 32cm 	 G.W/N.W:7kgs/6.5kgs  

Wrist Alarm

  Under-Mattress Sensor Pad   is our new generation of sensor bed pad series which provides a comfortable, reliable &amp; invisible option for non-intrusive bed monitoring. Coupled with our wireless&nbsp;/ wired&nbsp;bed monitors, it detects patient&#39;s presence on the mattress &amp; alerts caregiver when a patient gets off from bed. The sensor pad is placed under the mattress. Fits onto the center panel of most elderly care beds. It functions unnoticeably under the mattress with low hygiene risk &amp; less body contact problem.&nbsp;

  Features :   	 Triggers alarm when pressure is released 	 30&rdquo; x 10&rdquo; (76 x 25cm) 	 Works beneath most mattresses. Removes the discomfort&nbsp;created by over-the-mattress pads 	 Fits onto the center panel of most elderly care beds 	 Invisible to users, provide non-intrusive bed monitoring 	 Lower hygiene risk &amp; less body contact problem 	 USB break-cable to protect monitor​&nbsp;  

My Sourcing

Unfollow this supplier?

Unfollow this supplier?