The Certificate Verification Services (the “Services”) is provided by SGS Hong Kong Limited (“SGS”) pursuant to its General Conditions of Services, available on <a href='https://www.sgs.com/-/media/sgscorp/documents/corporate/technical-documents/legal-documents/conditions-of-services/sgs-cts-hong-kong-terms-and-conditions-a4-en-15-05.cdn.en.pdf' target='_blank'>https://www.sgs.com/-/media/sgscorp/documents/corporate/technical-documents/legal-documents/conditions-of-services/sgs-cts-hong-kong-terms-and-conditions-a4-en-15-05.cdn.en.pdf</a>. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues as defined therein. Notwithstanding the foregoing: A certificate and/or document that is submitted by an Advertiser will be endorsed by SGS as authentic and valid upon the verification of the information (where applicable) below by SGS, basing on the (i) SGS’ know-how; (ii) information provided by the Advertiser; and (iii) reputable publicly available sources at the time the Services are provided: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;1. Nature and title of the certificate and/or document; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;2. Scope and type of certification and/or document; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;3. Issuing authority of the certificate and/or document; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;4. Issuance and expiry date of the certificate and/or document; and &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;5. Image of the certificate and/or document. The Advertiser is responsible for providing any and all information about the certificate and/or document that may be required to complete the Services. Although SGS shall make every effort to ensure the accuracy and contemporariness of the information provided by the Advertiser and any such publicly available sources during performance of the Services, SGS has no control of and thus cannot guarantee the absolute accuracy and authenticity of such information. Therefore, SGS shall disclaim any and all liability for the accuracy of such information. The Services do not warrant that the goods and/or services of the Advertiser will meet any particular criteria of quality or performance. The Advertisers and any third party are responsible for their decisions to make whatever use of the results of the Services and shall accept all risks for any loss or damage of any kind that may occur. SGS accepts no liability for the consequences of any action taken or not taken on the basis of the results of the Services by the Advertisers and any third party. SGS provides the Services in a consulting basis. The Services does not constitute a legal opinion and they are no substitute for professional legal advice to ensure compliance of the Advertiser with the applicable laws and regulation. This Disclaimer has been translated into Chinese. If there is any inconsistency between the English version and the Chinese version, the English version shall prevail.

TÜV Rheinland 'Certificate Verification & On-Site Inspection Services' ("the Services") do not endorse, represent or warrant any product, process or service. The services only presents the documents, files and information which collected from audited enterprise of TÜV Rheinland Group, not including the subjective analysis of the enterprise status, legal advice, any suggestions related to legal issues, any compliance of local/international requirements and product testing compliance. The services only reflects our findings for the particular company in concern on the date and does not discharge or release the factory/sellers/suppliers from their commercial, legal or contractual obligations with buyers in respect of products provided by the factory/sellers/suppliers. Any reader other than the party for which the services has been specifically issued is hereby informed that the General Conditions of Service of TÜV Rheinland contain liability limitation provisions.

TUV Rheinland

TÜV SÜD 'Certificate Verification Services' ("the Services") do not endorse, represent or warrant any product, process or service. The services only presents the documents, files and information which collected from audited enterprise of TÜV SÜD Group, not including the subjective analysis of the enterprise status, legal advice, any suggestions related to legal issues, any compliance of local/international requirements and product testing compliance. The services only reflects our findings for the particular company in concern on the date and does not discharge or release the factory/sellers/suppliers from their commercial, legal or contractual obligations with buyers in respect of products provided by the factory/sellers/suppliers. Any reader other than the party for which the services has been specifically issued is hereby informed that the General Conditions of Service of TÜV SÜD contain liability limitation provisions.

TUV SUD

This Certificate Verification Service (hereinafter called “Verification”) is made solely on the basis of information and materials supplied by Advertiser (Applicant). Intertek relies exclusively on the accuracy and completeness of the information provided to us, and has not undertaken any separate verification of the information contained therein. Intertek provides no warranty and is not responsible for the authenticity, completeness and accuracy of the information. Intertek does not endorse, represent or warrant any product, process or service of the Advertiser. The Verification only reflects our findings for the Advertiser in concern on the date and does not discharge or release Advertiser from legal obligations and duties to any other person. The Verification is not intended to be a recommendation for any particular course of action, reader is responsible for acting as to see fit on the basis. Intertek accepts no responsibility to any parties whatsoever, following the issue of the information, for any matters arising. The Advertiser shall indemnify and hold harmless Intertek from and against any and all claims, suits, liabilities (including costs of litigation and attorney’s fees) arising, directly or indirectly, out of or in connection with the services provided. Except where explicitly agreed in writing, all work and services performed by Intertek is subject to our standard Terms and Conditions which can be obtained at our website: <a href="https://www.intertek.com/WorkArea/DownloadAsset.aspx?id=46796" download>Intertek Standard Terms and Conditions of Services (China)</a> . Intertek's responsibility and liability are limited to the terms and conditions of the Application Form.

INTERTEK

https://sourcing-media.hktdc.com/store-original/FREE-LIGHTING-LIMITED/73e2309c9e2e44a6a8130a369c2d4cb7

Product/Service Highlights

FREE LIGHTING LIMITED

FREE LIGHTING, is a professional LED lighting manufacturer, located in Shenzhen, China.
We strived to provide high Credibility products and Customized solutions with advanced technologies to our customers for the past 17 years.
We are happy to supply an annual output of 4.8 million LED light bulbs and 740,000 dimmers to worldwide customers.

We never settle for less!
We started to work on LED miniature lamp in 2013.
We developed FREE LIGHTING ceramic miniature series, and launched the first patented G9 lamp in 2014 to solve problems such as low lumen, poor color performance and high decay issue for LED miniature lamp. 
In 2017, we passed the first 10000hrs aging test on our 4.5W dimmable G9 lamp, which also successfully passed the ERP, JA8 and Energy Star lifetime test. 
We also developed FREE LIGHTING LED dimmer series and launched in 2019 to solve the matching problem of LED dimmer.

Why Customer Choose Us?

Strong R&D Support
We are not afraid to invest in future.
We are fully equipped with advanced test machines to shorten the development cycle for our customers. For example, we have EMC test system, surge test system, digital photometer and 3D printer for development.
Also, we have Photometric and electrical test system for quality control on mass production

High Efficiency R & D
We Love what we do! And we do it fast!
With rich experience and passion. We can finish a new project in 45 days！ So far we have developed over 538 ceramic molds and 413 LED bulbs which can match all specifications you need.

Complete Quality Control to Protect Your Brand
To protect your brand and company reputation with reliable product quality is our mission.
During the early stage of new product development, we will pay attention to all design details to ensure good and stable quality can be achieved during mass production. 
We perform 100% quality control for all products. 
Every light bulb requires to pass 4 procedures tests and 6-8 hours aging test before packing. Every dimmer need to pass 3 procedures tests before packing.
Besides, our skillful and stable workers are key contributors to maintain high quality standards. 

Dimmer Solutions: Simple & Easy Matching
We developed FREE LIGHTING LED dimmer series which are user friendly, simple and easy to work with over 128 model lightings from different brands. 

Confidentiality & Product Safety Guaranteed-88 Patents & Full Certifications
We are a company with Integrity.
We understand how important to secure your original ideas and designs so that you will stay competitive in the market 
We can promise all the certifications and tests from our factory are based on real test data.
You can trust us.

Professional Team to Serve You Better
FREE LIGHTING has 48 employees. We are responsible, hardworking and stable.
R&D Engineer Team and sales Teams work very closely to provide efficient and professional service to our customers. 
We will never stop improving...

My Sourcing

FREE LIGHTING LIMITED

Unfollow this supplier?

Unfollow this supplier?